100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ASE MLR Certification Test(Latest Exam 2024) $15.49   Add to cart

Exam (elaborations)

ASE MLR Certification Test(Latest Exam 2024)

 0 view  0 purchase
  • Course
  • ASE MLR Certification Tes
  • Institution
  • ASE MLR Certification Tes

ASE MLR Certification Test(Latest Exam 2024)

Preview 2 out of 10  pages

  • October 6, 2024
  • 10
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • ASE MLR Certification Tes
  • ASE MLR Certification Tes
avatar-seller
Travelnurse691
ASE MLR Certification Test(Latest Exam
2024)
Both A and B - correct answers✅Technician observes that the brake fluid level is
at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads
could be the cause. Tech B says that a leak in the brake hydraulic system could be
the cause. Who is right?


A only - correct answers✅The tires of a vehicle are being rotated and balanced.
Tech A says that the wheel weight retaining clips must be matched to the rim
profile. Tech B says that directional tires are rotated in a criss-cross pattern. Who is
right?


Safely exit the building - correct answers✅When a shop fire cannot be
immediately contained, the best thing to do is warn others in the area, and:


300 amps for 15 seconds - correct answers✅A fully charged battery rated at 600
CCA, the ambient temperature is 70 degrees which of these current and time
periods should be used?


B only - correct answers✅A vehicle's halogen headlamp bulbs are being replaced.
Technician A says the glass part of the bulb can only be handled with bare hands.
Technician B says the headlamp may need to be removed. Who is right?


0.728 - correct answers✅On a Metric Micrometer upper sleeve reading 5.0mm
with lower sleeve reading 0.50mm and a thimble reading of 0.01mm what is the
overall reading?


A only - correct answers✅The fuel filter on a fuel-injected vehicle is being
replaced. Tech A says the fuel pressure should be relieved before removing the filter.
Tech B says that the arrow on the fuel filter should point towards the fuel tank. Who
is right?


The brake pedal feels low and spongy - correct answers✅Which of these is an
indication of air in the brake hydraulic system?


Anaerobic - correct answers✅Which of these cures in the absence of air?

, ASE MLR Certification Test(Latest Exam
2024)

Fluid contaminated brake linings - correct answers✅A grabbing brake condition
can be caused by any of these EXCEPT:


Visually verify that the oil filter gasket is properly installed - correct
answers✅When performing an oil filter change on a vehicle with a spin on oil filter,
the technician must:


Voltage regulation - correct answers✅A vehicle's battery prematurely fails. A
charging system output test shows the generator (alternator) is producing a
constant 16.0 volts. This could indicate a failed:


Seal should be lubricated with transmission fluid - correct answers✅A
transmission equipped with a filter is being serviced. When installing the new filter,
the:


Both A and B - correct answers✅While inspecting the rear axle wheel studs on a
rear-wheel drive vehicle, the technician observed that one stud is damaged.
Technician A says that all the wheel studs on the hub assembly should be replaced.
Technician B says that the thread pitch and diameter of the replacement stud must
be the same as the original. Who is right?


Neither A nor B - correct answers✅The three C's (concern, cause, and correction)
are being reviewed on the repair order. Technician A says that the customer's
statement that the steering wheel shakes is the "correction". Technician B says that
a customer's statement about a puddle on the floor of the customer's garage is the
"cause".


Pump the brake pedal until firm - correct answers✅A technician installs new
brake pads on the front of a vehicle. Before the vehicle is removed from the lift the
technician should:


Determine rotor minimum "machine to" thickness - correct answers✅When
measuring parallelism of a disc brake rotor, a technician measures 0.002" variation
beyond specifications. The next step is to:

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Travelnurse691. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $15.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

77333 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$15.49
  • (0)
  Add to cart