IBC Fireproofing Exam 2023/2024 Graded A+ SI Certs Fireproofing Practice Test 1-3 2023 Fire Protection Systems Written Test 2023 Sprayed applied fire Proofing Exam AWCI Manual 12A (SFRM Practice Questions/Material) Fireproofing Inspector Exam Preparation AWCI Manual 12B Review with Complete Solutio...
[Show more]
Special inspections - ANSWER-_____ for sprayed fire resistant materials applied to floor, roof and wall assemblies and structural members shall be in accordance with Sections 1705.13.1 to 1705.13.6. Approved construction documents - ANSWER-Special inspections shall be based on the fire resistance...
Preview 1 out of 3 pages
Add to cartSpecial inspections - ANSWER-_____ for sprayed fire resistant materials applied to floor, roof and wall assemblies and structural members shall be in accordance with Sections 1705.13.1 to 1705.13.6. Approved construction documents - ANSWER-Special inspections shall be based on the fire resistance...
1x sold
What is the minimum allowable TFIFRM thickness determination? - ANSWER-80% of specified thickness How many TFIFRM thickness determinations are required for a W-shape column? - ANSWER-24 How many TFIFRM thickness readings are required for a pipe column? - ANSWER-24 Suppose you are performing...
Preview 2 out of 5 pages
Add to cartWhat is the minimum allowable TFIFRM thickness determination? - ANSWER-80% of specified thickness How many TFIFRM thickness determinations are required for a W-shape column? - ANSWER-24 How many TFIFRM thickness readings are required for a pipe column? - ANSWER-24 Suppose you are performing...
Refer to Figure 21. - Using the chart, determine the temperature range for a fire-extinguishing agent storage container with a pressure of 330 P.S.I.G. - Consider 330 P.S.I.G for both minimum and maximum pressure. - ANSWER-45 to 73°F. A carbon dioxide (CO2) hand-held fire extinguisher may be u...
Preview 1 out of 3 pages
Add to cartRefer to Figure 21. - Using the chart, determine the temperature range for a fire-extinguishing agent storage container with a pressure of 330 P.S.I.G. - Consider 330 P.S.I.G for both minimum and maximum pressure. - ANSWER-45 to 73°F. A carbon dioxide (CO2) hand-held fire extinguisher may be u...
Physical and visual test - ANSWER-Conditon of substrate Thinkness of application Density in pounds per cubic food (kg/m3) Bound strength adhesion/conhesion Condition of finshed application structure member surface condition - ANSWER-Surfaces shall be prepared accordance with approved fire res...
Preview 1 out of 2 pages
Add to cartPhysical and visual test - ANSWER-Conditon of substrate Thinkness of application Density in pounds per cubic food (kg/m3) Bound strength adhesion/conhesion Condition of finshed application structure member surface condition - ANSWER-Surfaces shall be prepared accordance with approved fire res...
Which standards/codes are included in AWCI Manual 12A? - ANSWER-ASTM E119, UL 263, ULC S101-M What are Sprayed Fire Resistive Materials according to UL? - ANSWER-UL no longer recognizes the terms cementitious or sprayed fiber to differentiate between sprayed fireproofing products. They are combin...
Preview 2 out of 6 pages
Add to cartWhich standards/codes are included in AWCI Manual 12A? - ANSWER-ASTM E119, UL 263, ULC S101-M What are Sprayed Fire Resistive Materials according to UL? - ANSWER-UL no longer recognizes the terms cementitious or sprayed fiber to differentiate between sprayed fireproofing products. They are combin...
What is the purpose of Manual 12B? - ANSWER-To provide field inspection procedures for the testing of thin-film intumescent fire resistive materials (TFIFRM) applied to structural members at thicknesses not greater than 660 mils (16.76 mm) Who should inspect the substrate conditions prior to appl...
Preview 1 out of 4 pages
Add to cartWhat is the purpose of Manual 12B? - ANSWER-To provide field inspection procedures for the testing of thin-film intumescent fire resistive materials (TFIFRM) applied to structural members at thicknesses not greater than 660 mils (16.76 mm) Who should inspect the substrate conditions prior to appl...
A permit must be pulled for a retaining wall more than ______ high - ANSWER-4' Who may revoke a permit if it was issued in error or in violation of an ordinance ? - ANSWER-The Building Official ___________ __________ can issue a notice of violation - ANSWER-Building Department Type _______...
Preview 2 out of 5 pages
Add to cartA permit must be pulled for a retaining wall more than ______ high - ANSWER-4' Who may revoke a permit if it was issued in error or in violation of an ordinance ? - ANSWER-The Building Official ___________ __________ can issue a notice of violation - ANSWER-Building Department Type _______...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller CLOUND. Stuvia facilitates payment to the seller.
No, you only buy these notes for $22.99. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
82871 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
