100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
NRPP Radon Measurement Technician and Professional| Questions and 100% Complete Solutions $12.99   Add to cart

Exam (elaborations)

NRPP Radon Measurement Technician and Professional| Questions and 100% Complete Solutions

 1 view  0 purchase
  • Course
  • Radon
  • Institution
  • Radon

NRPP Radon Measurement Technician and Professional| Questions and 100% Complete Solutions

Preview 3 out of 17  pages

  • October 23, 2024
  • 17
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Radon
  • Radon
avatar-seller
KenAli
NRPP Radon Measurement Technician and
Professional| Questions and 100% Complete
Solutions

What does closed-building conditions mean? - ✔1. All windows are closed
2. All exterior doors are closed, except normal entry and exit
3. Heating/cooling systems must be at normal occupied conditions (65-80°F)
4. Ventilation with outdoor air must be set to lowest possible ventilation conditions
5. No operation of whole-house fans or fireplaces
6. Avoid excessive operation of clothes dryers, range hoods, and bathroom fans
7. Do not blow fans directly at device

8. Normal operation of humidifiers and dehumidifiers, central vacuum cleaners, combustion air
fans, and attic fans
9. Window air conditioners on recirculation mode only
10. Evaporative/swamp coolers are not allowed to operate
11. Heat/Energy recovery ventilators operating at lowest setting
* If return ducts are under concrete floors, conduct at least one test when the air handler is on



When are closed building conditions required? - ✔For any short-term test lasting less than
4 days

,What is the minimum length of time for a long-term test? - ✔91 days



True or False - Closed building conditions are not required for a long-term test? - ✔True



What should mitigation decisions be based on? - ✔Results of long-term test or the average
of two short-term tests



When should you avoid radon testing? - ✔1. No short-term testing during unusual
severe weather
2. At the earliest convenience (moving in to a new home, construction)
3. When heating systems are not operating both day and night
4. Where any part of a building is not occupied for a good part of a 24 hour day



When is radon in water a problem? - ✔For homes with a private well



True or False - Sumps and groundwater draining systems can be radon entry points - ✔True



True or False - Operating a force air HVAC system decreases indoor radon concentrations
- ✔False



True or False - Swamp Coolers, whole house fans, and window are conditioners lower
radon concentrations - ✔True



What should be inspected/recorded when looking at a mitigation system? - ✔1.
Operational status of the system
2. Any temporary mitigation strategies
3. Any limits of the inspection
4. Proper pipe installation - watertight, sloped to the soil, and secure

, 5. Electrical connections and disconnects - a switch or labeled circuit breaker to turn off the fan

6. Verify a proper discharge point - at least 10 feet above grade and 2 feet above or 10 feet
to the side of operable windows
7. Mitigation fans are outside and not below a living space
8. Check the manometer

9. Labeling and system documentation - all components should be labeled and
documentation is attached to the system



Where should a radon test be placed? - ✔Where there are multiple foundation areas (slab-
on-grade, crawl space) and the lowest level of the home that could be occupied (Real Estate
Testing) or the lowest lived in level (Homeowner Testing)



What are the placement requirements for a radon test? - ✔3 feet from any opening to
the outdoors
20 inches above the floor
1 foot from an exterior wall
1 foot below the ceiling
4 inches from other test devices or objects



When is additional testing suggested? - ✔When there are multiple foundation areas
When the level of the home that is being tested is +2000 sq ft



When is a QC check required for passive radon device? - ✔Before use, after testing, and
check package and device for damage
*Any concerns must be reported to Qualified Testing Professional



When are QC checks required for CRMs? - ✔1. Before each use check for functionality and
do an instrument check per manufacturer directions

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller KenAli. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $12.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

77254 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$12.99
  • (0)
  Add to cart