Exam (elaborations)
ATMAE Study Guide Latest 2024 Quizzes & Ans!!
- Course
- Institution
ATMAE Study Guide Latest 2024 Quizzes & Ans!!
[Show more]
Content preview
Name: Score:58 Multiple choice questions
Definition 1 of 58
Soldering is done with fillers that melt at below _________ .
1000 °f (538°c).
600 °f (315°c).
840 °F (450°C).
1200 °f (649°c).
Definition 2 of 58
Joint clearances for both brazing and soldering commonly range from:
0.010 - 0.020 of an inch / 0.25 - 0.50 of a millimeter
0.0005 - 0.0015 of an inch / 0.0125 - 0.0375 of a millimeter
0.001 - 0.006 of an inch / 0.025 - 0.15 of a millimeter
0.100 - 0.200 of an inch / 2.5 - 5.0 of a millimeter
Definition 3 of 58
A limitation of the soldering process is:
Resistance to degradation
High cost
Becomes part of the weld
Lack of mechanical strength
,Definition 4 of 58
Weld process applicability is most dependent upon:
joint design
joint geometry
finalize die design
investment casting
Definition 5 of 58
Submerged arc welding takes place:
under a blanket of granular flux
the angular alignment of the blades
a separate gas shielding system
becomes part of the weld
Definition 6 of 58
The terms drawing, flanging, and hemming are examples of:
shaping
casting
molding
forming
, Definition 7 of 58
Laser beam welding usually takes place in:
repeated cycles of entry and exit motions of the cutting tool
the distance the tool edge travels in one cutter revolution
a high vacuum, a partial vacuum, the atmosphere, all of the above
a variety of ferrous and nonferrous alloys
Definition 8 of 58
The device(s) used to insure die component alignment are called:
a locking shaft
guide pins
bolts
dowel pins
Definition 9 of 58
Face mill cutting tools can have diameters ranging from:
from ten centimeters to two meters
a fixed size of exactly one meter
only between one and five centimeters
a few centimeters to over a half-meter
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller stuuviaa. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79373 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now