This experiment is for lab manual Physics 2, De Huai Chen, it contains the whole lab report, answers and data included. This includes experiment 2. Practice in series and parallel connections, practice on the use of digital multimeter and light bulbs in series and parallel connections.. I received ...
Experi ment 2 : Resistors in series and parallel connections Lab Date: 07/04/2020 Report Date: 07/10/2020 Melany Rodriguez TA: Kalpani Nisansala Udeni Galpayage Dona Section 00 4 PURPOSE The purp ose of this experi ment i s to practice on the us e of di gital multimeter and light bulbs in series an d parallel connections. THEORY When applied across a conductor , a voltage or potential difference and the current in the conductor is found to be prop ortional to the voltage. This experiment is based on Ohm ’s Law when determining resistance of a resistor by using a ratio of potenti al difference and electric current. The ratio of the applied vol tage a nd the resulting current is defined as resistance of the conductor , which offers resistance to the current called resistors. These are connected from head to tail . The change in ele ctric energy per unit time is called electric power. In a series circu it, the first resistor output current flows into the second resist or’s input, meaning the current is the same in each resistor . In a parallel circu it the resistor leads on one side of t he resistors and are connected . All the leads on the other side are con nected to gether. EXPERIMENTAL METHOD Mate rials: One digital multimeter ( DMM), D C power supply with a 5V adaptor (#1), DC power supply (#2), four light bulbs with sockets, banana connectors, and demo box of resistors. Measurement 1: 1. Check that the DC sup ply power #1 is off. Connect the circuit. 2. Turn on the DC power supply #1. 3. Record the DMM readi ng and the observed bulbs ’ brightness. 4. Turn off the DC p ower supply #1. 5. Repeat steps 1 -4 for circuit in fig . 4 (b). 6. Repeat steps 1 -4 for circuit in fig . 4 (c). 7. Repeat steps 1 -4 for circuit in fig . 4 (d). 8. Repeat steps 1 -4 for circuit in fig . 4 (d). but with one bu lb remo ved from its socket. Measurement 2: 1. Make sure the DC power suppl y #1 is off and con nect the circuit shown in Fig 5. 2. Turn on the power supply #1. 3. Record the DMM reading and the observed bulbs ’ brightness in Table 2. 4. Turn off the DC power supply #1 . 5. Repeat steps 1 -4 for c ircuit in fi g. 5 (b). 6. Repeat steps 1 -4 for c ircuit in fi g. 5 (c). 7. Repeat steps 1 -4 for c ircuit in fi g. 5 (d). 8. Repeat steps 1 -4 for circuit in fi g. 5 (d), but with one bulb is remo ved fr om it s socket. Measurement 3: 1. Make sure the D C power supply #1 is off and connect the circuit shown in F ig 6. 2. Turn o n the D C power supply #1.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller mariel14. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $5.49. You're not tied to anything after your purchase.
