Exam (elaborations)
NDT FINAL EXAM WITH (200) QUESTIONS AND VERIFIED ANSWERS
- Course
- Institution
NDT FINAL EXAM WITH (200) QUESTIONS AND VERIFIED ANSWERS...
[Show more]
Content preview
NDT FINAL EXAM WITH (200)QUESTIONS AND VERIFIED
ANSWERS
What does Method A refer to? - ANSWER Removal Methods
When is an unscheduled inspection performed? - ANSWER All Of the
above
The advantage that liquid penetrant testing has over an unaided visual
inspection is that: - ANSWER It makes defects easier to see for the
inspector
Which of the following is an advantage of Penetrant Testing? - ANSWER
Both A and B.
What are the major requirements needed to become qualified in any
NDT method? - ANSWER On the Job Training and Classroom
Instruction.
What manual reference identifies a non-aqueous Type I developer? -
ANSWER 5.04.5.A.4
The relevant indications of a post-FPI/LPI inspection can appear as
what? - ANSWER round circles, continuous line, and intermittent line
Referencing your manual reference material, what would you use for the
following penetrant system classifications?
Penetrant Type: Type 1
Method of Removal: Method C
Sensitivity Level: Level 3
Developer: Form d - ANSWER High sensitivity fluorescent dye
penetrant, solvent removable and nonaqueous, type I fluorescent
developer.
,You are assigned an FPI inspection on a suspected crack on an inlet
cowl of a 767 on the ramp during April in Chicago. You day time temp is
56 degrees, the sun is shining brightly. What is or are your challenge(s)
in performing this inspection? - ANSWER Your white light present at
your inspection area is going to be greater than 2 foot candles per your
paperwork.
If the surface of the part has been machined, surface blasted, filed or
sanded : - ANSWER The part may also require etching.
Which type of penetrant is only a visible dye penetrant? - ANSWER
Type II
Penetrants that are used to detect the smallest defects can create
background fluorescence indications on the part being inspected. Which
of the following best describes background fluorescence: - ANSWER All
of the above
Recall from your lab, when signing for your work, what is not required to
be included: - ANSWER Date of calibration for the equipment used
What factors can be used to perform/schedule a scheduled inspection? -
ANSWER Airframe Cycles, Calendar Time, Flight Hours
The best NDT technique to use to find defects below the surface of a
test piece made of aluminum would be what? - ANSWER Ultrasound
When performing quality control checks on your black light prior to your
FPI inspection, which of the following is correct? - ANSWER Both B & C
Before you begin a fluorescent penetrant inspection you should: -
ANSWER Both A & B
The most commonly used methods of nondestructive testing include: -
ANSWER Ultrasound, Magnetic Particle, Eddy Current, & Penetrant
When fluorescent penetrant inspection is performed, the penetrant is
formulated to glow brightly and give off light at a wavelength that: -
, ANSWER The eye is most sensitive to under dim lighting conditions
while using an ultra violet light source.
Which of the following identifies the qualification levels of Non
Destructive Testing: - ANSWER Level 1 Limited, Level 1, Level 2 &
Level 3
Generally, there is no harm in using a longer dwell time as long as the
penetrant: - ANSWER Remains on the part no longer than is allowed per
the procedure in use.
Which NDT technique uses a magnetic field to detect defects? -
ANSWER Magnetic Particle
It is important to know what type of defect you are looking for before you
perform any type of NDT inspection technique. - ANSWER True
Which level of penetrant is the most sensitive? - ANSWER Level 4
Which of the following is a disadvantage of Penetrant Testing? -
ANSWER Both A and B.
Calibration stickers are used in NDT to ensure what? - ANSWER
Ensures the equipment and materials used to perform NDT tests are
calibrated, legal, and will provide an acceptable level of performance.
Penetrants are designed to: - ANSWER Remain fluid so it can be drawn
back to the surface of the part
The skills and qualifications associated with NDT/NDE are only
applicable to the aviation industry. - ANSWER False
The most important step in any penetrant type inspection is: - ANSWER
Part preparation and cleaning
Which penetrant classification is further divided into sensitivity levels? -
ANSWER Type I
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller luzlinkuz. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
67096 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now