Package deal
Millwright Exam Package Deal with complete solutions 2024/2025
Millwright Exam Package Deal with complete solutions 2024/2025
[Show more]Millwright Exam Package Deal with complete solutions 2024/2025
[Show more]Millwright Interprovincial (Red Seal) Review 
Exam 3 Questions With 100% Correct 
Answers 
1. How is efficiency found? 
A) output over input 
B) input over output 
C) output times input times 100 
D) output times input divided by hp - answerA) Output over input 
2. What is the maximum capacity in kg...
Preview 2 out of 13 pages
Add to cartMillwright Interprovincial (Red Seal) Review 
Exam 3 Questions With 100% Correct 
Answers 
1. How is efficiency found? 
A) output over input 
B) input over output 
C) output times input times 100 
D) output times input divided by hp - answerA) Output over input 
2. What is the maximum capacity in kg...
Millwright Test Exam Questions With 
Verified Answers 2024/2025 
If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ 
wear tracks will be the indicator. - answerUnusual 
For removing hard to remove gasket materials found on sealing surfaces ______ is 
recom...
Preview 2 out of 12 pages
Add to cartMillwright Test Exam Questions With 
Verified Answers 2024/2025 
If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ 
wear tracks will be the indicator. - answerUnusual 
For removing hard to remove gasket materials found on sealing surfaces ______ is 
recom...
Millwright - Rigging and Hoisting Exam 
Questions With Verified Answers 
1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to 
retain 
250lbs? 
a. 50 lbs 
b. 100 lbs 
c. 250 lbs 
d. 75 lbs - answera. 50 lbs 
250lbs/5 = 50 lbs 
2. What diameter rope is neede...
Preview 2 out of 12 pages
Add to cartMillwright - Rigging and Hoisting Exam 
Questions With Verified Answers 
1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to 
retain 
250lbs? 
a. 50 lbs 
b. 100 lbs 
c. 250 lbs 
d. 75 lbs - answera. 50 lbs 
250lbs/5 = 50 lbs 
2. What diameter rope is neede...
Millwright Red Seal Study 1 Exam Questions 
With Verified Answers 
Which of the following best describes a free flow control valve? 
A) It is the simplest form of directional control allowing flow in one direction only 
B) They are used to prevent a load suspended by a cylinder from free fall 
C) Th...
Preview 3 out of 26 pages
Add to cartMillwright Red Seal Study 1 Exam Questions 
With Verified Answers 
Which of the following best describes a free flow control valve? 
A) It is the simplest form of directional control allowing flow in one direction only 
B) They are used to prevent a load suspended by a cylinder from free fall 
C) Th...
Millwright Period 4 Exam Results Questions 
With Verified Answers 
Engine Block Rejection - answerMost common reason: cracks after cleaning and inspection. 
Steam Turbine Class - answerRated up to 700 psig and 399°C: class 3 turbine. 
Gas Turbine Seals - answerUsed on compressor and turbine: labyri...
Preview 2 out of 5 pages
Add to cartMillwright Period 4 Exam Results Questions 
With Verified Answers 
Engine Block Rejection - answerMost common reason: cracks after cleaning and inspection. 
Steam Turbine Class - answerRated up to 700 psig and 399°C: class 3 turbine. 
Gas Turbine Seals - answerUsed on compressor and turbine: labyri...
Millwright 1 Exam Questions With Verified 
Answers 
What are the 2 classes of hydraulics? 
Hydrostatic & Hydrodynamic 
What causes pressure drop in a hydraulic line? 
Excessive Fluid Velocity 
What causes aeration in a hydraulic pump? 
Air in the suction line 
What type of hydraulic cylinder is indi...
Preview 1 out of 2 pages
Add to cartMillwright 1 Exam Questions With Verified 
Answers 
What are the 2 classes of hydraulics? 
Hydrostatic & Hydrodynamic 
What causes pressure drop in a hydraulic line? 
Excessive Fluid Velocity 
What causes aeration in a hydraulic pump? 
Air in the suction line 
What type of hydraulic cylinder is indi...
Millwright Level 1 Exam Questions With 
Verified Answers 
On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - 
answer1/8 inch 
The kind of abrasive material used in grinding wheels for general purpose applications is: - 
answeraluminum oxide 
A blotter is use...
Preview 3 out of 19 pages
Add to cartMillwright Level 1 Exam Questions With 
Verified Answers 
On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - 
answer1/8 inch 
The kind of abrasive material used in grinding wheels for general purpose applications is: - 
answeraluminum oxide 
A blotter is use...
Millwright Test Practice 1 Quizlet Exam 
Questions With Verified Answers 
Other than scraping what other uses can a three-sided scraper be used for? - answerDeburr 
Holes 
What is a cape nose chisel used for? - answerCut grooves such as keyways 
What should you do with the end of chisels and punches...
Preview 1 out of 3 pages
Add to cartMillwright Test Practice 1 Quizlet Exam 
Questions With Verified Answers 
Other than scraping what other uses can a three-sided scraper be used for? - answerDeburr 
Holes 
What is a cape nose chisel used for? - answerCut grooves such as keyways 
What should you do with the end of chisels and punches...
Millwright level 4 INTERNAL 
COMBUSTION ENGINES Exam Questions 
With Verified Answers 
Before performing maintenance on a recently run engine, you must: 
A) Drain all oil from the crankcase 
B) Check and record the hour meter 
C) Disconnect all electrical, close, lock, tag and purge all gas sources ...
Preview 3 out of 23 pages
Add to cartMillwright level 4 INTERNAL 
COMBUSTION ENGINES Exam Questions 
With Verified Answers 
Before performing maintenance on a recently run engine, you must: 
A) Drain all oil from the crankcase 
B) Check and record the hour meter 
C) Disconnect all electrical, close, lock, tag and purge all gas sources ...
Preventive Maintenance Millwright Level 4 
Exam Questions With Verified Answers 
Which is not a measure of amplitude? 
A. displacement 
B. velocity 
C. acceleration 
D. Vibration 
D. Vibration 
140. What style of maintenance involves scheduling and periodic disassembly of machines 
for inspection 
A...
Preview 1 out of 4 pages
Add to cartPreventive Maintenance Millwright Level 4 
Exam Questions With Verified Answers 
Which is not a measure of amplitude? 
A. displacement 
B. velocity 
C. acceleration 
D. Vibration 
D. Vibration 
140. What style of maintenance involves scheduling and periodic disassembly of machines 
for inspection 
A...
Belts test - Millwright level 2 Exam Questions 
With Verified Answers 
High capacity V-Belts 
-Also called wedge, hi-torque, or narrow v-belts 
-The three sizes are 3C, 5V, & 8V. Meaning they have 3/8", 5/8", and 8/8" (1") of top width. 
What does 3V2550 indicate? 
3/8" width and 25" pitch lin...
Preview 2 out of 5 pages
Add to cartBelts test - Millwright level 2 Exam Questions 
With Verified Answers 
High capacity V-Belts 
-Also called wedge, hi-torque, or narrow v-belts 
-The three sizes are 3C, 5V, & 8V. Meaning they have 3/8", 5/8", and 8/8" (1") of top width. 
What does 3V2550 indicate? 
3/8" width and 25" pitch lin...
Millwright prep level 4 conventional 
alignment Exam Questions With Verified 
Answers 
When equipment is aligned, the _________ are collinear - answerShaft center lines 
Rotating shafts are usually aligned with the ________ in Place. - answerCouplings 
The two ways that a coupling must be aligned ar...
Preview 1 out of 2 pages
Add to cartMillwright prep level 4 conventional 
alignment Exam Questions With Verified 
Answers 
When equipment is aligned, the _________ are collinear - answerShaft center lines 
Rotating shafts are usually aligned with the ________ in Place. - answerCouplings 
The two ways that a coupling must be aligned ar...
Millwright Level 4 Turbines Exam 
Questions With Verified Answers 2024/2025 
Carbon rings are used to seal the steam within the casing of steam turbines. why is this 
method effective on impulse type steam turbines? 
A. low casing pressure 
B. minimal maintenance 
C. high shaft surface speeds 
D. co...
Preview 2 out of 14 pages
Add to cartMillwright Level 4 Turbines Exam 
Questions With Verified Answers 2024/2025 
Carbon rings are used to seal the steam within the casing of steam turbines. why is this 
method effective on impulse type steam turbines? 
A. low casing pressure 
B. minimal maintenance 
C. high shaft surface speeds 
D. co...
Millwright Level 4 Final Prep Exam 
Questions And Answers 100% 
Fire extinguishers involving electrical equipment have the letter? 
A. C 
B. D 
C. A 
D. B 
A. C 
A class B fire extinguisher is for? 
A. wood and paper fires 
B. electrical fires 
C. magnesium fires 
D. oil and gas fires 
D. oil and ga...
Preview 4 out of 83 pages
Add to cartMillwright Level 4 Final Prep Exam 
Questions And Answers 100% 
Fire extinguishers involving electrical equipment have the letter? 
A. C 
B. D 
C. A 
D. B 
A. C 
A class B fire extinguisher is for? 
A. wood and paper fires 
B. electrical fires 
C. magnesium fires 
D. oil and gas fires 
D. oil and ga...
Millwright Level 4 Electrical Exam 
Questions And Answers 100% 
Fuses are circuit protection devices. what fuse component provides the HRC type fuse with 
the ability to interrupt currents up to 300,000 Amps without failure? 
A. very large contacts 
B. parallel fusible links 
C. sand filled 
D. seri...
Preview 2 out of 15 pages
Add to cartMillwright Level 4 Electrical Exam 
Questions And Answers 100% 
Fuses are circuit protection devices. what fuse component provides the HRC type fuse with 
the ability to interrupt currents up to 300,000 Amps without failure? 
A. very large contacts 
B. parallel fusible links 
C. sand filled 
D. seri...
Millwright Prep Level 4 Conveyors Exam 
100% Solved 
The purpose of conveyors is to _______ materials. - answerTransport 
The first thing you need to do before working around any conveyor is - answerFind the 
emergency shutoff control 
Loose belts underneath belt conveyors are held by - answerIdlers...
Preview 1 out of 2 pages
Add to cartMillwright Prep Level 4 Conveyors Exam 
100% Solved 
The purpose of conveyors is to _______ materials. - answerTransport 
The first thing you need to do before working around any conveyor is - answerFind the 
emergency shutoff control 
Loose belts underneath belt conveyors are held by - answerIdlers...
Millwright Level 4 Final review Exam 
Questions And Answers 
A variable displacement pump is a pump that 
A. the volume of fluid can be altered per cycle 
B. the speed of the pump can be altered 
C. the pressure can be changed per revolution 
D. can pump only fire resistant oil 
A. The volume of flu...
Preview 4 out of 42 pages
Add to cartMillwright Level 4 Final review Exam 
Questions And Answers 
A variable displacement pump is a pump that 
A. the volume of fluid can be altered per cycle 
B. the speed of the pump can be altered 
C. the pressure can be changed per revolution 
D. can pump only fire resistant oil 
A. The volume of flu...
Millwright-Preventive and Predictive 
Maintenance Exam Questions With Verified 
Answers 
Preventive maintenance - answeris the periodic inspection and maintenance of plant assets 
and equipment to uncover conditions that may to equipment failure or shortened life 
This measures the amount of contami...
Preview 2 out of 10 pages
Add to cartMillwright-Preventive and Predictive 
Maintenance Exam Questions With Verified 
Answers 
Preventive maintenance - answeris the periodic inspection and maintenance of plant assets 
and equipment to uncover conditions that may to equipment failure or shortened life 
This measures the amount of contami...
Millwright Intermediate Trade Math Exam 
Questions With Verified Answers 
Area of Triange - answerA=1/2bh 
Area of a circle - answerA=πr² 
Volume of a rectangular solid - answerV=lwh 
Volume of a cylinder - answerV=πr²h 
Volume of a sphere - answerV=4/3πr³ 
Volume of a pyramid - answerV=1/3Bh ...
Preview 1 out of 2 pages
Add to cartMillwright Intermediate Trade Math Exam 
Questions With Verified Answers 
Area of Triange - answerA=1/2bh 
Area of a circle - answerA=πr² 
Volume of a rectangular solid - answerV=lwh 
Volume of a cylinder - answerV=πr²h 
Volume of a sphere - answerV=4/3πr³ 
Volume of a pyramid - answerV=1/3Bh ...
Millwright Rigging & Lifting Exam 
Questions With Verified Answers 2024/2025 
The breaking strength of rope is 
a. force needed to pull rope 
b. force needed to tear rope 
c. force needed to break the rope 
d. force needed to stretch rope - answerc. force needed to break the rope 
What are spreader ...
Preview 3 out of 17 pages
Add to cartMillwright Rigging & Lifting Exam 
Questions With Verified Answers 2024/2025 
The breaking strength of rope is 
a. force needed to pull rope 
b. force needed to tear rope 
c. force needed to break the rope 
d. force needed to stretch rope - answerc. force needed to break the rope 
What are spreader ...
Millwright Interprovincial (Red Seal) Review 
Exam 3 Questions With 100% Correct 
Answers 
1. How is efficiency found? 
A) output over input 
B) input over output 
C) output times input times 100 
D) output times input divided by hp - answerA) Output over input 
2. What is the maximum capacity in kg...
Preview 2 out of 13 pages
Add to cartMillwright Interprovincial (Red Seal) Review 
Exam 3 Questions With 100% Correct 
Answers 
1. How is efficiency found? 
A) output over input 
B) input over output 
C) output times input times 100 
D) output times input divided by hp - answerA) Output over input 
2. What is the maximum capacity in kg...
Millwright Alberta Period 1 Final Exam 
Questions With 100% Correct Answers 
Most effective type of hearing protection? - answerplugs and earmuffs 
what is the highest safest step on a ladder - answerdon't use the top 2 rungs 
fire extinguisher class A, B, C, D - answerWood, Flammable liquids, elec...
Preview 2 out of 11 pages
Add to cartMillwright Alberta Period 1 Final Exam 
Questions With 100% Correct Answers 
Most effective type of hearing protection? - answerplugs and earmuffs 
what is the highest safest step on a ladder - answerdon't use the top 2 rungs 
fire extinguisher class A, B, C, D - answerWood, Flammable liquids, elec...
Millwright Exam Questions With 100% 
Correct Answers 
companies with stronger safety cultures usually have: 
-fewer at risk behaviors 
-lower accident rates 
-less employee turnover 
-lower absenteeism 
-higher productivity 
list the different types of electrical accidents: 
-burns 
-electrical shoc...
Preview 3 out of 29 pages
Add to cartMillwright Exam Questions With 100% 
Correct Answers 
companies with stronger safety cultures usually have: 
-fewer at risk behaviors 
-lower accident rates 
-less employee turnover 
-lower absenteeism 
-higher productivity 
list the different types of electrical accidents: 
-burns 
-electrical shoc...
Millwright Exam Prep Canada Questions 
With 100% Correct Answers 
What is the first step to perform routine maintenance on mechanical equipment? - 
answerIsolate and lock all energy sources. 
What is required when working from heights? - answerFall arrest equipment. 
What PPE is required when workin...
Preview 1 out of 3 pages
Add to cartMillwright Exam Prep Canada Questions 
With 100% Correct Answers 
What is the first step to perform routine maintenance on mechanical equipment? - 
answerIsolate and lock all energy sources. 
What is required when working from heights? - answerFall arrest equipment. 
What PPE is required when workin...
Millwright Exam Questions With 100% 
Correct Answers 2024/2025 
Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock 
loads 
a. more 
b. less 
c. equally 
d. slightly more - answerb. less 
What rope is considered to be a standard wire 
a. Lang lay 
b. right ...
Preview 2 out of 14 pages
Add to cartMillwright Exam Questions With 100% 
Correct Answers 2024/2025 
Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock 
loads 
a. more 
b. less 
c. equally 
d. slightly more - answerb. less 
What rope is considered to be a standard wire 
a. Lang lay 
b. right ...
Millwright Exam Prep Questions With 
100% Correct Answers 
1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will 
be ________lb if D1 = 4 inches. 
A. 160 
B. 256 
C. 384 
D. 240 - answerA. 160 
x/12.56 sq in = 100 lbs/7.85 sq in 
x = (100lbs/7.85 sq in)12.56 
x ...
Preview 2 out of 9 pages
Add to cartMillwright Exam Prep Questions With 
100% Correct Answers 
1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will 
be ________lb if D1 = 4 inches. 
A. 160 
B. 256 
C. 384 
D. 240 - answerA. 160 
x/12.56 sq in = 100 lbs/7.85 sq in 
x = (100lbs/7.85 sq in)12.56 
x ...
Millwright Exam Practice Questions With 
100% Correct Answers 
What is the fire triangle? 
Heat, fuel, oxygen 
PPE stands for what? 
Personal protective equipment 
Whose responsibility is it for you to wear Protective equipment in good order? 
Your own 
What class fire extinguisher is used for combu...
Preview 2 out of 8 pages
Add to cartMillwright Exam Practice Questions With 
100% Correct Answers 
What is the fire triangle? 
Heat, fuel, oxygen 
PPE stands for what? 
Personal protective equipment 
Whose responsibility is it for you to wear Protective equipment in good order? 
Your own 
What class fire extinguisher is used for combu...
Red Seal Millwright Review Test Questions 
With 100% Correct Answers 
1. What the fire triangle? - answerHeat, fuel, oxygen 
1. What the fire triangle? - answerHeat, fuel, oxygen 
PPE stands for what? - answerPersonal protective equipment 
Whose responsibility it for you wear Protective equipment in...
Preview 2 out of 7 pages
Add to cartRed Seal Millwright Review Test Questions 
With 100% Correct Answers 
1. What the fire triangle? - answerHeat, fuel, oxygen 
1. What the fire triangle? - answerHeat, fuel, oxygen 
PPE stands for what? - answerPersonal protective equipment 
Whose responsibility it for you wear Protective equipment in...
Millwright Level 4 practice test review Exam 
Questions And Answers 
The best method of alignment to apply when shafts can not be axially secured is? 
cross dialing 
Sag corrections in dial setting are applied only to? 
vertical rim readings 
limitations in use of cross dialing methods include subst...
Preview 3 out of 24 pages
Add to cartMillwright Level 4 practice test review Exam 
Questions And Answers 
The best method of alignment to apply when shafts can not be axially secured is? 
cross dialing 
Sag corrections in dial setting are applied only to? 
vertical rim readings 
limitations in use of cross dialing methods include subst...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller TheStar. Stuvia facilitates payment to the seller.
No, you only buy these notes for $45.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
75323 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now