True - ️️The cleaning of the primer pocket cannot be done until the primer is removed.
True - ️️The dent, coming from the firing pin striking the metal side of the primer, creates the pressure needed to ignite the priming mixture.
True - ️️The Hornady concentricity tool is useful due ...
True - ✔ ✔ The cleaning of the primer pocket cannot be done until the
primer is removed.
True - ✔ ✔ The dent, coming from the firing pin striking the metal side
of the primer, creates the pressure needed to ignite the priming mixture.
True - ✔ ✔ The Hornady concentricity tool is useful due to the ability to
bump ammo but cannot help with troubleshooting.
True - ✔ ✔ The shellholder is specific not to caliber, but rather to the
dimensions of the case head.
True - ✔ ✔ To achieve proper obturation on a resized case, it is
preferable to focus on the dimensions of a minimum chamber specification,
one that has only the slightest clearance needed to easily and safely chamber
the round.
True - ✔ ✔ Where no data exists for a given bullet weight, it is
sometimes possible to interpolate book data using the 1 grain of powder per
10 grains bullet weight.
Typical muzzle velocity - ✔ ✔ Which of the following is a difference
between shotguns and rifles?
Uniform - ✔ ✔ During case preparation it is important to ------ of the
above the flash hole.
, Wads - ✔ ✔ Which of the following seals the powder away from the shot
and prevents the burning gases from leaking through the balls of shot?
.001 inch - ✔ ✔ For extreme accuracy, cartridge run out should be kept
to:
100 yards - ✔ ✔ Though some shotguns are capable of more, most are
most effective under ----- yards
120 - ✔ ✔ According to the author, about _____ rounds should be initially
used to test the projectile that you have created.
A beam scale - ✔ ✔ Which reloading scale is accurate, inexpensive, and
not affected by changes in atmospheric pressure?
A concentricity guage - ✔ ✔ Which of the following measures the radial
run out of a finished round?
A one‑piece, injection‑molded, compression‑formed hull - ✔ ✔ The two
fundamental designs of plastic hulls in use today are a two-piece straight-
sided hull and
A powder trickler - ✔ ✔ Which of the following allows great precision in
your powder loading?
Adjusting the depth of the decapping pin's travel and thus the length of its rod
- ✔ ✔ Before you size the first case, what must be done to prevent the
decapping pin retainer from bottoming out and bending the rod?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller jackline98. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.49. You're not tied to anything after your purchase.
