NICET LEVEL1 WATER BASED SYSTEM EXAM 100% PASS QUESTIONS WITH DETAILED ANSWERS | A+ GRADE ASSURED // LATEST
6 views 0 purchase
Course
Nicet
Institution
Nicet
What is a purpose of a control valve - ANS Control Flow to water based fire protection system
The gauge on the quick opening device shall indicate _____ as compared to the gauge on the system side of the dry pipe valve? - ANS the same pressure
What type of test shall be provided when a va...
ck
100% PASS QUESTIONS
WITH DETAILED
lo
ANSWERS | A+ GRADE
yc
ASSURED // LATEST
ud
st
, What is a purpose of a control valve - ANS Control Flow to water based fire protection system
The gauge on the quick opening device shall indicate _____ as compared to the gauge on the
system side of the dry pipe valve? - ANS the same pressure
What type of test shall be provided when a valve is returned to service to determine that the
valve is open? - ANS Valve status test
What is a fire service main? - ANS A pipe and its appurtenances on private property/ Pipe
between a source of water and the base of the system riser
ck
Name the system that utilizes a plate through which a passes a specific amount of foam
concentrate at a specific pressure. - ANS Orifice Plate Proportioning
During an inspection, which of the following would be identified as a sprinkler which shall be
replaced? - ANS Corrosion
lo
What are the inspection requirements for hangers and seismic braces installed in concealed
spaces? - ANS Periodic inspection is not required
Gauges shall be replaced every _____ or tested every _____ by comparison with a calibrated
yc
gauge - ANS 5 years/ 5 years
Where air pressure supervision is connected to a constantly attended location gauges shall be
inspected ______? - ANS Monthly
ud
Sprinklers installed in areas that are inaccessible for safety consideration, due to process
operations ____ be ____ during each scheduled shutdown? - ANS Shall/ Inspected
What type of valve is designed for the purpose of reducing downstream water pressure under
both residual and static conditions - ANS Pressure reducing valve
st
PIV and OS&Y shall be backed a __________ from the fully open position to prevent jamming. -
ANS 1/4 turn
Gauges not accurate to within _______ percentage of the full scale shall be recalibrated or
replaced? - ANS 3 percent
When there is a _________ reduction in full flow pressure, when compared to original
acceptance test, the cause of the reduction shall be identified and corrected. - ANS 10 Percent
An informational sign shall be placed at the _______ supplying the antifreeze loop, dry system,
pre action system, or auxiliary systems control valve. - ANS System Control Riser
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Studyclock. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.