Exam (elaborations)
ICC Welding Practice Questions with correct answers
ICC Welding Practice Questions with correct answers
[Show more]
Seller
Follow
Content preview
ICC Welding Practice Questions withcorrect answers
Given, a column is 29 feet long. What is the maximum variation in straightness? - ✔✔0.3625; D1.1
5.23.1
Reference is made to Figure 6.4 in AWS D1.1, 2006. What is the maximum size discontinuity allowed in
3/4" thick complete penetration groove weld ? - ✔✔1-1/16"; D1.1 F6.4(a)
If welding ASTM A913 steel of
thickness exceeding 1 1/2 inches (38 mm)
without use of preheat, what is the
maximum diffusible hydrogen permitted
from the filler metal being used? - ✔✔8ml/100g (H8); D1.1 T3.2
For welding structural steel under AWS
D1.1, which welding process does not
require qualification testing? - ✔✔SMAW, SAW, GMAC (not -S), FCAW; D1.1 3.2.1
Given: two pieces of 1/4 inch flat bar is
to be connected with a lap joint. What is
the minimum overlap of material in this
stress-carrying lap joint? - ✔✔1-1/4"; D1.1 2.8.1.2
The specified depth of a welded girder
is 36 inches. What is the maximum depth
of this member? - ✔✔36-1/8"; D1.1 5.23.9
ICC Service Technician Study Guide Questions & Answers
,For welding reinforcing steel, a welder
qualified using #8 (#25) bar, is qualified
to weld reinforcing bars - ✔✔#8 and up; D1.4 6.3.2.2
What is the maximum SMAW
electrode diameter when welding in the
vertical or overhead position, if the WPS
is to be prequalified? - ✔✔3/16"; D1.1 T3.7
When welding sheet steel, the permitted
length of undercut of an arc spot weld of 1
inch diameter (25 mm) is - ✔✔pi/8 or 0.39; D1.3 6.1.1.4
Reference is made to a CJP Groove
Weld column splice (in compression) on
material with a minimum tensile strength
of 70 ksi. What is the minimum filler
metal tensile strength required for this
application? - ✔✔10 ksi less than matching filler metal=60 ksi?; D1.1 T2.3
Reference is made to a CJP Groove
Weld column splice (in compression) on
material with a minimum tensile strength
of 70 ksi. What is the minimum filler
metal tensile strength required for this
application? - ✔✔10 ksi less than matching filler metal=60 ksi?; D1.1 T2.3
For a welded built-up beam with a
specified depth of 10 inches (250 mm),
ICC Service Technician Study Guide Questions & Answers
, what is the acceptable range of actual
depths following completion of welding? - ✔✔10 +/- 1/8; D1.1 5.23.9
Submerged arc welding flux received
in damaged packaging must be discarded
or dried under what conditions? - ✔✔Minimum temperature of 500F for 1 hr before use; 5.3.3.2
Nondestructive testing is required on a
particular long complete penetration
groove weld in a welded subassembly.
The design professional has determined
that spot testing of this weldment will be
sufficient. What is the minimum length of
each spot test? - ✔✔At least 1 in a 4"; D1.1 6.15.3
What is the effective area of a 1 inches
thick complete penetration groove weld
that is 6 inches long? - ✔✔6 sq.in ; D1.1 2.3.1.5
For a flare-V groove weld between
two reinforcing bars specified to be 4
inches (100 mm) in length, what is the
acceptable length? - ✔✔4" - what is specified; D1.4 2.3.2.2
A 5/16 inch fillet weld is used to
connect two 1/2 inch steel plates in a "T"
configuration. The fillet weld is 6 inches
in length. What is the effective area of this
fillet weld? - ✔✔1-7/8 sq.in; D1.4 2.3
ICC Service Technician Study Guide Questions & Answers
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Lectphilip. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
49051 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 15 years now