The basket slings on a gin pole perform what function? - Answers- Support part of the
weight and vertical forces
What is the minimum force that a work positioning system anchorage must be able to
withstand? - Answers- 2 times the arresting force or 3,000 lbs
What term identifies a monopole component? - Answers- Base flange
All antennas are presumed active - Answers- True
When calculating a fall distance using a 6 foot energy absorber, what is the maximum
pull out distance? - Answers- 4 feet
How often shall all gin poles have a documented job inspection? - Answers- Daily
What do the letters LOTO stand for? - Answers- Lockout Tagout
What does a tag person do? - Answers- Applied pressure on the tag rope to controls
the load
A capstan hoist is used on job sites for what purpose? - Answers- To raise and lower
loads
When operating a Capstan Hoist, or tagging the load on the Capstan, it is important to
wear what? - Answers- Gloves
What does a Ground Fault Circuit Interrupter (GFCI) do? - Answers- Shuts off flow of
electricity, senses a short circuit, and prevents electricution
Which of the following is not a component of the gross load? - Answers- Tag force
What motion indicates retract the boom - Answers- Both fists in front of your body with
your thumbs pointed towards each other
What is the heel block used for? - Answers- To change the direction of the load, jump or
tag line from horizontal to vertical
An overhaul ball provides what function in the operations? - Answers- Provides weight
allowing the load line to treturn the ground
When using bolts or u-bolts with a slotted hole present, what order are the components
installed? - Answers- Flat washer, lock washer, then nut
, If you have a 16 ft ladder leaning against a building wall, how many feet from the wall
does the base need to be to provide the correct slope? - Answers- 4 ft
For structural loading purposes the basket and bridle slings shall always be attached
where? - Answers- At a panel point around the leg
A hoist operator will respond to a stop signal from whom? - Answers- Any source
If the operator and signal person cannot see each other, what other way can they
communicate? - Answers- Radios
The three main components that make up a fall arrest system are - Answers-
Anchorage, Full body Harness, and connectors
What type of antenna is used to transmit signal from tower to tower? - Answers-
Microwave dish
For all power lines rated 50kv, the minimum clearance between the lines and any part of
the crane or load shall be - Answers- 20 feet
All cranes must have a posted load chat visible from the operators station? - Answers-
True
How often must a fire extinguisher be inspected by a qualified person? - Answers-
Annually
What is a crown block? - Answers- An upper sheave assembly on top of a structure
When using a fall restraint system, what is the minimum anchorage allowed? -
Answers- 1000 lbs
When using a y-lanyard attached to your back d-ring, at what height should the
connection to your anchorage take place? - Answers- Shoulder level or above
A company's health, safety and environment policy should be a combination of labor
regulation and ? - Answers- Industry standards
How many pounds force is one kilo Newton? - Answers- 225 lbs
Who is the third part group that approves and endorses standards? - Answers-
American national standards institute (ANSI)
When tagging a load, who will tell you when to stop tagging? - Answers- The capstan
operator and tower crew
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GEEKA. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.