100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Oil Burner License Exam Questions and Answers (Already Graded A+) $16.99   Add to cart

Exam (elaborations)

Oil Burner License Exam Questions and Answers (Already Graded A+)

 8 views  0 purchase
  • Course
  • Oil Burner License
  • Institution
  • Oil Burner License

Oil Burner License Exam Questions and Answers (Already Graded A+)Oil Burner License Exam Questions and Answers (Already Graded A+)Oil Burner License Exam Questions and Answers (Already Graded A+)Oil Burner License Exam Questions and Answers (Already Graded A+) What is the first thing a tech should...

[Show more]

Preview 4 out of 43  pages

  • October 14, 2024
  • 43
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Oil Burner License
  • Oil Burner License
avatar-seller
NursingTutor1
Oil Burner License Exam

Questions and Answers (Already

Graded A+)


What is the first thing a tech should do when arriving at a no combustion

call? - ANSWER-Ask how many times the customer reset the unit.




What is the best long term solution for preventing a clogged nozzle? -

ANSWER--Remove any underground storage tanks.

-Install a quality oil filter.

-Cut the suction line 10" above the tank outlet to prevent sludge.




Hot water and steam valves are interchangeable. - ANSWER-False




When in the presence of a flame, a cad cell normally reads.. - ANSWER-300-

1000 ohms

,If a pump is used to bring oil to a level higher than the tank, an oil safety

valve is required. - ANSWER-True




On a call where a hydronic heat system is putting out too much heat on the

stack, the issue may be.. - ANSWER--Too much draft.

-Not enough combustion air in the equipment room.

-Air leakage into chamber.




A high CO2 reading is caused by.. - ANSWER-Incomplete combustion




An often overlooked cause of a high CO2 reading is.. - ANSWER-Not enough

combustion air in the equipment room.




When multiple pumps are wired together in a heating system, they should be

wired in.. - ANSWER-parallel




In a series circuit.. - ANSWER-Current has one path.




When 2 burners are connected to the same chimney.. - ANSWER-Sufficient

draft must be obtained to operate both units.

,The ignition transformer is located.. - ANSWER-In the primary control.




Fuel units are generally set at the factory at: - ANSWER-100 psi




The oil burner nozzle in a high pressure burner performs the following

functions: - ANSWER--Atomizes the oil

-Provides a pattern of oil spray

-Delivers a fixed amount of oil




The nozzle flow rate, spray angle and pattern are directly related to: -

ANSWER--Tangential slots

-Swirl chamber

-Orifice




Cold oil or high viscosity problems may be eliminated by: - ANSWER--

Increasing the pump pressure and reducing the nozzle size

-Installing a nozzle line pre-heater

, When safeties are wired in series one safety will affect the operation of the

others. - ANSWER-True




A stack switch is no longer allowed to be installed or replaced because.. -

ANSWER-It's safety cutout time is higher than what is now required.




What is a power venter and what does it do? - ANSWER-An electrical device

that sends fluid gases into the chimney connector.




A burner in a confined space using 1 GPH of #2 fuel oil requires what size

permanent opening for combustion air? - ANSWER-140"




The difference between an adjustable flame retention burner and a fixed

flame retention burner is? - ANSWER-Air inlets can be adjusted




Ignitor position can be adjusted




Fuel can be adjusted

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller NursingTutor1. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $16.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79373 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$16.99
  • (0)
  Add to cart