Exam (elaborations)
MSSC Quality Study Guide with complete solutions
- Course
- Institution
MSSC Quality Study Guide with complete solutions
[Show more]
Content preview
MSSC Quality Study Guide withcomplete solutions
Blueprint Reading - Answers -
Determine the dimension of feature A in the object shown below (measurements are in
millimeters). - Answers -20 mm
The hole shown in the graphic is a ________. - Answers -counterbore
Identify the feature with arrows on the end - Answers -dimension line (see slides)
Which of the following instruments is used for measuring proper torque? - Answers -
calibrated torque wrench
What are the two types of assembly drawings? - Answers -exploded and basic
The specification for parts being produced at a workstation is 1.786+/- .005. Is a part
that has been produced at 1.780 out of spec? - Answers -yes, it is out of spec
Need a rule with: - Answers -3 17/32 inches measurement
Basic Measurement - Answers -
If a box of parts weighs 60 pounds, how many kilograms does it weigh? - Answers -
27.3(2) kilograms
To convert pounds (lbs) to kilograms (kg) multiply pounds by ____. - Answers -0.455
If a part weighs 70 lbs, how many kilograms? - Answers -31.85
To convert inches to millimeters, multiply inches by - Answers -25.4
Precision Measurement Tools - Answers -
Which device measures length to an accuracy of .0001 inch - Answers -micrometer
Which of the following measurement tools should be selected to measure a part that
has a length specification of 1.625 inches +/- .005? - Answers -micrometer
The measuring tool shown below is a - Answers -outside micrometer (see slides)
, Adjusting an instrument or device to a standard is called - Answers -calibration
To ensure continued accuracy, inspection devices must be periodically - Answers -
calibrated
When connected to a PC, a digital caliper can be used to - Answers -collect SPC data
Dimensional Gauging - Answers -
A _____________ is the total amount by which a specified dimension is allowed to vary
and still be a good part. - Answers -tolerance
Would a machined part that measures 39.11 mm be acceptable if the specified
tolerance for the part is given as 39.03 plus .05mm? = - Answers -No, the measured
part exceeds the upper limit
In general, how often should a surface finish gage be mastered/calibrated? - Answers -
as dictated by company standard operating procedures (SOP)
To ensure the accuracy of a Standard Operating Procedure it needs to be - Answers -
validated and approved
In the electronic field, the optical comparator uses which of the following as a means for
inspecting parts? - Answers -laser beam drawings
To eliminate indicator measurement error a device called a _________ is used as the
reference part. - Answers -gauge block
A special tool that is pre-set with a 2.00 inch gauge block fell off the surface plate but it
did not appear to be damaged. It is used for a "hot" job that needs to be shipped in the
afternoon. What should be done? - Answers -Check the tool with a 2.000 inch gage
block to ensure that it is still set properly.
What is the purpose of a surface plate? - Answers -Used as a reference surface
What is the most important item to appear on the calibration label of a tool that is used
to measure and test equipment - Answers -the date the tool is due for calibration
Quality Systems - Answers -
The most important measure of external quality is product performance as viewed by
the - Answers -customer
Of the four classification of quality costs, which one will provide the greatest dollar
savings versus dollars spent (return on investment)? - Answers -prevention costs
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller millyphilip. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75323 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now