100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Electrical Theory exam fully solved & updated $10.49   Add to cart

Exam (elaborations)

Electrical Theory exam fully solved & updated

 1 view  0 purchase
  • Course
  • EWRB
  • Institution
  • EWRB

Electrical Theory exam fully solved & updated

Preview 2 out of 12  pages

  • October 6, 2024
  • 12
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • EWRB
  • EWRB
avatar-seller
tuition
Electrical Theory exam fully solved &
updated




State the permissible test result for an insulation resistance test for the electrical
installation with ALL the permanently-connected electrical equipment
DISCONNECTED - ANSWER-1 Mega Ohm

State the permissible test result for an insulation resistance test for the electrical
installation with ALL the permanently-connected electrical equipment
CONNECTED - ANSWER-0.01 Mega Ohms

A three-phase induction motor normally runs on full-load. State ONE reason why
this motor should not be run LIGHTLY LOADED when it runs on full load. -
ANSWER-- The power factor of the motor will be poor
- The motor will be less efficient
- running costs rise

A three-phase induction motor has been OPERATING NORMALLY ON FULL-
LOAD. The motor starts to over-heat even though it is drawing the normal full
load current.

State ONE reason why this situation would occur - ANSWER-- The motor
ventilation is restricted in some manner
- The cooling fan has become detached from the motor shaft

A clip-on ammeter is being used to test the integrity of the insulation of a repaired
Class I electrical appliance, while the appliance is live. Where on the appliance
would the clip-on ammeter be used? Also state the maximum test result that
would allow the appliance to return to service. - ANSWER-Clamped around the
protective earthing conductor and 5mA

, Explain what is meant by the term INVERSE TIME-CURRENT CHARACTERISTIC
in relation to protective devices - ANSWER-as current through the protective
device increases, the time taken to operate decreases

State TWO components that are typically used to smooth the d.c output of a
rectifier - ANSWER-- Capacitors
- Inductors
- Resistors

The output circuit of an autotransformer MUST BE insulated for the highest input
or output voltage of the autotransformer. State ONE reason for this requirement -
ANSWER-An auto transformer can fail in such a way so the primary voltage
appears across the secondary

An isolator for 230V electrical equipment has been replaced. During the work the
phase (active) and neutral were accidentally transposed at the supply side of the
isolating switch.
What potential danger would this transposition create? - ANSWER-The internal
circuitry of the electrical equipment would be live when the isolating switch is in
the OFF position.

What to the initials BJT mean when applied to semiconductors - ANSWER-A bi-
polar junction transistor

State the function of a transducer - ANSWER-A device that changes energy from
one form to another

State TWO requirements for good illumination - ANSWER-Any TWO of:

● Provides clear vision without eye strain

● Sufficient light intensity

● Minimum glare

● Uniform light intensity throughout the illuminated area

● Suitable colour rendering

XC - ANSWER-Capacitive Reactance (ohms)

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller tuition. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $10.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

84669 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$10.49
  • (0)
  Add to cart