100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
Previously searched by you
MASSACHUSETTS (MA STATE) OIL BURNER TECHNICIAN LICENSE EXAM AND STUDY GUIDE 2024/2025 NEWEST!! COMPLETE ACTUAL 432 EXAM QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS) ALREADY GRADED A+.$25.49
Add to cart
MASSACHUSETTS (MA STATE) OIL BURNER TECHNICIAN LICENSE EXAM AND STUDY GUIDE 2024/2025 NEWEST!! COMPLETE ACTUAL 432 EXAM QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS) ALREADY GRADED A+.
2 views 0 purchase
Course
MASSACHUSETTS OIL BURNER TECHNICIAN
Institution
MASSACHUSETTS OIL BURNER TECHNICIAN
MASSACHUSETTS (MA STATE) OIL BURNER TECHNICIAN
LICENSE EXAM AND STUDY GUIDE 2024/2025 NEWEST!! COMPLETE
ACTUAL 432 EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+.
MASSACHUSETTS (MA STATE) OIL BURNER TECHNICIAN
LICENSE EXAM AND STUDY GUIDE 2024/2025 NEWEST!! COMPL...
MASSACHUSETTS (MA STATE) OIL BURNER TECHNICIAN
LICENSE EXAM AND STUDY GUIDE 2024/2025 NEWEST!! COMPLETE
ACTUAL 432 EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+.
What does L1 mean in electrical wiring? - ANSWER-hot or line voltage
What does L2 mean in a 115 volt circuit? - ANSWER-neutral
How far must oil storage be from an electrical panel? - ANSWER-3 feet
What does the letter "N" mean? - ANSWER-Neutral
What color wire is used for L1? - ANSWER-Black
What color wire is used for L2? - ANSWER-White
What color wire is used for "N"? - ANSWER-White
What is the fuse size in an oil burner circuit? - ANSWER-15 amp
What size wire is used in an oil burner circuit? - ANSWER-14 gauge
What is a series circuit? - ANSWER-one path for electricity to follow
Define a parallel circuit? - ANSWER-more than one path for the
electricity to follow
,What is the limit device used in a steam system? - ANSWER-
Pressuretrol
Wire with green insulation is used for what? - ANSWER-grounding
A 15 amp electrical circuit cannot have a continuous load of more
than _______amps? - ANSWER-12 amps
What is a short circuit? - ANSWER-power back to source with no load
T/F Limit switches are wired using L2? - ANSWER-False
Can a thermal switch be wired on L2? - ANSWER-No
What is the purpose of a combustion chamber? - ANSWER-to hold
heat and improve combustion
What happens when an oil flame touches a cold surface? - ANSWER-
It causes impingement
What is draft? - ANSWER-air in motion
Why do we use a barometric damper? - ANSWER-to regulate the draft
and make it constant
,What is required on a unit with a power operated vent? - ANSWER-an
air proving switch
Air leaks in the combustion chamber will cause what? – ANSWER-
poor efficiency
What is the maximum safe CO reading indoors? - ANSWER-9 ppm
Sulfuric acid is created when the stack temp drops below
____________degrees F. - ANSWER-250 degrees
A burner connected to a chimney that has -.01 of draft when cold will
need to be fitted with a _________. - ANSWER-draft inducer
Will an increase in excess air lower or raise the stack temperature? -
ANSWER-raise it
Will an increase in excess air lower or raise the CO2 reading? -
ANSWER-lower it
What is a good CO2 reading in a boiler with a retention head burner? -
ANSWER-10-12% (11%)
A draft of -.03 to -.04"wc over the fire, and -.01 to -.02"wc at the breach
is considered good. - ANSWER-False: over the fire draft -.01"wc to -
.02"wc, at the breach -.04"wc
, Draft measurements are taken in... - ANSWER-inches of water column
What will happen if a power vent fails to start or shuts down during
operation? - ANSWER-Burner will lock out
What are the proper draft settings over the fire and at the breach
respectively? - ANSWER--.02 and -.04"wc
Per code, what three things are needed along with a power venter? -
ANSWER-proving switch, damper, post purge
How far off the ground should a power venter terminal be? (minimum
distance) - ANSWER-1 foot
How far horizontally from a door or window should a power venter
terminal be? (minimum distance) - ANSWER-4 feet
Name two types of natural draft. - ANSWER-thermal, currential
What determines the nozzle angle used? - ANSWER-burner air
pattern, chamber size and shape
What is the position of the blast tube in the chamber? - ANSWER-1/4"
behind chamber face
How must the blast tube be pitched? - ANSWER-down towards the
chamber
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller nyagajoseph539. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $25.49. You're not tied to anything after your purchase.