Exam (elaborations)
API 570 - Open Book - Practice Exam 2023 QUESTIONS WITH 100- CORRECT ANSWERS.
- Course
- Institution
API 570 - Open Book - Practice Exam 2023 QUESTIONS WITH 100- CORRECT ANSWERS.
[Show more]
Seller
Follow
Content preview
10/8/24, 6:02 AMScheduled maintenance: October 9, 2024 from 01:45 AM to 03:45 AM
API 570 - Open Book - Practice Exam 2023
33
JEREMIAH
Terms in this set (90)
A Hydrotest is conducted on an 190 Psig.
underground line as a substitute for the
external inspection. The test pressure is 200
Psig. At the end of the test, the pressure
must be at least - API 570 9.8.6
Determine the maximum allowed pressure 375 Psig.
for a Class 300 flange that has a design
temperature of 950 °F. The flange material
is ASTM A217 Gr. C12 - B16.5 Table 1.1-1
An 8 NPS pipe is being replaced with A106 0.392"
gr. B material. The pipe retirement thickness
(Tmin) is 0.218" and the corrosion allowance
is 0.125". what is the minimum thickness of
pipe that could be ordered after adjusting
for mill-tolerance? - API 574: 4.1.1
A welder is being qualified by RT on a 0.200"
0.600" plate using the SMAW process. What
is the maximum allowed length of an
individual elongated slag inclusion for this
qualifying test? - ASME Sect. IX - QW-
191.1.2.2(a)(2)(b)
Protection in a boiler from Boiler Feed Maintaining a protective corrosion layer of magnetite (Fe3O4).
Water Corrosion is accomplished by: - API
571: 3.9.3.b
A liquid penetrant procedure must be On Materials below 40 °F
qualified when performing the examination:
- ASME Sect. V - T-653
1/11
, 10/8/24, 6:02 AM
When qualifying a SMAW weld procedure, A-1 or A-2
if the "A-Number" on the PQR is an A-2,
what "A-Number" must be on the WPS? -
ASME Sect. IX - Table QW-253 & QW-404.5
When welding pipe, peening is prohibited The Root and Final Passes
on: ASME B31.3: - 328.5.1(d)
What is the diameter of the bolts that are 1.00 Inch
used for a 6 NPS class 600 Flange - ASME
B16.5: - Table 15C
During the evaluation of a radiograph, the 2.55
density at the IQI is 3.0. What is the
minimum density allowed on this
radiograph in the weld? - ASME Sect V: T-
282.2(a)(1)
Which materials are generally Not Copper, Nickel, Stainless Alloys
susceptible to Acidic Sour Water
Corrosion? This may have more than one
correct answer. Please select all answers
that apply - API 571: 3.58.2.a&b
For Class 2 piping, a petrochemical plant 33% of the non-damaged areas.
should consider performing CUI
inspections at: API 570: Table 2 (pg. 48)
The set pressure for a relief device In accordance with the rules of ASME B&PV Section VIII.
protecting piping systems shall be set:
ASME B31.3 - 322.6.3(b)
When performing a WFMPT (Wet 5 Minutes
Fluorescent Magnetic Particle Testing)
examination, prior to the examination, the
examiner shall be in a darkened area for.
ASME Sect V. - T-777.2(b)
What is the maximum allowed hydrotest 1100 Psig.
pressure for piping with class 300 flanges
that are made of ASTM 182 Gr. F316
Material? The Design Temperature is 600 °F
- ASME B16.5: 2.6, Tables 1.1-1 & 2-2.2c
What is the required preheat temperature 50 °F
for an A106 Gr. B pipe with carbon content
less than 0.2% and has a wall thickness of
0.500"? - ASME B31.3: Table 330.1.1
Atmospheric corrosion becomes less of an 250 °F
issue at temperatures above: - API 571 -
3.8.3.f
Which of the following is an essential Deletion of backing
variable when qualifying a welder using the
SMAW process? - ASME Sect. IX - Table
QW-416 or Table QW-353
Which document provides information on API 584
Integrity Operating windows? - API 570: 2
2/11
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Denyss. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79373 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now