MECP Masters Test Study Guide Questions & Answers 2024/2025
0 view 0 purchase
Course
MECP Masters
Institution
MECP Masters
MECP Masters Test Study Guide Questions & Answers 2024/2025
Cars in 1982 - ANSWERSAbout 500 wires
Cars in 1992 - ANSWERSAbout 2000 wires
Appropriate substitute for a relay in a low current DC switching application. - ANSWERSNPN Transistor
Time constant formula for capacitors. - ANSWER...
MECP Masters Test Study Guide
Questions & Answers 2024/2025
Cars in 1982 - ANSWERSAbout 500 wires
Cars in 1992 - ANSWERSAbout 2000 wires
Appropriate substitute for a relay in a low current DC switching application. - ANSWERSNPN Transistor
Time constant formula for capacitors. - ANSWERS1 TC = R x C (Resistance x Capacitance)
Can be placed on a relay to protect transistorized outputs on an ECU. - ANSWERSSilicon Diode (place in
parallel across the coil terminals)
In a NPN transistor, the direction of the arrow indicates. - ANSWERSThe N material
On the OBD-II diagnostic connector the supply B+ and ground are. - ANSWERSPin 4 is chassis ground and
pin 16 is B+
Character that represents an OBD-II network diagnostic trouble code. - ANSWERSU
MOSFETS - ANSWERSmetal oxide semiconductor field effect transistor
JFET - ANSWERSjunction field effect transistor
Logic gates - ANSWERSsemiconductor that allow the smallest of currents(voltages) to control much
larger voltages or currents
, The "AND" Gate - ANSWERSboth inputs much be True
The "OR" Gate - ANSWERSany one of the inputs can be True
The "NOT" Gate - ANSWERSsimply inverts the input
Over what conductor configuration is MOST 50 ePHY transmitted? - ANSWERSA Dual UTP of four wires
In an OBD-II complaint DTC what does the first character "U" represent? - ANSWERSA network related
code
OBD-II DTCs that do not trigger immediate MIL activation and deley as many as three drive cycles before
triggering an MIL are called soft codes. - ANSWERSFalse
In which pin locations of an SAE J1962 OBD-II connector are the HS CAN High and HS CAN Low diagnostic
bus wires found? - ANSWERSPins 6 and 14
What is the output result of the AND logic gate if input A equals 0 and input B equals 1 ? - ANSWERS0
MECP recommended practice of safely testing voltage using the one-handed rule is for circuit voltages
exceeding 50 volts. - ANSWERSTrue
What is the operating voltage of a LIN bus network? - ANSWERS12 volts
What is the recommended shielding gas used in wire-feed MIG welding when welding mild steel? -
ANSWERSC25
If using a table-mounted router with a 3/4'' bearing on a 1/2'' flush trim router bit to copy a template
shape what amount of oversize on the copied work piece will result from copying the original template
shape? - ANSWERS1/8''
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Bensuda. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.49. You're not tied to anything after your purchase.
