Asphalt Field Level I Test with 100%
Verified solutions| Graded A+
This truck delivers mix directly into the hopper of the paver - ✔✔End dump truck
This truck employs a conveyor belt in the bottom of the truck bed to discharge asphalt mix -
✔✔Live bottom truck
This allows the paver to be operated almost continuously when a continuous supply of mix is available
from the asphalt plant - ✔✔MTV
This eliminates the problem of haul trucks bumping into the paver and segregation - ✔✔MTV
What is the correct way to load a truck with asphalt? - ✔✔There is no one correct way
What cannot be done to asphalt so that it is warm upon arrival at the jobsite - ✔✔Overheat
, What should never be used as a dump truck release agent? - ✔✔Diesel
This is used to determine the amount of mix in the auger chamber - ✔✔Feed control sensor
As required in Virginia, what must be coated with a heavy tack coat for proper joint adhesion? -
✔✔Cold side
Pushing mix off of the old lane and onto the new mat directly over the joint is called - ✔✔Bump
When it comes to joint overlapping, mix should not be __________ across the new lane -
✔✔rebroadcast
This regulates the amount of mix that can be delivered to the augers - ✔✔Conveyor flow gates
The paver consists of what two primary parts? - ✔✔tractor, screed
What is the single most important factor that affects the ultimate performance of asphalt concrete
layers - ✔✔Compaction
A 1% increase in air voids equals ___% loss of pavement life - ✔✔
What is the minimum percent of air voids in the field? - ✔✔92.5%
Verified solutions| Graded A+
This truck delivers mix directly into the hopper of the paver - ✔✔End dump truck
This truck employs a conveyor belt in the bottom of the truck bed to discharge asphalt mix -
✔✔Live bottom truck
This allows the paver to be operated almost continuously when a continuous supply of mix is available
from the asphalt plant - ✔✔MTV
This eliminates the problem of haul trucks bumping into the paver and segregation - ✔✔MTV
What is the correct way to load a truck with asphalt? - ✔✔There is no one correct way
What cannot be done to asphalt so that it is warm upon arrival at the jobsite - ✔✔Overheat
, What should never be used as a dump truck release agent? - ✔✔Diesel
This is used to determine the amount of mix in the auger chamber - ✔✔Feed control sensor
As required in Virginia, what must be coated with a heavy tack coat for proper joint adhesion? -
✔✔Cold side
Pushing mix off of the old lane and onto the new mat directly over the joint is called - ✔✔Bump
When it comes to joint overlapping, mix should not be __________ across the new lane -
✔✔rebroadcast
This regulates the amount of mix that can be delivered to the augers - ✔✔Conveyor flow gates
The paver consists of what two primary parts? - ✔✔tractor, screed
What is the single most important factor that affects the ultimate performance of asphalt concrete
layers - ✔✔Compaction
A 1% increase in air voids equals ___% loss of pavement life - ✔✔
What is the minimum percent of air voids in the field? - ✔✔92.5%
