FSR Study Guide W4 D1 QUESTIONS & ANSWERS 100% CORRECT!!
2 views 0 purchase
Course
FSR W4 D1
Institution
FSR W4 D1
What is the minimum welded splice for Thermoplastic membranes? - ANSWERS1-1/2 inches
What plate and fastener must be used over steel decks when installing a MFS? - ANSWERSPiranha Plates and HPX Fasteners
What is the fastening density for approved insulation for TPO MFRS systems on warrantie...
FSR Study Guide W4 D1 QUESTIONS &
ANSWERS 100% CORRECT!!
What is the minimum welded splice for Thermoplastic membranes? - ANSWERS1-1/2
inches
What plate and fastener must be used over steel decks when installing a MFS? -
ANSWERSPiranha Plates and HPX Fasteners
What is the fastening density for approved insulation for TPO MFRS systems on
warranties up to 15 years, new roof with acceptable decking? - ANSWERS1 plate and
fastener every 8 square feet
When are TPO "T" Joints required? - ANSWERS60 mil and greater splice intersections
What is required to be used at PVC.060 splice intersections? - ANSWERSNo T-Joint
required
With a Design "A" system, which substrates allow insulation fastening to be reduced
with 55-mph wind speed? - ANSWERS22 GA Steel/Structural Concrete / Min 15/32"
Plywood 1-1/2" Thick Wood Plank decKS
On 25 and 30 year MFRS projects, what is required beyond the listed minimum
perimeters? - ANSWERSAdditional perimeter sheet
Is a 25 or 30 Year Warranty available for a TPO MFRS over an OSB Deck? –
ANSWERSNo
What needs to be done at coated metal edging joints? U-1B - ANSWERSLeave a 1/8"-
1/4" gap and weld a 3" & 6" section of Non-Reinforced TPO Flashing over the joint
At what heights can TPO membrane not be adhered to curbs? - ANSWERS12" and
fastened under counter-flashing & 18" when a term bar/ coping used
At what slope does the use of the automatic welder become difficult? - ANSWERS5" in
12"
What is the minimum penetration required by Carlisle into a 22 gauge steel deck using
HP-X Fasteners? - ANSWERS3/4"
What is the maximum temperature that TPO can come in contact with? - ANSWERS160
degrees F
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller papersmaster01. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $15.99. You're not tied to anything after your purchase.
