NFPA 70E F EXAM S BUNDLE

What does the general duty clause of the Occupational Safety and Health Act require of employers? - Answer-Provide a workplace free from recognized hazards What do safety-related work practices require regarding cell lines? - Answer-The cell line is not grounded through the welding machine. Yo...

If you are initiating the Incident Management System at a hazardous materials incident, the person assigned as the Safety Officer should be: trained to the technician level In response to an incident involving a jackknifed trailer, you arrive and size up the situation. From your position, you only...

Arrangement of 70E - Answer-Introduction (Article 90) Chapter 1 Safety Related Work Practices Chapter 2 Safety Related Maintenance Requirements Chapter 3 Safety Requirements for Special Equipment Annexes (Article 350) Arc Flash Hazard - Answer-A dangerous condition associated with the possibl...

What is mainly covered in chapter 2 of the NFPA 70E standard? C. Maintenace Which article in Chapter 1 of NFPA 70E contains common definitions? A. 100 The National Fire Association (NFPA) developed and maintains the NFPA 70E standard for electrical safety. What year represents the current editio...

NFPA 70E, Standard for Electrical Safety in the Workplace, consists of ? chapters, 16 informative annexes, the Foreword to NFPA 70E, and Article 90, Introduction. Chapter 1 is divided into ? articles. - Answer-3/5 The appointment of the NFPA 70E Committee was announced on January 7, ? , and was f...

2. For exposed 480 VAC energized conductors and using NFPA 70E Table 130.2(C) or the Shock Protection Boundaries and PPE Fermilab Summary table for NFPA 70E, the Restricted Approach Boundary for shock protection is a. 1 Inch b. 7 Inches c. 1 Foot d. 3 Feet 6 Inches - Answer-c 3. For energi...

(ANSI/AIHA Z10), American National Standard for Occupational Health and Safety Management Systems - Answer-provides a framework for establishing a comprehensive electrical safety program as a component of an employer's occupational safety and health programs. 1. Electrical Safety Program "Audit...

What are the guidelines for using CPR on a shock victim? - Answer-Begin CPR as soon as possible after de-energizing the source of shock Continue CPR until medical assistance arrives Secure the accident scene Don't delay rescue procedures On which three topics are unqualified workers req...

The 3 hazards of electricity are? - Answer-Shock, Arc Flash, Ark Blast When an individual disconnect device in an energized MMC has been locket out, that MCC is... - Answer-Still a potential Arc Flash risk When working within the restricted approach boundary which is REQUIRED in order to perfo...

false Working on energized circuits is part of the job and should be considered a routine part of the electrical work that an Electrical Worker performs. 1 and 4 Contractors and their clients are exposed to undue risks of increased insurance premiums and loss of production. & Workers expose t...