CBSPD BUNDLED Exams 2023 with 100% correct answers

Chemical indicators that are used to test the humidity, temperature, sterilant or a variety of parameters of the sterilization process are called? - correct answer -Chemical Integrators. There are four primary objectives for all packaging materials. Each of the following is one of them EXCEPT? - ...

Bacillus stearothermophilus - correct answer -An organisms that a is commonly used as an indicator organism for the appropriate functioning of autoclaves because it grows at 56°C Bacillus atrophaeus - correct answer -spore used to monitor EtO and dry heat sterilization efficacy Bacteria - cor...

The air flow in the preparation and packaging area must be maintained at: A. Negative pressure B. Positive pressure C. Automatic pressure D. Constant pressure - correct answer -B. Positive pressure The preparation and packaging area MUST have an air exchange rate of: A. 4 per hour B. 6 ...

Steam Using Gravity Displacement: Method of Killing - correct answer -Denatures microorganism proteins Steam Using Gravity Displacement: Sterilant Used - correct answer -Combination of steam and ambient air Steam Using Gravity Displacement: How do steam and ambient are sterilize? - correct ans...

What is the Area Temp & Humidity for Decontamination? - correct answer -60 deg to 65 deg F, 30% to 60% Humidity What is the air exchange rate & pressure type for Decontamination? - correct answer -10 air exchanges per hour under Negative Pressure What is the Area Temp & Humidity for the Steril...

Which of the following is a major cause of AER failures? - correct answer -Using incorrect connectors Which agency requires that eyewash stations be available for emergency use? - correct answer -OSHA (Occupational Safety and Health Administration) The OSHA Hazard Communication Standard requir...

Compliance with Regulations issued by EPA (Environmental Protection Agency), FDA (Food & Drug Administration) and OSHA (Occupational Safety & Health Administration) are: - correct answer -D. Required by law and therefore mandatory Defined in simple terms, Ethics is the practice of _________ . -...

Flexible endoscopes MUST be competently reprocessed so that - correct answer -Patient care is not adversely affected Ethics is the practice of: - correct answer -conforming to accepted and professional standards of conduct The Health Insurance Portability and Accountability Act (HIPAA) provide...

Which of the following agencies regulates clearances for glutaraldehyde-based disinfectants? - OSHA - CDC - EPA - FDA - correct answer FDA Which agency is responsible for employee health and safety at work? - EPA - FDA - CDC - OSHA - correct answer OSHA Recommended practices are: - St...

Why is it important to evenly distribute large instruments in a set? A. Extra condensation will make the set more difficult to dry B. It came help with storage C. Easier to carry D. None of the above - correct answer A. Extra condensation will make the set more difficult to dry Which of the follo...

Main role of sterile processing is: - correct answer -provide reliable services to enhance quality of patient care instruments sets and patient care equipment processing and distributing must be done accurately and timely so: - correct answer -patient care is not adversely affected Ethics is -...

Why is it Important to evenly distribute large instruments in a set? - correct answer -Extra condensation will make the set more difficult to dry. Which of the following best describes the overall role of the CS/SPD? - correct answer -To provide dependable service to enhance patient care. Whic...

The main role of the sterile processing area is to - correct answer -provide dependable reliable services to enhance the quality of patient care. Instruments sets and patient care equipment processing and distributing must be done accurately and timely so: - correct answer -patient care is not ad...

which of the following is an example of surgical asepsis? - correct answer -Sterilization of instruments. whenever there are major changes made to packaging, such as switching the type of packaging material or containers used, what should always be done? - correct answer -Product testing should a...