100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
CWB 2 All Modules Exam 2025 Version Best Studying Material with All Questions from Actual Exam and Correct Answer $15.49   Add to cart

Exam (elaborations)

CWB 2 All Modules Exam 2025 Version Best Studying Material with All Questions from Actual Exam and Correct Answer

 5 views  0 purchase
  • Course
  • CWB 2
  • Institution
  • CWB 2

CWB 2 All Modules Exam 2025 Version Best Studying Material with All Questions from Actual Exam and Correct Answer

Preview 4 out of 46  pages

  • October 11, 2024
  • 46
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • CWB 2
  • CWB 2
avatar-seller
Essiekarimi
CWB 2 All Modules Exam 2025 Version Best Studying
Material with All Questions from Actual Exam and
Correct Answer

What is the term used to describe the following condition of lost corrosion
resistance?

"When certain stainless steels are heated between 500-850° C, carbides form at
the grain boundaries and cause a local depletion of chromium."

(A) Oxidization
(B) Increased toughness
(C) Solution heat treatment
(D) Sensitization
- ans -(D) Sensitization

Note: Also known as "carbide precipitation" -- Chromium binds to carbides, and
"sweats out" at the grain boundaries

On a radiograph, undercut appears as a _________ line.

(A) light
(B) dark
- ans -(B) dark

What are the 5 basic joints?
- ans -1) Butt
2) Corner
3) T
4) Lap
5) Edge

What are the 5 basic weld types?
- ans -1) Groove
2) Fillet
3) Plug/Slot

,4) Surfacing
5) Edge


When using a non-consumable electrode in DCEN, the majority of the heat is
concentrated on the __________.

(A) Electrode
(B) Workpiece - ans -(B) Workpiece

Which has a "drooping" curve characteristic - CC or CV? - ans -CC

AC transformer welding power sources use a:

(A) step-up transformer
(B) step-down transformer
- ans -(B) Step-down transformer

What is a diode used for in a welding machine?

(A) To produce AC current
(B) To produce DC current
- ans -(B) To produce DC current

The typical duty cycle for a Class 1 industrial welding power source is:

(A) 20%
(B) 35%
(C) 60%
(D) 150% - ans -(C) 60%

What current/polarity is used when welding aluminum with GTAW?

(A) DCEN
(B) DCEP
(C) AC - ans -(C) AC

,True or False: a welding cable size designation "No. 4" is larger than a "No. 2". -
ans -False.

Cable sizes (smallest-to-largest) are:
4 - 3 - 2 - 1 - 1/0 - 2/0 - 3/0 - 4/0

To increase the melting rate (burn-off rate) of a SMAW electrode, which polarity
would you use? - ans -DCEN

Is it possible to operate a wire-feed welding process using constant current? - ans
-Yes - but you must use a voltage-sensing wire-feeder to obtain a self-regulating
arc.

A transformer is a device that:

(A) transforms AC to DC
(B) transforms DC to AC
(C) changes the value of AC - ans -(C) changes the value of AC

A rectifier is a device that:

(A) transforms AC to DC
(B) transforms DC to AC
(C) changes the value of AC - ans -(A) transforms AC to DC

I = V/R and V = IR
are examples of what law? - ans -Ohm's Law

In Ohm's Law (I = V/R), what do each of the letters mean?
- ans -I = Current (in amps)
R = Resistance (in ohms)
V = Voltage (in volts)

What benefit to the weld deposit does cellulose provide in a SMAW electrode
coating? - ans -Improves ductility

The impact toughness of the weld deposit for the

, B-G 49A 3C G6 (ER49S-6) electrode is:

(A) not specified
(B) 27 J at 0 degrees Celsius
(C) 27 J at -30 degrees Celsius
(D) 27 J at -6 degrees Celsius
- ans -(C) 27 J at -30° Celsius

The result of increased nitrogen content in the final weld deposit will be:

(A) cracking
(B) undercut
(C) poor bead appearance
(D) porosity
- ans -(D) porosity

The following electrode is NOT gas-shielded:

(A) E491T-1
(B) E492C-3
(C) E492T-3
(D) E492T-5
- ans -(C) E492T-3

According to AWS, a brown tungsten electrode will be composed of tungsten and
which alloying ingredient?

(A) zirconium oxide
(B) thorium oxide
(C) cerium oxide
- ans -(A) zirconium oxide

The tensile value of an electrode designation is typically designated by CSA in
____.

(A) kPa
(B) MPa

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Essiekarimi. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $15.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75057 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$15.49
  • (0)
  Add to cart