Exam (elaborations)
Masonry 2 Exam Questions and Answers 2024
- Course
- Institution
Masonry 2 Exam Questions and Answers 2024
[Show more]
Content preview
Masonry 2 Exam Questions andAnswers 2024
A chimney will not draw properly in the_____is too small - ANSWER-Flue
A fireplace should have a foundation that is_____the foundation of the structure -
ANSWER-Independent of
A footing designed to run completely around the perimeter of a structure is called a___ -
ANSWER-Continuous footing
A footing that bears the load of a free standing column is an___ - ANSWER-Isolated
footing
A foundation made with reinforced walls and floor cast as a single unit is known as a___
- ANSWER-Raft foundation
A good rule of thumb for a standard brick wall is one bag of masonry cement for
every___ - ANSWER-125 to 150 bricks
A grouted, reinforced horizontal or vertical collection of masonry units is known as a___
- ANSWER-Bond beam.
A lintel that can be built in place is a___ - ANSWER-Continuous lintel.
A list of all the symbols used on a drawing set is usually contained in the___ -
ANSWER-Legend
A mason can check that there is no mortar protruding inside a cavity that is to be
grouted by looking in the___ - ANSWER-Cleanout openings
A mechanical vibrator should be used to consolidate a lift over___ - ANSWER-12
inches
A patio will only be as stable as the_____underneath it. - ANSWER-Subgrade
A single layer of brick pavers can be supported by a______inch thick stepped bar
reinforced with wire mesh. - ANSWER-Four
A single wythe block wall to be grouted should be built to a height of no more than___ -
ANSWER-5 feet
A steel lintel should be set back from the face of the wall to allow room for___ -
ANSWER-A mortar joint.
, A support over a doorway is known as a___ - ANSWER-Lintel
A two story house will have_____floor plans on the working drawing - ANSWER-Two
After it is poured, grout is vibrated or rodded to___ - ANSWER-Be sure no voids remain.
After they are laid, concrete pavers should be tapped into place with a___ - ANSWER-
Rubber mallet
Architectural drawings that are used on the job site ate often called - ANSWER-Prints
Architectural terms___ - ANSWER-Identify specific objects and materials
Before pouring a cavity wall, the mortar should harden for___ - ANSWER-3 days.
Bolt cutters can be used to cut rebar up to size___ - ANSWER-4.
Bricks for sills are usually laid___ - ANSWER-Rowlock style
Changes in the drawing set that are made after the contract has been signed are
called___ - ANSWER-Revisions
Continuous horizontal joint reinforcement is made of_____ steel to prevent corrosion. -
ANSWER-Galvanized
Continuous horizontal tie should overlap by at least_____to provide good load transfer.
- ANSWER-6 inches
Excess mortar in a cavity wall will___ - ANSWER-Keep grout from properly bonding.
Exterior brick paving must have good_____drainage to prevent efflorescence, stains
and mold. - ANSWER-Drainage
Fine grout is typically used to fill cavities that are smaller than___ - ANSWER-2 inches
For brick masonry, a lintel must extend a minimum of___ - ANSWER-4 inches on each
side.
For flights of step less than_____inches high, make each riser 7 1/2 inches or less -
ANSWER-30
For patios and sidewalks, _____is used to prevent horizontal movement of mortarless
pavers - ANSWER-A retaining edge
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller CLOUND. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75323 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now