100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
OSHA 10 Hour $24.49   Add to cart

Exam (elaborations)

OSHA 10 Hour

 0 view  0 purchase
  • Course
  • OSHA 10 Hour\\
  • Institution
  • OSHA 10 Hour\\

OSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 HourOSHA 10 Hour

Preview 4 out of 37  pages

  • September 26, 2024
  • 37
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • OSHA 10 Hour
  • OSHA 10 Hour
avatar-seller
mikedoc
OSHA 10 Hour
_____ liquids are those that have a flashpoint at or above 100 degrees Fahrenheit. -
ANSWER✅✅✅Combustible

Any liquids that have a flashpoint at or above 100 degrees Fahrenheit are considered combustible
liquids.



A boom angle indicator, clearly visible to the operator, is required on all of the following equipment
EXCEPT: - ANSWER✅✅✅Cranes with fixed-length and angle booms

Cranes and derricks that have variable angle booms, and cranes with telescoping booms, should be
equipped with a boom angle indicator that is clearly visible to the operator.



A catwalk built over the lower run of a horizontal belt may be guarded on both sides by any of these
guards EXCEPT: - ANSWER✅✅✅Horizontal railings filled with Perforated sheet metal

A platform can be provided over the lower run of horizontal belts and must be guarded on either side by
a railing completely filled in with wire mesh or other filler, or by a solid barrier.



A chemical that will ignite spontaneously in air at a temperature of 130 degree Fahrenheit (54.4 degree
Celsius) or below is identified by the term _____. - ANSWER✅✅✅Pyrophoric

Pyrophoric means a chemical that will ignite spontaneously in air at a temperature of 130 degree
Fahrenheit (54.4 degree Celsius) or below.



A crane's main frame, crawler track and/or outrigger supports, boom sections, and attachments are all
considered part of the _____ of lifting. - ANSWER✅✅✅structural integrity

The structural integrity of lifting for a crane include: the main frame, crawler track and/or outrigger
supports, boom sections, and attachments.



A crane's mobility and safety during lifting operations are governed by the interplay of all these
principles EXCEPT: - ANSWER✅✅✅Operator skill

The four basic lifting principles that govern a crane's mobility and safety during lifting operations are the
center of gravity, leverage, structural integrity and stability.



A multi-point adjustable scaffold must be supported by _____ ropes. - ANSWER✅✅✅More than two




OSHA 10 Hour

,OSHA 10 Hour
Multi-point adjustable scaffolds must be supported by more than two ropes. Normally, four ropes are
used, one secured at each corner of the platform.



A personal protective equipment program includes all these PPE procedures EXCEPT: -
ANSWER✅✅✅repairing

A personal protective equipment program includes the procedure for assessing the workplace for
hazards, identification of needed PPE, the procedure for selecting PPE, the procedure for providing PPE,
and the procedure for using PPE.



A pump jack scaffold must be fitted with two ______ gripping mechanisms to prevent slippage. -
ANSWER✅✅✅Positive

According to OSHA Standards, a pump jack scaffold must be fitted with two positive gripping
mechanisms to prevent slippage.



A worker comes in contact with live electrical parts and is shocked but receives no major injuries. What
would be the MOST LIKELY reason he suffered no electricity-related injuries? - ANSWER✅✅✅He was
wearing nonconductive safety shoes

The worker did not suffer any major injuries because he was wearing nonconductive safety shoes.



A worker on a jobsite is told by a supervisor to back a loaded truck into position for unloading, but the
rear view is obstructed by the load. What is the worker's safest course of action? -
ANSWER✅✅✅Ask coworkers to be flaggers

Improper operation of heavy vehicles poses a life-threatening danger to construction workers. Always
station flaggers behind vehicles that have obstructed rear views.



A worker should always position a ladder at an angle where the horizontal distance from the top
support to the foot of the ladder is _____ the working length of the ladder. - ANSWER✅✅✅1/4

OSHA requires that workers should always position a ladder at an angle where the horizontal distance
from the top support to the foot of the ladder is 1/4 the working length of the ladder.



A worker who is not using fall arrest protection loses his footing at the top of a six-story building, calls
for help, and then falls. If his coworkers on the ground hear his cry, how much time do they have to take
measures to break his fall? - ANSWER✅✅✅2 seconds


OSHA 10 Hour

,OSHA 10 Hour
It only takes 2 seconds for a worker to reach the ground from a height of six stories. Always use fall
protection when working in elevated places.



According to OSHA records for the period 1995 to 1999, per yearly average, 362 construction workers
died on the jobsite due to injuries received due to _____ hazards. - ANSWER✅✅✅fall

According to OSHA records, 362 construction workers died on the jobsite every year from 1995 to 1999
due to injuries received as a result of fall hazards.



According to OSHA statistics, in 75% of struck-by fatalities, the victims were hit by: -
ANSWER✅✅✅Heavy Equipment

OSHA estimates that 75 percent of struck-by fatalities involve heavy equipment like trucks or cranes.



According to OSHA, most crane-related accidents (nearly 45 percent) are caused by: -
ANSWER✅✅✅Boom or crane contact with energized power lines

OSHA has identified that boom or crane contact with energized power lines causes nearly 45 percent of
all crane accidents.



According to OSHA, nearly 45 percent of crane-related accidents are caused by: -
ANSWER✅✅✅Contact with energized power lines



According to statistics, what is the most common electricity-related direct injury? -
ANSWER✅✅✅Burns

The most common electricity-related injury is a burn. They occur when a person touches electrical
wiring or equipment that is improperly used or maintained.



According to the Hazard Communication Standard, all these objects are recognized containers for
hazardous materials EXCEPT: - ANSWER✅✅✅A pipe

A container may be any bag, barrel, bottle, box, can, cylinder, drum, reaction vessel, storage tank, or the
like that contains a hazardous chemical. For the purposes of the HCS, pipes or piping systems, engines,
fuel tanks, or other operating systems in a vehicle are not considered to be containers.




OSHA 10 Hour

, OSHA 10 Hour
After a fall, a suspended worker must keep his arms and legs moving to keep circulation going and avoid
Orthostatic Intolerance. - ANSWER✅✅✅True



All of the following are essential points for the safe use of cords and wiring EXCEPT: -
ANSWER✅✅✅Use only two-wired type cords

Two-wire type cords do not effectively protect in the event of a short circuit. Always use three wire
cords equipped with a path to ground to prevent a severe electrical shock.



All of the following are sources of potential injuries EXCEPT: - ANSWER✅✅✅Objects that fall from
above

Sources of potential injuries include objects that might fall from above, exposed pipes or beams at work
level, exposed liquid chemicals, sources of heat, intense light, noise, or dust, and equipment or materials
that could produce flying particles.



All of the following effects are acute EXCEPT: - ANSWER✅✅✅Dermatitis

Acute effects indicate the symptoms have occurred rapidly. The effects are of short duration and a
result of short-term exposures. Some examples of acute effects are burns, lacerations, and puncture
wounds.



All these items are included in a regular crane inspection EXCEPT: - ANSWER✅✅✅Boom Angle

The following must be inspected on a regular basis: air pressure, tire inflation, clearance for rotating
superstructure, wire rope wear, physical damage to the crane, loose or missing hardware or fasteners,
and fluid leaks.



All these shafts must be securely held in position against endwise thrust EXCEPT: -
ANSWER✅✅✅Horizontal

Each continuous line of shafting must be secured in position against excessive endwise movement.
Inclined and vertical shafts, particularly inclined idler shafts, have to be securely held in position against
endwise.



Although all elements comprising a hazard warning label are important, the LEAST important element is
the label's _____. - ANSWER✅✅✅Color



OSHA 10 Hour

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller mikedoc. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $24.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75619 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$24.49
  • (0)
  Add to cart