Bundle for NACE Tests | Updated & Verified | with Complete Solution

Dew point is the temperature at which - ANS - condensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred course...

To evaluate a client's reason for seeking care, the nurse performs deep palpation. The purpose of deep palpation is to assess which of the following? - ANS - Correct Answer: Organs The purpose of deep palpation, in which the nurse indents the client's skin approximately 1-1/2", is to assess un...

What is the cause of chalking in epoxy coating - ANS - UV or radiation exposure What is polymerization cured coating? - ANS - Two parts mixed together just prior to use Examples of non-convertible coatings - ANS - 1. Chlorinated rubber 2. Vinyl 3. Acrylic 4. Bituminous Non-convertible curing def...

NACE Student Manual! START OF CHAPTER 1 Corrosion is an electrochemical process involving A) flow of protons and electrons B) flow of neutrons and ions C) flow of protons and ions D) flow of electrons and ions E) flow of resistance and resistivity - ANS - d Metal loss or corrosion occurs at ...

You are reviewing the documentation for a tank painting project and notice there is a conflict between the project specification and the manufacturer's product date sheet on the required DFT of the primer. The owner is not reachable for clarification. What should be done? - ANS - Follow the spec...

All corrosion of iron at normal ambient conditions is - ANS - an electrochemical process The cathode of a corrosion cell - ANS - has an opposite electrical polarity to the anode Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic ...