Physics Laboratory Report
Title (5 points)
Lab number and Title:Lab 111:
Projectile Motion
Name: Group ID:
Date of Experiment: 9/23/2021 Date of Report Submission: 9/30/2021
Course & Section Number:Physics 111A Instructor’s Name:
Partners’ Names:
1. INTRODUCTION (5 points)
1.1 OBJECTIVES
1.1.1 The objectives of this lab were mainly to study the motion of a
projectile and apply the kinematics equations for linear motion to
solve the problems given. Other objectives include predicting where a
target needs to be placed for the projectile to pass through it in
the air as well as calculate the range of the projectile if it is
initially shot at an angle.
1.2 THEORETICAL BACKGROUND
1.2.1 The background of this experiment makes us look at the behaviors of
projectiles when undergoing two dimensional motion. Specifically, how
to calculate different values like displacement, initial velocity,
and range based on constant acceleration (gravity) and initial height
given by the experimental procedure of setting up a canon with a
steel ball at a distance away, shooting the metal ball by pulling on
a string that held it back and measuring the distance it traveled (it
landed on carbon paper to help with marking) as well as comparing
that distance with the theoretical distance we previously calculated
with the linear motion equations.
2 EXPERIMENTAL PROCEDURE (5 points)
✔ Equipment: Mini Launcher attached to a base, steel ball (16mm diameter),
push rod, c-clamp, safety goggles, carbon and white paper, scotch tape,
ring target with one hold, tripod with right angle clamp to hold the ring
target, counter tray, plump bob, and a bubble level.
, ✔ Procedure: We begin by setting up the mini launcher by clamping it to the
table with the C-clamp. The inclination angle is then set by loosening the
screws and rotating the launcher to the desired angle. After, the steel
ball is loaded into the launcher with a pencil until a click is heard
which indicates that the trigger has caught the piston and it is primed to
shoot. The shortest length producing force is used. The steel ball is
released by pulling a string connected to the trigger. To test the
distance, the white and carbon paper are placed in the general vicinity of
the average distance the steel ball reaches once fired. The distance of
the ball is measured from the point in which the ball leaves the barrel.
3 RESULTS (30 points in total)
3.1 EXPERIMENTAL DATA (15 points)
✔ Table I
Trial 1 2 3 4 5 Average
Number
x 1.117m 1.104m 1.110m 1.108m 1.112m 1.1102m
y = 0.513m v0 = 3.427 m/s
✔ Table II
Target Height H Calculated D (cm) Measured D (cm) % Difference
(cm)
32.2cm 67.6cm 67.4cm 0.3%
23.5cm 81.6cm 81.4cm 0.2%
✔ Table IV (Height at 15° = 53.1cm)
Calculated D (cm)
143cm
✔
3.2 CALCULATION (15 points)
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller anyiamgeorge19. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.99. You're not tied to anything after your purchase.