100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
2024 TRAFFIC SUPERVISOR EXAMS|350 BRAND NEW EXAM QUESTIONS AND CORRECT ANSWERS,ALL GRADED A+|GUARANTEED SUCCESS|LATEST UPDATE $15.49   Add to cart

Exam (elaborations)

2024 TRAFFIC SUPERVISOR EXAMS|350 BRAND NEW EXAM QUESTIONS AND CORRECT ANSWERS,ALL GRADED A+|GUARANTEED SUCCESS|LATEST UPDATE

 0 view  0 purchase
  • Course
  • 2024 TRAFFIC SUPERVISOR
  • Institution
  • 2024 TRAFFIC SUPERVISOR

2024 TRAFFIC SUPERVISOR EXAMS|350 BRAND NEW EXAM QUESTIONS AND CORRECT ANSWERS,ALL GRADED A+|GUARANTEED SUCCESS|LATEST UPDATE Is a shadow vehicle used in all traffic zones? A. True B. False - ANSWER-False The shadow vehicle is occupied whenever workers are in the work area. A....

[Show more]

Preview 4 out of 41  pages

  • November 18, 2024
  • 41
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • 2024 TRAFFIC SUPERVISOR
  • 2024 TRAFFIC SUPERVISOR
avatar-seller
BRILLIANTSOLUTIONS
2024 TRAFFIC SUPERVISOR EXAMS|350
BRAND NEW EXAM QUESTIONS AND
CORRECT ANSWERS,ALL GRADED
A+|GUARANTEED SUCCESS|LATEST UPDATE
2024-2025



Is a shadow vehicle used in all traffic zones?
A. True
B. False - ANSWER-✔False

The shadow vehicle is occupied whenever workers are in the work area.
A. True
B. False - ANSWER-✔False

What class one light is the shadow vehicle equipped with?
A. Flashing Yellow Light
B. Oscillating Yellow Light
C. Yellow Strobe Light
D. All of the above - ANSWER-✔All of the above

When may cones be substituted for drums?
A. Daytime traffic control minimum height 18"
B. Daytime traffic control minimum height 28"
C. Daytime traffic control minimum height 36"
D. Daytime traffic control minimum height 42" - ANSWER-✔Daytime traffic control
minimum height 28"

When may cones be substituted for drums?
A. Daytime traffic control minimum height 18"
B. Daytime traffic control minimum height 28"
C. Daytime traffic control minimum height 36"
D. Daytime traffic control minimum height 42" - ANSWER-✔Daytime traffic control
minimum height 28"

, When cones are substituted for drums for nighttime closers, what is the minimum
cone height requirement?
A. 18"
B. 28"
C. 36"
D. 42" - ANSWER-✔42"

When cones are substituted for drums at nighttime closer, what is the maximum
cone spacing?
A. 20'
B. 30'
C. 40'
D. 50' - ANSWER-✔40'

What type of flashing warning lights are required when there is a nighttime lane
closer?
A. ROAD WORK AHEAD
B. LANE CLOSED AHEAD
C. A & B
D. NONE OF THE ABOVE - ANSWER-✔ROAD WORK AHEAD
&
LANE CLOSED AHEAD

If there is a lane closure of greater than three days, what is required?
A. Work zone dotted lines, 4' in length separated by 10' gaps, shall be provided to
identify the merge.
B. The appropriate color work zone edge lines shall be applied along the taper and
tangent sections.
C. All the above
D. None of the above - ANSWER-✔The appropriate color work zone edge lines shall
be applied along the taper and tangent sections.

Work zone pavement marking that conflict with final traffic lanes shall be temporary
paint.
A. True
B. False - ANSWER-✔False

What are the extra advance warning signs?
A. Lane Close Ahead
B. Watch for Stopped Traffic
C. Road Work Ahead
D. All the above - ANSWER-✔Lane Change Ahead
&
Watch for Stopped Traffic
&
Road Work Ahead

,Is the advisory speed plaque used in all traffic zones?
A. True
B. False - ANSWER-✔False

When the approach speed limit is 40 mph or less, 36" warning signs may be used.
A. True
B. False - ANSWER-✔True

Road Work Ahead signs shall be provided on entrance ramps or roadways entering
the work limits.
A. True
B. False - ANSWER-✔True

End Road Work signs are only required for lane closures of more than ______ day.
A. 1
B. 2
C. 3
D 4 - ANSWER-✔1

Sign spacing should be adjusted to avoid conflict with existing signs, minimum
spacing to existing signs shall be 200' for speeds of 45 mph or less and a minimum of
400' for speeds 50 mph or greater.
A. True
B. False - ANSWER-✔True

The minimum acceptable length for the merge taper shall be determined by
_________ the width of the offset by the merge taper rate.
A. Subtracting
B. Adding
C. Divide
D. Multiplying - ANSWER-✔Multiplying

The tangent (recovery area) section between the two merge tapers should be 2
times longer of the two merge tapers.
A. True
B. False - ANSWER-✔True

What is a fundamental principle of temporary traffic control?
A. To inconvenience motorists as much as possible so they will find another route.
B. To guide and direct motorists through or around the work area as efficiently as
possible. C. To make traffic move as slow as possible.
D. All of the above are fundamental principles. - ANSWER-✔To guide and direct
motorists through or around the work area as efficiently as possible.

What needs to be done when work is suspended for any length of time?
A. Take down the ROAD WORK AHEAD sign

, B. Cover up the END ROAD WORK sign
C. Erect a WORK SUSPENDED sign
D. Cover or remove the FLAGGER AHEAD sign - ANSWER-✔Cover or remove the
FLAGGER AHEAD sign

What are the four zones of a work area?
A. Activity area, pedestrian area, termination area and equipment area.
B. Advance warning area, transition area, activity area and termination area.
C. Equipment area, termination area, activity area and transition area.
D. Transition area, advanced warning area, pedestrian area and buffer zone. -
ANSWER-✔Advance warning area, transition area, activity area and termination
area.

Which of the following signs might you see in the advanced warning area?
A. END ROAD WORK
B. YIELD
C. EXIT OPEN
D. LEFT LANE CLOSED AHEAD - ANSWER-✔LEFT LANE CLOSED AHEAD

Which of the following is NOT a type of taper?
A. Shifting taper
B. Merging taper
C. Aligning taper
D. Downstream taper - ANSWER-✔Aligning taper

The formula for taper length on expressways with a speed limit of 65mph is which of
the following?

A. L = (WxS2)/60
B. L = WxS
C. L = W2xS
D. L = (S2x60)/W - ANSWER-✔L = WxS

What would the taper length be when closing a 12' lane on an expressway with a
speed limit of 60 mph?
A. 880'
B.780'
C.660'
D. 720' - ANSWER-✔720'

What would the taper length be when closing a 14' lane on a road with a speed limit
of 35 mph?
A. 235.3'
B. 285.8'
C. 288.5'
D. 490.0' - ANSWER-✔285.8'

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller BRILLIANTSOLUTIONS. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $15.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75323 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$15.49
  • (0)
  Add to cart