NACE CIP PACKAGE

NACE SP0188 - Answer-High and Low Voltage Holiday Testing Low-Voltage Holiday Detector - Answer--Ground is attached directly to substrate. -Sponge saturated with a solution of tap water/wetting agent -Proper mix ratio 1oz/USgal -Proper of speed is 1ft/sec Double Stroke -Used on Coatings up to 2...

Corrosion - Answer-The deterioration of a material, usually a metal, that results from a reaction with its enviroment Passivation - Answer-a reduction of the anodic reaction rate of an electrode involved in corrosion What are the elements of a corrosion cell? - Answer-Anode, cathode, return path,...

What are Volatile Organic Compounds (VOCs)? - Answer-Chemicals that easily evaporate at room temperature. What are solvents? - Answer-Substances that dissolve other substances to form a solution. Why can solvents in coatings be harmful? - Answer-Because they can release VOCs into the air. What a...

When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that: - Answer-Synthetic oil or grease may not be identified To achieve consistently accurate results with ALL alt test equipment - Answer-wash your hands before sampling. When holiday testin...

How is the process of steel corrosion ALWAYS described? - Answer-electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - Answer-zinc, aluminum, magnesium A decrease in temperature will genera...

Dew point is the temperature at which - Answer-condensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred cours...