ASNT Bundled Exams All Versions and Courses 2024/2025 Full solution pack

Contain a colored (usually red) dye - Answer-Visible dye Penetrant Contain a combination of visible and fluorescent dyes - Answer-Dual Sensitivity Penetrants Which process contains penetrants that are either self-emulsifying or removable with plain water? - Answer-Water-washable Process that req...

back surface reflection - Answer-The indication on the instrument display that represents the far boundary of the material being tested is called: ation - Answer-In immersion testing, the position of the transducer is often varied to transmit sound into the test part at various angles to the fro...

Eddy currents are circulating electrical currents induced in conductive materials by: - Answer-an alternating magnetic field The method used to generate eddy currents in a test specimen by means of a coil can most closely be compared with the action of a: - Answer-transformer Electromagnetic tes...

What are the minimum and maximum solder temperatures? - Answer-One for the answers was from 250-450°F which is less than 850°F where brazing starts. What temperature does brazing start? - Answer-850°F 1 curie(Ci)=3.7x10^10 becquerel(Bq) - Answer-Conversion of Curie to Bq A UT inspection that ...

Fracture is a type of material failure. Of the following which is another type of material failure? - Answer-Permanent deformation. Which of the following statements best differentiates between a defect and a discontinuity? - Answer-Discontinuities can propagate and become defects. Nondestructiv...

1. The indication on the instrument display that represents the far boundary of material being tested is called: - the back-surface reflection. 2. In immersion testing, the position of the transducer is often varied by a manipulator to transmit sound into the test part at various angles to the fr...

the interference field near the face of a transducer is often referred to as the _____ - Answer-Fresnel zone in a test where the transducer is not perpendicular to the inspection surface, the angle of incidence is equal to _________ - Answer-Angle of Reflection a separate time base line imposed ...

SNT-TC-1A is not intended to be used as a strict specification. - Which of the following statements is true concerning the usage of SNT-TC-1A? Written and stated in general terms - The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must be: May engage an ou...

ASNT NDT level 3 certification is a requirement of: - Answer-CP-189. A currently valid ASNT NDT level 3 certificate indicates: - Answer-that the certificate holder has satisfied the basic and method exam requirements as set forth in SNT-TC-1A. ASNT NDT level 3 certification: - Answer-makes an ind...