100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ASE BRAKES A5 TEST (EXAM 1), ASE A5 BRAKES, ASE BRAKES A5 (EXAM 3), ASE BRAKES A5 TEST (EXAM 2) ALL IN ONE PERFECT STUDYPACK UPDATED 2024 WITH DETAILED RATIONALES $15.99   Add to cart

Exam (elaborations)

ASE BRAKES A5 TEST (EXAM 1), ASE A5 BRAKES, ASE BRAKES A5 (EXAM 3), ASE BRAKES A5 TEST (EXAM 2) ALL IN ONE PERFECT STUDYPACK UPDATED 2024 WITH DETAILED RATIONALES

 4 views  0 purchase
  • Course
  • ASE BRAKES A5
  • Institution
  • ASE BRAKES A5

ASE BRAKES A5 TEST (EXAM 1), ASE A5 BRAKES, ASE BRAKES A5 (EXAM 3), ASE BRAKES A5 TEST (EXAM 2) ALL IN ONE PERFECT STUDYPACK UPDATED 2024 WITH DETAILED RATIONALES

Preview 4 out of 78  pages

  • September 26, 2024
  • 78
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • ASE BRAKES A5
  • ASE BRAKES A5
avatar-seller
Abdinurse
ASE BRAKES A5 TEST (EXAM 1), ASE A5 BRAKES, ASE
BRAKES A5 (EXAM 3), ASE BRAKES A5 TEST (EXAM
2) ALL IN ONE PERFECT STUDYPACK UPDATED 2024
WITH DETAILED RATIONALES

A drum is chattering on the brake lathe. This could be a result of

a. failure to install the dampening belt
b. cutting too slowly
c. dull cutting blades
d. cutting speed too fast
A : failure to install the dampening belt

why : a missing dampening belt could cause the drum to vibrate while on the
lathe. this vibration can cause the drum to bounce on the cutting tip and make a
chattering noise
A vehicle equipped with a hydro-boost brake system has a hard pedal with little
braking action. Which of the following could be the cause?

a. low brake fluid
b. air in the brake fluid
c. low power steering fluid
d. an overtightened power steering belt
C : low power steering fluid

why : low power steering fluid can cause the booster to provide very little if any
boost
Which of the following could cause excessive noise braking?

a. worn wheel cylinders
b. worn caliper pistons
c. seized caliper slides
d. missing clips

Ask for any Exams or Study materials from (arthurmurphy121@gmail.com)

,D : missing clips

why : missing anti-rattle clips could cause excessive noise while braking
A vehicle equipped with a "hill holding" option has an ABS code. Which tool
would most likely be used to check the wheel speed sensor?

a. AC volt meter
b. Ohm meter
c. Scan tool
d. Ammeter
C : scan tool

why : a scan tool or oscilloscope can be used to test a signal from a digital when
speed sensor
The brake system has a soft, sinking pedal with the engine running. The brake fluid
level is at the correct height. Which of the following could be the cause?

a. a restricted vacuum hose
b. a leaking master cylinder
c. a bypassing master cylinder
d. a stuck open vacuum check valve
C : a bypassing master cylinder

why : a bypassing master cylinder would cause a low pedal and would not cause a
loss of fluid
Technician A says the pins should be driven in with a brass hammer. Technician B
says the pins should be lubricated with brake fluid. Who is correct? ( pg. 47 )

a. A
b. B
c. A & B
d. neither A OR B
D : neither A OR B


Ask for any Exams or Study materials from (arthurmurphy121@gmail.com)

,why : neither technician is correct. this style of pin should be installed with a
torx or hex head socket
Technician A says a hydro-boost system can use the power steering pump
to operate the booster. Technician B says a hydro-boost system can use
engine vacuum to operate the booster. Who is correct? ( pg. 47 )

a. A
b. B
c. A & B
d. neither A & B
A : only A

why : only tech A is correct. a hydro-boost system uses hydraulic pressure to create
boost
A disc brake caliper is dragging. All of the following could be the cause EXCEPT

a. binding pins
b. sticking piston
c. binding caliper
d. worn brake pads
D : worn brake pads

why : worn brake pads will not cause the brakes to drag
Which operation is being performed in the illustration? ( pg. 48 )

a. wheel cylinder bleeding
b. brake caliper bleeding
c. master cylinder bleeding
d. master cylinder pressure test
C : master cylinder bleeding

why : the master cylinder is being bleed prior to installation
The rear wheels of a front wheel drive car lockup during heavy breaking.
Technician A says this could be cause by faulty proportioning valve. Technician B

Ask for any Exams or Study materials from (arthurmurphy121@gmail.com)

, says this could be caused by a faulty brake booster. Who is correct?

a. A only
b. B only
c. Both A & B
d. Neither A or B
A : A only

why : tech A is correct. a faulty proportioning valve could cause the pressure to the
rear wheels to be too high and lock the wheels during hard braking
There is a loud growling noise only when the vehicle is steered to the right while
driving. Which of the following could be the cause?

a. work left front brakes
b. worn wheel bearing
c. worn right front brakes
d. sticking brake caliper
B : worn wheel bearing

why : this is a typical wheel bearing noise
A spongy pedal can be the result of:

a. leaking wheel cylinders
b. broken return springs
c. contaminated linings
d. seized wheel cylinder
pistons A : leaking wheel
cylinders

why : a spongy pedal can result from air in the hydraulic system. leaking wheel
cylinders could allow air to get into the hydraulic system and result in a
spongy pedal
A vehicle has a wheel speed sensor diagnostic trouble code. Which of
the following is the LEAST LIKELY cause?

Ask for any Exams or Study materials from (arthurmurphy121@gmail.com)

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Abdinurse. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $15.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

67866 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$15.99
  • (0)
  Add to cart