NCCER Bundled Exams Questions and Answers 100% Verified and Updated 2024 | Graded A

Power Tools Study Guide with 100% Complete Solutions Pneumatic tools get their power from: - Answer- Air pressure. The most common use of the power drill is to: - Answer- Make holes in wood, metal, and plastic. A masonry bit is able to drill into concrete and similar material because it has a: -...

NCCER Module 8 (employability skills) Questions and Answers 100% Pass a companies documented philosophy is called its? - Answer- mission statement the time to learn about a potential employer is? - Answer- before an application is ever submitted when preparing a resume, you should? - Answer- fo...

power tools NCCER Exam Questions and Answers 100% Pass what does pneumatic mean? - Answer- Air power What kind of power does a porta power use? - Answer- Hydraulic power The most common use of the power drill is to what? - Answer- Make holes in wood, metal, and plastic Hammer drills are design...

NCCER Electrical module 2 (electrical safety) Questions and Answers 100% Pass under strict safety guidelines, which of the following should be used to discharge capacitors before working on de-energized circuits. - Answer- safety shorting probe for safety, assume that any facility constructed be...

NCCER Module 3 (Hand Tools) Questions and Answers 100% Pass what is another name for a machinist hammer? - Answer- Ball-peen hammer a heavy duty tool used to drive posts or other large stakes is called a? - Answer- Sledgehammer what is the proper angle for the edge of a cold chisel? - Answer- 6...

NCCER Module 4 Intro to power tools Exam Questions and Answers 100% Pass A saw that has a thin one-piece blade that runs around guides, that runs around either end of the saw is a - Answer- Band saw A power miter saw combines a miter box with a - Answer- Circular saw An angle grinder is used to...

NCCER Electrical module 5 (NEC) Exam Questions and Answers 100% Pass NEC chapter 5 contains? - Answer- specialty occupancy areas which of the following serves as the intro to the NEC and provides an overview of the book? - Answer- NEC article 90 organizations that test products for safety are? ...

NCCER Module 4 (Power tools) Exam Questions and Answers when using power tools, never engage the? - Answer- trigger lock. before replacing parts such as bits, blades or disks on any tool, you must? - Answer- make sure it is disconnected from its source or energy most hammer drills will not hamm...

NCCER Module 1 (safety) Questions and Answers 100% Pass | Verified & Updated companies with strong safety cultures usually have lower? - Answer- incident and accident rates what is a statement regarding safety? - Answer- it's a learned behavior and attitude poor lighting, excessive noise, and ...

NCCER Module 9 (material handling) Questions and Answers 100% Pass before attempting to lift any materials? - Answer- make sure the load does not have perusing nails wires or sharp edges before attempting to lower an overhead load? - Answer- size up the load what is the proper procedure to lift...

NCCER 2024 Exam Questions Marking Scheme 100% Correct NCCER is a ___________ - Answer- not-for-profit 501(c)(3) educational foundation Building a safe, productive, and sustainable workforce of craft professionals is _________ - Answer- the mission of NCCER NCCER standardized curricula have been ...

NCCER Exam Questions and Answers 100% Pass The plane in space where the centrifugal force pushing an object out into space is equal to the gravitational force pulling an object toward Earth is called a - Answer- geostationary orbit A multipoint-to-point satellite uplink/downlink configuration is...

NCCER Module 4 (Power tools) & construction drawings EXAM 150 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) | ALREADY GRADED A+ when using power tools, never engage the? - Answer- trigger lock. before replacing parts such as bits, blades or disks on any tool, you must? - Answer- mak...

NCCER Test Marking Scheme 100% Verified A UL listed rod type ground electrode must have minimum length of - Answer- 8'' in a circuit of pure capacitance, the current leads the voltage by - Answer- 90 degrees The standard unit for measuring the cross sectional area of wire is the - Answer- circu...

NCCER Module 4 Intro to power tools Exam Questions and Answers 100% Pass A saw that has a thin one-piece blade that runs around guides, that runs around either end of the saw is a - Answer- Band saw A power miter saw combines a miter box with a - Answer- Circular saw An angle grinder is used to...

power tools NCCER ACTUAL EXAM QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) 100% Verified what does pneumatic mean? - Answer- Air power What kind of power does a porta power use? - Answer- Hydraulic power The most common use of the power drill is to what? - Answer- Make holes in wood...

NCCER Hand Tools Questions and Answers 100% Verified ball-peen hammer - Answer- another name for a machinist's hammer sledge hammer - Answer- a heavy-duty tool used to drive posts or other large stakes 60 degree angle - Answer- the proper angle for the edge of a cold chisel reed and prince - An...

NCCER Module 2 Exam Questions and Answers 100% pass An estimator is preparing a bid for a home remodeling project. She has determined that the new garage needs 324 feet of 2x10 lumber; the new rec room requires 430 feet; and the new upstairs bonus room needs 283 feet. How many feet of 2x10 lumber...

NCCER Core Module 1 Exam Questions and Answers 100% Pass Companies with strong safety cultures usually have lower? - Answer- Turnover Poor lighting, excessive noise, and inadequate guards for moving parts are examples of - Answer- unsafe conditions The activity that consists of breaking a job i...

Basic Safety - NCCER EXAM QUESTIONS AND CORRECT DETAILED ANSWERS 100% Verified Apparatus - Answer- An assembly of machines used together to do a particular job Arc - Answer- The flow of electrical current through a gas such as air form one pole to another pole Arc Welding - Answer- The joining ...