Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed
Document Content and Description Below
Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed The inspector is not required to determine ____ ___ of any system or component. -Years of age ...
professional home inspector exam nhie trec questions and answers already passed
Written for
Home Inspector
Home Inspector
1
review
By: royadarvishian • 9 months ago
Seller
Follow
QuickPass
Reviews received
Content preview
Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed The inspector is not required to determine ____ ___ of any system or component. ✔✔-Years of age -Life expectancy -Make model Horizontal waste pipe should slope ____ inch per foot ✔✔1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed ✔✔Also called weep screed. Used at the base/bottom of stucco walls to release moisture . Pressure Vacuum Breaker (PVB) ✔✔Used for Backflow Prevention. Lawn Irrigation systems: installed vertically 6 to 12 inches above highest outlet/emitter and b efore the irrigation system valves. Lintel ✔✔L shaped steel installed to support brick veneer above openings such as windows and doors. Should bear on 6 inches or greater of the supporting veneer. Rusted lintels may expand and cause cracks around openings . Guardrail for decks and patios ✔✔A deck 30" above grade requires a guardrail. Required if deck is > or = to 30 inches above grade. Balusters and openings should not exceed 4 inches in diameter. Rail height must be > or = to 36 inches from deck. Minimum overlap on vertically installed fiber cement siding ✔✔1 1/4 inches overlap, and blind nailing recommended Distance required between wall cladding and roof covering materials? ✔✔1" to 2" (1 inch minimum, some local code is 2") What is the concern with a Double sided key lock deadbolt ✔✔All means of egress (escape), must be operable from the inside without special knowledge or tools. A keyed lock is a danger . Fiberglass shingle roof that is 5 years old is losing granular and cupping. Attic insulation and venting is adequate. What is the most reasonable explanation? ✔✔Improper installation. Sealing strip or nailing was not done properly. What is the last part to fail in a slate roof system? ✔✔The slate itself. Flashings eventually wear out, but long before the slate. Metal roof has minor rust in spots. What is the corrective action? ✔✔Removing the rust, priming and painting. What type of flashing is found on a gable edge? ✔✔Rake edge or edge flashing. A gable Edge is called a rake. Which construction fra ming provides fire blocking? ✔✔a platform -framed structure The Bottom chords of trusses were cut to fit other construction. What is the recommendation? ✔✔Recommend a structural engineer . What purpose does a barometric damper serve? ✔✔To control the draf t Water is dripping from discharge piping coming from a hydronic heating system. What is most likely the cause? ✔✔A leak Masonry Chimney is required to be _____ inches from wood framing in the attic? ✔✔2" When new insulation is placed directly over old in the attic, what is the correct way to place / handle Kraft paper on new insulation? ✔✔Score or remove the vapor paper What two structural components would be tied together with hurricane ties? ✔✔Truss/rafter to the top of walls What type of piping is used for a pool circulation system? ✔✔Schedule 40 PVC Does the main water supply shutoff have to be above grade, below grade, or accessible? ✔✔Accessible ? Distance between interior electrical receptacles? ✔✔12' A wood burning furnace should be how far away from combustibles ✔✔18" Dishwasher drain line is installed where in reference to the trap? ✔✔Above stairs, staircase tread depth ✔✔Tread depth should be a minimum of 10 inches. 11 inches if there is no nosing. The difference between any two riser he ights, treads or nosing in a flight of stairs should be no more than 3/8ths of an inch Staircase Nosing projection ✔✔Nosing should project between 3/4th inch and 1 1/4th inch The difference between any two riser heights, treads or nosing in a flight of st airs should be no more than 3/8ths of an inch Staircase Riser height ✔✔Riser height should be 7 3/4th inches maximum The difference between any two riser heights, treads or nosing in a flight of stairs should be no more than 3/8ths of an inch Stair strin gers and width ✔✔Stairs wider than 36 inches should have at least three stringers Spiral staircase ✔✔Tread depth should be a minimum of 7 1/2 inches, measured 12 inches from the narrow side. Riser height should be 9 1/2 inches maximum. Minimum width is 2 6 inches at / below the handrail Hearth size requirements for greater than and smaller than 6 square feet ✔✔6' opening - 16" in front and 8" sides Over 6' - 20" and 12" What is a cricket or saddle? ✔✔A ridge structure designed to divert water on a roof around the high side of a chimney or the transition from one roof area to another Deadman ✔✔any type of anchor embedded in the supported soil and tied to the retaining wall Egress window ✔✔A window large enough, as defined by local building codes, for ex it or entry in case of an emergency. Typically required in bedrooms. Size: Height above floor:
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller QuickPass. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £5.75. You're not tied to anything after your purchase.
