Correct Answers
Activation of any manual fire alarm pull station must: - Answer-activate the audible and
visual alarms on the floor where activated, one floor above and the floor below (if
applicable).
The correct way to reset the fire alarm system after an alarm is activated from a manual
fire alarm pull station? - Answer-The pull station must be reset to its normal position and
then the main panel is reset.
A water flow from SPRINKLER is considered a (an): - Answer-Fire alarm system
The Fire Alarm Panel's Reset Switch should only be activated _________. - Answer-
Upon orders of the Fire Dept. Officer in charge
An Out of Service Fire Protection System requires the Impairment Coordinator to notify:
- Answer-Certificate of Fitness Holder of system. Fire Dept. Borough Dispatcher.
Central Station. Insurance Carrier
A Fire Guard must (after initial 4 hours): - Answer-Have a F-01 Certificate of Fitness. Be
maintained continuously for 24 hours a day. Patrol all areas at least once an hour
All of the following are correct statements regarding Standpipe systems except? -
Answer-Standpipes are required in Buildings over 100 feet in height
A Fire Department Connection that serves a combination Standpipe/ Sprinkler system
shall be painted? - Answer-Yellow
All portions of exposed Standpipe Systems are required to be painted Red except? -
Answer-Gauges
Select the incorrect statement regarding Fire Department Connections: - Answer-Fire
Department Connections require hydrostatic testing every 10 years.
In a Standpipe system the Automatic Ball Drip valve is installed for what purpose? -
Answer-To drain water between the lower check valve and the outside Fire Department
connection