pipefitter Exam Bundle (Graded A) Updated 2023

What does TE in TE-601 stand for? - ANSWER-temperature element what does B.T.U stand for? - ANSWER-British Thermal Unit what is the boiling point of water? - ANSWER-212*F What is 3.1416? - ANSWER-Pi what is the circumference of a 15" pipe? (to the nearest tenth0 - ANSWER-47" 4" in ...

When riser clamps are used to support insulated pipes, the insulation is_______________. - ANSWER-put on over the clamp also Some pipe clamps are attached to the walls directly. - ANSWER-True Pipe supports can be fabricated in the field as long as they_______________. - ANSWER-meet design spec...

Pipefitting used to join female ends of threaded pipe of different sizes is referred to as a__________ - ANSWER-swedge A pump that can be submerged into a liquid in order to remove that liquid is called_________________ - ANSWER-A sump pump Employees working in excavation can be protected from...

An RJT flange has the disadvantage that in order to remove a fitting, you must . - ANSWER-spread the flanges enough to remove the ring Temperatures below 500°F and pressures below 600 psi are considered____________. - ANSWER-low temperature/low pressure Gaskets are chosen to suit the temperat...

NPT - ANSWER-National Pipe Thread NPS - ANSWER-Nominal Pipe Size NC - ANSWER-National Course T.O. - ANSWER-Take-off XLR and correct take off for a 90 degree fitting - ANSWER-2 x NPS LR and correct take off for a 90 degree fitting - ANSWER-1 1/2 x NPS SR and correct take off for 90 ...

Value of pi - ANSWER-3.1416 formula for circumference of a circle - ANSWER-C=(pi)d formula for area of a circle - ANSWER-A=πr² formula for volume of a cylinder - ANSWER-V = πr²h what is the Pythagorean theorem used for? - ANSWER-finding the length of a side of a right triangle when 2...

A vertical pipe filled with 10' of water has a head pressure of: - ANSWER-4.33 psi Threaded bushings are MOST commonly used when: - ANSWER-Attaching threaded pipe to instrument tubing The PREFERRED method for cutting a pipe socket welding, is the: - ANSWER-Band Saw Process What is the take...

1/2" - ANSWER-Sight Glass Minimum Connection 3/4" - ANSWER-Low Water Cut-off Draw Minimum Connection 1" - ANSWER-Water Column Minimum Connection 3/4" - ANSWER-Control Manifold Minimum Connection 1/4" - ANSWER-Sight Glass Drain Minimum Connection 1" - ANSWER-Bottom Blow-Off Minim...

OSHA approved anchorage point - ANSWER-when working from a suspended scaffold, wear a safety belt that is securely tied to the 3 1/2 - ANSWER-a toe board must be what minimum height to comply with OSHA safety standards for scaffolding? 30 PSI - ANSWER-What maximum Air pressure may be used for ...

Protective plastic pipe from long time sun exposure because it blank - ANSWER-Will degrade SDR indicates the ratio between the pipes outside diameter and it's - ANSWER-Wall thickness The number of types of plastic pipe that the plumbing industry uses primarily as blank - ANSWER-Six ABS pip...