100% tevredenheidsgarantie Direct beschikbaar na betaling Zowel online als in PDF Je zit nergens aan vast
logo-home
Unit 22, Assignment 3 - Forming and Assembling Fabrication Materials (P4, P5, M1, M2) $7.56
In winkelwagen

Antwoorden

Unit 22, Assignment 3 - Forming and Assembling Fabrication Materials (P4, P5, M1, M2)

 0 keer verkocht
  • Vak
  • Instelling

BTEC Engineering Level 3

Voorbeeld 2 van de 5  pagina's

  • 16 mei 2020
  • 5
  • 2017/2018
  • Antwoorden
  • Onbekend
avatar-seller
Assignment 3 Forming and Assembling Fabrication Materials Unit 22

In this 3rd assignment of unit 22, I will begin by describing how materials are formed before
they are assembled into a fabricated structure.

The fabricated structure I manufactured & assembled was Model Stock Car. Below are the
parts I manufactured & I will describe what materials & tools I used.
Part No. Part Name Required Material and Description
1 Bonnet 1 1.5mm, Aluminium (polished or painted)
2 Chassis 1 1.5mm, Aluminium (polished or painted)
3 Roof / Rear Panel 1 1.5mm, Aluminium (polished or painted)
4 Bonnet Trim 1 3mm, Coloured Acrylic (polished)
5 Grill 1 3mm, Coloured Acrylic (polished)
6 Grill Support 1 20 x 10 x 2mm, Aluminium Angle (polished)
7 Windscreen Support 1 20 x 10 x 2mm, Aluminium Angle (polished)
8 Windscreen 1 1.5mm, Aluminium (polished or painted)
9 Left Side Panel 1 1.5mm, Aluminium (polished or painted)
10 Right Side Panel 1 1.5mm, Aluminium (polished or painted)
11 Left Mudguard 1 1mm, Brass (polished)
12 Right Mudguard 1 1mm, Brass (polished)

Image on the right displays
Part No. 9, 10 (Left & Right
Side Panel), 8, 6 & 7. For these
five parts, I used the same
method & tools to complete
them, & they were:
- Steel Rule for accurate measurements
- Scribe to mark out the dimensions, where the holes
will need drilling & where it will need bending
- (Find proper name for the cutting ting) to cut as
accurately as I could to the markings I
made of the design, & then filed
excess brass.
- Compass to mark out accurate angles to file from within
the metal.
- Drilling Machine to drill all the holes (diameter of 3.5mm)
& made a larger hole where the gaps are in the centre, to
make it easier to file from inside.
- File & Round File to scrape off the metal to make the
gaps in the pieces.
- Sandpaper to smoothen the edges & make it more presentable.




P4 Fahim Mohammed

, Assignment 3 Forming and Assembling Fabrication Materials Unit 22

The picture on the left shows Part No. 11 & 12. The tools I used to
get my end design to what it looks like now was a:
- Scribe to mark out the dimensions, where the holes will
need drilling & where it will need bending.
- Steel Rule for accurate measurements.
- (Find proper name for the cutting ting) to cut as accurately
as I could to the markings I made of the design, & then file
excess brass.
- Compass to mark out accurate angles.
- File
- Hand Drill (with a drill-bit diameter of 3.5mm) to drill two
holes on each piece.
- Sandpaper to smoothen the edges & make it more
presentable.



For the Part No. 4 & 5, I used a:
- Pen to mark out the dimensions, where
the holes will need drilling & where it will
need bending.
- Steel Rule for accurate
measurements.
- Coping Saw to cut out of pieces.
- File to remove any unwanted
acrylic.
- Hand Drill (with a drill-bit of 4.5mm (for Part 5) & 3.5mm (for Part 4)).
- Sandpaper to smoothen the edges & make it more presentable.
I used the same tools for these three pieces (Part
No. 1,2 & 3), & they were a:
- Drilling Machine to drill all the holes
(diameter of 3.5mm) & made a larger hole where
the gaps are in the centre, so it can be filed
afterwards.
- Scribe to mark out the dimensions,
where the holes will need drilling & where it will
need bending.
- Steel Rule for accurate
measurements.
- (Find proper name for the cutting
ting) to cut as accurately as I could to the
markings I made of the design, & then file
excess brass.
- Compass to mark out accurate angles.
- File
- Sandpaper to smoothen the edges & make
it more presentable.




P4 Fahim Mohammed

Voordelen van het kopen van samenvattingen bij Stuvia op een rij:

√  	Verzekerd van kwaliteit door reviews

√ Verzekerd van kwaliteit door reviews

Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!

Snel en makkelijk kopen

Snel en makkelijk kopen

Je betaalt supersnel en eenmalig met iDeal, Bancontact of creditcard voor de samenvatting. Zonder lidmaatschap.

Focus op de essentie

Focus op de essentie

Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!

Veelgestelde vragen

Wat krijg ik als ik dit document koop?

Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.

Tevredenheidsgarantie: hoe werkt dat?

Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.

Van wie koop ik deze samenvatting?

Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper misterf. Stuvia faciliteert de betaling aan de verkoper.

Zit ik meteen vast aan een abonnement?

Nee, je koopt alleen deze samenvatting voor $7.56. Je zit daarna nergens aan vast.

Is Stuvia te vertrouwen?

4,6 sterren op Google & Trustpilot (+1000 reviews)

Afgelopen 30 dagen zijn er 75341 samenvattingen verkocht

Opgericht in 2010, al 15 jaar dé plek om samenvattingen te kopen

Start met verkopen

Laatst bekeken door jou


$7.56
  • (0)
In winkelwagen
Toegevoegd