Examen

Z-51 EXAM QUESTIONS AND ANSWERS COMPLETE QUESTIONS WITH CORRECT ANSWERS RATED A+ UPDATED 2024/2025

0 fois vendu

Cours
Z51

Établissement
Z51

[Montrer plus]

Aperçu 4 sur 63 pages

Voir l'exemple

Publié le 20 novembre 2024
Nombre de pages 63
Écrit en 2024/2025
Type Examen
Contient Questions et réponses

vibrations
condenser
wires
single
phase
discharge
superheated
metering
z 51 exam questions

Établissement Z51
Cours Z51

$15.09

Ajouter au panier

Ajouter au liste de veux

Garantie de satisfaction à 100%
Disponible immédiatement après paiement
En ligne et en PDF
Tu n'es attaché à rien

Z-51 EXAM QUESTIONS AND ANSWERS
COMPLETE QUESTIONS WITH
CORRECT ANSWERS RATED A+
UPDATED 2024/2025

1. What can be said about the chilled water supply temperature of
55°? - ANSWER ✔ It is not ideal and frankly too high.

2. What is the compressor oil service valve used for? - ANSWER ✔
It is used to add and remove oil from the compressor crank case.

3. What components does the suction line tie together and connect? -
ANSWER ✔ The suction line connects the outlet of the
evaporator to the inlet side of the compressor this is also called the
low side or suction side.

4. In what form is the refrigerant on the suction line and what's the
average superheat in degrees? - ANSWER ✔ The refrigerant on
the suction line is a low-pressure vapor what's an average
superheated temperature of 7-12°.

5. What components does the liquid line tie together and connect? -
ANSWER ✔ The liquid line connects the outlet of the condenser

, to the metering device which is located on the inlet of the
evaporator.

6. What state is the refrigerant on the liquid line and to what degree is
it subcooled? - ANSWER ✔ The refrigerant on the liquid one is a
high pressure liquid subcooled about 10°.

7. What components does the discharge line tie together and connect?
- ANSWER ✔ The discharge line connects the outlet of the
compressor also called the high side or discharge side to the inlet
of the condenser.

8. At what state is the refrigerant on the discharge line and is it
superheated? - ANSWER ✔ The refrigerant on the discharge line
is a high-pressure vapor which is highly superheated. It enters as a
superheated vapor, picks up heat of compression in the compressor
and exits as a highly superheated vapor.

9. How many hot wires do three phase 460 or 480 V circuits have? -
ANSWER ✔ Three hot wires.

10. How many hot wires does a single phase 220 V circuit have?
- ANSWER ✔ It has two hot wires.

,11. In the absence of a cooling tower water treatment program
how often should the tower be flushed or the water replaced? -
ANSWER ✔ The water should be drained regularly each week
one or two times a week and replaced with fresh clean water.

12. What could occur if you fail to close the condenser water? -
ANSWER ✔ High condenser pressure could occur.

13. What does the muffler do in a refrigeration system? -
ANSWER ✔ It reduces noise, pulsations or vibrations.

14. Where is the muffler located? - ANSWER ✔ On the
discharge line.

15. What type of machine is a centrifugal compressor? -
ANSWER ✔ It is a high-volume low-pressure Machine.

16. How many pounds above the suction pressure is the
compressors oil pressure control, cut in point? - ANSWER ✔ 15-
30 pounds.

17. What is a transformer most commonly used for in a
refrigeration system? - ANSWER ✔ To step down voltage from
120 V to 24 V.

, 18. What form of heat is removed in the condenser? - ANSWER
✔ Both sensible and latent heat.

19. What do semi hermetic compressor's use to cool the motor? -
ANSWER ✔ They use the suction vapor of the machine.

20. Where is the water supply to the suction side of a lift pump
located? - ANSWER ✔ The water supply to the pump suction is
located below the pump level.

21. What does a thermostatic expansion valve maintain? -
ANSWER ✔ The thermostatic Expansion valve maintains a
constant evaporator superheat.

22. Is 55° chill water supply acceptable temperature for comfort
cooling? - ANSWER ✔ No, 55° chill water supply is too high for
comfort cooling. Optimal temperatures according to most chiller
designs is 45 F supply and 55 F return.

23. What does the drip on the pump packing gland indicate? -
ANSWER ✔ The drip shows that there is water in the pump.

Les avantages d'acheter des résumés chez Stuvia:

Qualité garantie par les avis des clients

Les clients de Stuvia ont évalués plus de 700 000 résumés. C'est comme ça que vous savez que vous achetez les meilleurs documents.

L’achat facile et rapide

Vous pouvez payer rapidement avec iDeal, carte de crédit ou Stuvia-crédit pour les résumés. Il n'y a pas d'adhésion nécessaire.

Focus sur l’essentiel

Vos camarades écrivent eux-mêmes les notes d’étude, c’est pourquoi les documents sont toujours fiables et à jour. Cela garantit que vous arrivez rapidement au coeur du matériel.

Foire aux questions

Qu'est-ce que j'obtiens en achetant ce document ?

Vous obtenez un PDF, disponible immédiatement après votre achat. Le document acheté est accessible à tout moment, n'importe où et indéfiniment via votre profil.

Garantie de remboursement : comment ça marche ?

Notre garantie de satisfaction garantit que vous trouverez toujours un document d'étude qui vous convient. Vous remplissez un formulaire et notre équipe du service client s'occupe du reste.

Auprès de qui est-ce que j'achète ce résumé ?

Stuvia est une place de marché. Alors, vous n'achetez donc pas ce document chez nous, mais auprès du vendeur SmartscoreAaron. Stuvia facilite les paiements au vendeur.

Est-ce que j'aurai un abonnement?

Non, vous n'achetez ce résumé que pour $15.09. Vous n'êtes lié à rien après votre achat.

Peut-on faire confiance à Stuvia ?

4.6 étoiles sur Google & Trustpilot (+1000 avis)

69052 résumés ont été vendus ces 30 derniers jours

Fondée en 2010, la référence pour acheter des résumés depuis déjà 15 ans

Commencez à vendre!