Exam (elaborations)
JPA SET 1/2 QUESTIONS & ANSWERS SOLVED 100% CORRECT!!
- Course
- Institution
JPA SET 1/2 QUESTIONS & ANSWERS SOLVED 100% CORRECT!!
[Show more]
Content preview
JPA SET 1/2 QUESTIONS & ANSWERS SOLVED100% CORRECT!!
What is the function of a vortex generator? Answer - It is designed to delay or
prevent separation of the boundary layer.
What are the three axes of an airplane? Answer - Longitudinal, lateral, and
vertical.
What are the three primary flight controls of an aircraft? Answer - The
ailerons, elevator, and rudder.
Name several secondary flight controls and describe their general purpose.
Answer - Secondary flight controls consist of various types of trim tabs such as
balance tabs, anti-servo and servo tabs, and spring tabs. Their function is to
assist the pilot in moving the controls and to trim the aircraft to fly hands-off.
Name several types of auxiliary flight controls and describe their general
purpose. Answer - The auxiliary flight controls consist of the various high-lift
devices used during low-speed flight such as leading and trailing edge flaps,
slats, slots, speed brakes, etc.
What is a servo trim tab? Answer - It is an auxiliary control, positioned by the
movement of a cockpit control and designed to create aerodynamic forces to
assist in moving a control surface.
,What is a spring tab? Answer - It is an auxiliary control designed to aid the
movement of a primary control at high speeds when control forces become too
high.
What is a balance trim tab? Answer - It is an auxiliary control designed to
create aerodynamic forces to assist in moving a control surface. The tab is
positioned by a control rod connected to the fixed surface on the same side as
the horn on the tab.
What are four most common types of high lift devices? Answer - Leading and
trailing edge flaps, slats, and slots.
Describe some of the tools used to check control surface travel. Answer - A
universal propeller protractor or special control surface protractor.
Name three mechanical methods by which flight control systems may be
actuated. Answer - Cables, push-pull rods, and torque tubes.
What is a fairlead? Answer - It is a device to prevent a cable from rubbing on
the aircraft structure.
What are the most likely places for a control cable to wear or break? Answer -
Where the cables pass over pulleys or through fairleads.
What information is required before a cable rigging chart can be used? Answer
- The ambient temperature and the cable size.
What is the function of a cable tension regulator? Answer - It automatically
adjusts the cable tension to compensate for expansion and contraction in the
aircraft structure.
, Describe the function of a rotorcraft collective pitch control. Answer - The
collective control causes each rotor blade to change its pitch angle by the same
amount, thus increasing or decreasing the lift produced by the rotor.
Describe the function of a rotorcraft cyclic pitch control. Answer - The cyclic
control tilts the main rotor disc by changing the pitch angle of each rotor blade
during its cycle of rotation, which causes the helicopter to move in the
direction the rotor tilts.
What mechanism is most commonly used to compensate for the torque
produced by the main rotor of a helicopter? Answer - The tail (or anti-torque)
rotor.
How is the amount of thrust produced by the tail rotor controlled? Answer - By
moving the foot pedals.
Why should control surfaces be locked when an aircraft is parked? Answer - To
prevent damage from the wind.
What is the major type of damage to aluminum structures that is caused by
exposure to the weather? Answer - corrosion
Name several methods for forming sheet metal. Answer - Bending or folding,
stretching, shrinking, bumping, and crimping.
What are the dimensions of a properly formed rivet head? Answer - The head
should be 1-1/2 times the shank diameter in width and 1/2 the shank diameter
in height.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller EvaTee. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $18.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75632 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now