HIC Virginia Exam Tested Questions With Revised Correct Detailed Answers |ALREADY GRADED A+ PASS 2024 >> BRAND NEW VERSION!!
3 views 0 purchase
Course
Virginia hic
Institution
Virginia Hic
HIC Virginia Exam Tested
Questions With Revised Correct
Detailed Answers |ALREADY
GRADED A+ PASS 2024 >> BRAND
NEW VERSION!!
1) Two or more layers of felt cemented together and surfaced with a
cap sheet, mineral aggregate, smooth coating or similar surfacing
material is: -...
HIC Virginia Exam Tested
Questions With Revised Correct
Detailed Answers |ALREADY
GRADED A+ PASS 2024 >> BRAND
NEW VERSION!!
1) Two or more layers of felt cemented together and surfaced with a
cap sheet, mineral aggregate, smooth coating or similar surfacing
material is: - ANSWER Built-up roof covering
2) Asphalt shingles shall only be used on roof slopes of units vertical in
12 units horizontal or greater. - ANSWER 2
3) If the length of a piece of gutter is 22 ft 6 inches, what is the max
slope that can be provided? - ANSWER 1-3/8", Metal gutters on a
house appear to be level. However, they actually slope at least 1" every
16' toward the downspouts (1/16 per foot). 22'-6" - 16'-0" = 1 inch 22'-
6" - 16' = 6' 6 6'-6" x 1/16 = 6/16 = 3/8" Total Max Pitch = 1-3/8"
4) What is the emittance value of steel? - ANSWER 0.12
,5) Which would not be considered an overlooked location to install
insulation? - ANSWER Open attic space.
6) This type of insulation installation adheres the flange outside edge to
the face of the framing. - ANSWER Inset stapling.
7) A ______ wall is a masonry outer non-weight bearing wall that is not
braced at each story. - ANSWER Curtain
8) When installing fascia, measure the cover required, cut the fascia
the proper width, and punch snaplock "ears" every _______along the
top of the fascia using a snaplock punch. - ANSWER
9) Garage floor surfaces must be made of approved - ANSWER
noncombustible
10) Which type of joint is made in concrete to cause cracking in
preselected locations? - ANSWER Contraction
11) What is the minimum length between lap splices on reinforcing
steel? - ANSWER The lap can be designated in either inches or bar
diameters but should not be less than 12 in
, 12) When repointing mortar, the depth of the mortar removed should
be equal to or exceed times the thickness of the original joint. -
ANSWER 2
13) What is the minimum wall thickness in inches for a plain masonry
foundation wall with a height of 6 feet with a unbalanced backfill height
of 5 feet constructed in sandy gravel soil? - ANSWER 6 solid or 8
14) Which type of primers are unique in providing galvanic protection
to steel? - ANSWER Zinc-rich coatings
15) The shortest screw that can be used to install a 5/8" gypsum panel
to wood studs is ___. - ANSWER 1-1/4" Type W bugle head
To place a resilient channel either a ___ or ___ screw can be used. -
ANSWER 1-1/4" Type W bugle head; 1-1/4" Type S bugle head
Gypsum products should be stored ___ in a shed or outbuilding. -
ANSWER Stacked flat
What is the maximum rafter span for #1 Spruce-Pine-Fir 2X12 spaced
16 inches o.c. with a ground snow load of 30 PSF and a dead load of 20
PSF with the ceiling not attached to the rafters? - ANSWER 19-2
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller EWLindy. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.
