Fire Inspector Final Exam Review || With Complete Questions & All Correct Answers (Rated A+)

Fire Inspector Final Exam Review || With Complete Questions & All Correct Answers (Rated A+) Fire Inspector Final Exam Review || With Complete Questions & All Correct Answers (Rated A+) Exterior walls and structural members that are of approved noncombustible or limited combustible materials and interior structural members constructed wholly or partly of wood are considered - ANSWER - Type III To protect steel structural components of a building, which of the following may be applied to protect the steel from heat? - ANSWER - Layers of gypsum board Curtain walls: - ANSWER - are nonbearing exterior walls Which of the following is a component in a required means of egress from normally occupied spaces? - ANSWER - Protected stairs unprotected noncombustible construction is: - ANSWER - generally limited to a maximum of two stories The ___________ plan shows the relative locations of walls, doors, windows and other features. - ANSWER - floor The common classifications of sprinkler systems include which of the following? - ANSWER - wet-pipe system Which of the following is a type of sprinkler system that maintains air under pressure in the sprinkler piping? - ANSWER - Dry pipe The color of a sprinkler head rated 500 degrees to 575 degrees, or "extra high" is" - ANSWER - Orange The color of a sprinkler head rated 250 degrees to 300 degrees or "high" is: - ANSWER - Blue Direct pumping water systems are those in which water: - ANSWER - is pumped directly into the distribution system The required residual pressure when computing available water supply in a specific are is _________ psi. - ANSWER - twenty Which detector is most apt to give a false fire indiction alarm when monitoring an area where arc welding is taking place? - ANSWER - Ultraviolet A(n) _____________ detector generally responds more quickly to smoldering fires. - ANSWER - photoelectric Smoke and fire dampers are typically located at points where: - ANSWER - HVAC ducts penetrate smoke and fire barrier walls Extinguishers suitable for Class A fires should be identified by a __________ containing the letter "A." If colored, it should be ____________. -