Michigan State Brakes Certification/ 83 Quizzes with Certified Ans/ Latest Update.
5 views 0 purchase
Course
Michigan State Brakes Certification
Institution
Michigan State Brakes Certification
Michigan State Brakes Certification/ 83 Quizzes with Certified Ans/ Latest Update. Terms like:
On a 3-channel system, which wheels are on the same circuit? - Answer: both rear wheels
One way to test an ABS wheel speed signal is to use _____ on your digital multimeter. - Answer: AC volts
T...
Michigan State Brakes Certification/ 83 Quizzes
with Certified Ans/ Latest Update.
On a 3-channel system, which wheels are on the same circuit? - Answer: both rear wheels
One way to test an ABS wheel speed signal is to use _____ on your digital multimeter. - Answer:
AC volts
The key input for the ABS control module comes from the: - Answer: wheel speed sensors
ABS speed sensor and sensor rings: - Answer: should not be hammered or tapped on and
should always be replaced as a matched set
Flexible brake hoses should be replaced: - Answer: when dampness is evident on the hose
Which of the following should be used to check for rotor thickness variation: - Answer:
Micrometer
, After rebuilding a master cylinder, the rod between the master cylinder and booster should be: -
Answer: adjusted properly
Upon inspecting brake fluid condition, the technician observes the diaphragm in the master
cylinder cup is swollen. Which of the following is the most likely cause? - Answer: silicone fluid
added to the system
When inspecting brake fluid levels, a technician observes low fluid levels. which of the following
should be done first? - Answer: Inspect disc brake pads for excessive wear
Which of the following is true about most properly functioning anti-lock brake systems? -
Answer: The brakes may lock up at speeds less than 10 miles per hour
Which of the following is true about bleeding brake lines on most ABS equipped vehicles? -
Answer: Most ABS brake lines can be bled like a conventional (non-ABS) system. However,
caution must be taken because of the extreme pressure.
Most anti-lock brake systems require the removal of the pressure modulator fuse when: -
Answer: a "spaced-saver" spare tire is being used and mismatched tires are being installed
What does a load sensing proportioning valve do? - Answer: It increases the hydraulic pressure
during braking at the rear wheel cylinders when the vehicle is loaded
The brakes of a car squeal each time they are applied, which of the following is the LEAST likely
source of the noise? - Answer: Glazed brake pads
Which of the following is a true statement about proportioning valves? - Answer: They provide
better braking balance during hard stops
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Benzo. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.69. You're not tied to anything after your purchase.
