100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
Previously searched by you
INTRODUCTION TO JOINT MULTI-TDL NETWORK (MTN) OPERATIONS JT101 (FOUO) (LINK-16 US MEMBERS STUDENT COURSE) QUESTIONS WITH COMPLETE SOLUTIONS$18.49
Add to cart
INTRODUCTION TO JOINT MULTI-TDL
NETWORK (MTN) OPERATIONS JT101
(FOUO) (LINK-16 US MEMBERS
STUDENT COURSE) QUESTIONS WITH
COMPLETE SOLUTIONS
Match the component of a Link 16 timeslot to the correct definition
a) Variable wait time before data pulses are transmitted that contributes to jam
resistance
b) Time allowed for the transmission to travel to potential receivers that determines the
maximum range of point-to-point connectivity
c) Contains the majority of information and is made up of 186 or 372 pulses depending
on packing structure
d) Consists of 72 pulses and provides time refinement and timeslot specific information
such as timeslot and message type - Answer-wrong:
abcd
Mutual Tracking is a plan in which all track-producing units will ___________. - Answer-
transmit their track data allowing correlation rules to determine the reporting
responsibility (R2)
Data Registration is ___________. - Answer-a condition of correct relative alignment
between local and remote track positional data
_________ produce and transmit surveillance tracks. - Answer-C2IUs
If a TN is in use, operators should be alerted and prohibited from assigning that TN. -
Answer-True
The legal Link 11/11B Track Qualities (TQs) are _____ while Link 16 TQs range from
_____. - Answer-0-7, 0-15
The only tracks that can't be manually correlated are: Select all that apply. [Remediation
Accessed :N]
A local track and a remote track
Simulated to live
Different environments of track with active environment conflict
Two remote tracks - Answer-not:
3 wo Different environments of track with active environment conflict
,_______ exist when the same track number is used by two or more IUs for two or more
different tracks. [Remediation Accessed :N] - Answer-not:
Environmental conflicts
Match the proper terminology to the correct definition
a) A set of protocols used to exchange J-Series messages using non-JTIDS/MIDS
equipment
b) The language Link 16 capable weapons systems use to exchange tactical
information
c) Conventions and record message formats that support information exchange defined
by MIL-STD-6016
d) Communications component of Link 16
JTIDS/MIDS
Link 16
J-Series Messages
JREAP - Answer-wrong:
a Link 16
b JTIDS/MIDS
c JREAP
d J-Series Messages
b JTIDS/MIDS
c J-Series Messages
a JREAP
d Link 16
b JTIDS/MIDS
a J-Series Messages
d Link 16
c JREAP
a Link 16
b JTIDS/MIDS
c JREAP
b J-Series Messages
The ____________ pseudo-randomly assigns a center frequency to each pulse.
[Remediation Accessed :N] - Answer-wrong:
Message Security (MSEC) crypto variable
What portion of the electromagnetic spectrum do Link 16 terminals operate?
[Remediation Accessed :N] - Answer-wrong:
225 - 400 MHz frequency band
175 - 255 MHz frequency band
, What is the link margin value that must be achieved to force an enemy jammer at equal
distance to a receiving Link 16 terminal to use 128 times more power than the
transmitting terminal? [Remediation Accessed :N] - Answer-wrong:
72 dB
31 dB
16 dB
Which of the following IS NOT true of the use of the Link 16 information assurance
feature known as double pulse transmissions? [Remediation Accessed :N] - Answer-
wrong:
Receiving terminal will decode the redundant information as normal
Provides redundancy to prevent against jamming-induced data loss
Which of the following IS NOT true of Link 16 spread spectrum processing? - Answer-
Decreases the power transmitted over any single frequency
Which Link 16 jam resistance characteristic defines the required distance between a
jammer and a receiver to jam Link 16 communications using equal power?
[Remediation Accessed :N] - Answer-Range ratio
wrong:
Link margin
Link 16 line-of-sight connectivity is limited by what type of signal propagation?
[Remediation Accessed :N] - Answer-wrong:
Skywave propagation
Each JTIDS/MIDS transmissions contains a ____________ pulse stream. [Remediation
Accessed :N] - Answer-72, 258 or 444
wrong:
51, 255 or 444
Which of the following are characteristics of a frame in Link 16 communications? Select
all that apply. [Remediation Accessed :N]
There are 112.5 frames in an epoch
The basic reoccurring unit of time
Each frame contains 1,536 timeslots
Each frame is 12 seconds in duration - Answer-wrong:
4
How many timeslots are in a frame in Link 16 communications? [Remediation Accessed
:N] - Answer-1,536
wrong:
64
Which of the following are true about a JTIDS/MIDS pulse stream? Select all that apply.
[Remediation Accessed :N]
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller biggdreamer. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $18.49. You're not tied to anything after your purchase.
