MAE Exam Bundle Questions and Answers 100% Verified

Implicitly defined - ANSWER-hidden from the sketcher Coincident - ANSWER-forces two points to coincide Concentric - ANSWER-makes the centers of arcs or circles coincide Collinear - ANSWER-forces a line to be collinear to another line Linear constraints - ANSWER-define the distance betwee...

Why are most cave drawings and hieroglyphics not considered to be engineering drawings? - ANSWER-Becuase they were mostly documentation of lifestyle, not instructions on how to build something In what ways did the design of military fortifications change after the discovery of gunpowder and the i...

To create an extrusion, I must first draw a sketch on a surface. True? - ANSWER-Yes, but the surface must be flat What are the fundamental types of sketch constraints? - ANSWER-Geometrical and dimensional To clock a hexagonal feature so that it rests horizontally on one side, I would... - ANSW...

I bring a part into an assembly in SolidWorks, and click the OK check mark at the top right. This will.. - ANSWER-leave the part in a floating state; align component with the assembly origin I bring a cube into an assembly and mate-coincident one of its edges to a fixed edge. It now has how man...

lathe - ANSWER-the workpiece is rapidly rotated about a single axis turning - ANSWER-Circumferential grooves and screw threads are made using this process, as are stepped, tapered, and rounded shaft boring - ANSWER-Removal of material on the inside of the workpiece drilling - ANSWER-a rapid...

Profile of a Line - ANSWER-Arc Profile of a surface - ANSWER-Semi-circle True Position - ANSWER-Crossed Circle RC - ANSWER-Running and Sliding Fit FN - ANSWER-Force and Shrink Fit LC - ANSWER-Locational Fit H11/c11 - ANSWER-Loose running fit for comercial tolerences or allowances o...

Problem Identification (Design process, STEP 1) - ANSWER-the design engineer must address questions and answers from the customer's/client's perspective and from the engineer's perspective. -may involve generating new ideas, or improving an existing design -may use MARKET SURVEY to determine ...

Advantages of GD&T - ANSWER-1) The system allows the designer to clearly specify design intent. 2) There is better communication throughout the design process. 3) The system is set up so that almost nothing can be interpreted in more than one way. 4) A datum reference frame 5) Specific form, ori...

the overall moment-of-inertia. - ANSWER-is claculated by summing up all the moments-of-inertia; which are calculated by multiplying the mass of the piece by the distance from the axis Mass properties are the ________ properties of a solid body - ANSWER-static This measure command returns the a...

interference - ANSWER-amount of overlap between two instances in an assembly clearance - ANSWER-minimum distances between two instances in an assembly arc - ANSWER-A curved entity that represents a portion of a circle boundary boxes - ANSWER-A square box used to sketch circles or ellipses ...

Associated with the European method of creating the orthographic projections where you see the front face and draw what you see in the back. Same with top showing on bottom and right showing on the left. - ANSWER-First-Angle American form of creating orthographic projections where the face that i...

In the creation of solid models, computer-generated geometry was referred to as parts, features, or objects; however, the objects that make up a system are referred to as - ANSWER-components In assembly modeling, the copies of a component within the system are called - ANSWER-instances A _____...

base instance: - ANSWER-The one fixed instance within an assembly. bill of materials: - ANSWER-A tabular list of the components, with quantities of each for the parts, that make up an assembly. bottom-up modeling: - ANSWER-The process of creating individual parts and then creating an assembly ...

What are some problems with pictorials? - ANSWER-the distortion of angles, the distortion of true lengths, the distortion of Internal measurements, the distortion of curves Then the general rule for presenting the object becomes: - ANSWER-"Start with the preferred configuration; then add or subt...