NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!NCCCO EXAM BUNDLE 2024!!
[Show more]
Where is the best location for leveling a crane? - ANSWERUpperworks When determining the "gross load" the best method is: - ANSWERGet an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - ANSWERBasket, vertical, choker What is the purp...
Preview 2 out of 5 pages
Add to cartWhere is the best location for leveling a crane? - ANSWERUpperworks When determining the "gross load" the best method is: - ANSWERGet an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - ANSWERBasket, vertical, choker What is the purp...
Which area do truck cranes without a 5th outrigger generally have no lifting capacity unless the manufacturer states otherwise? - ANSWERThe front What is the definition of "operating radius?" - ANSWERThe distance from the center of rotation of the crane to the center of gravity of the load ...
Preview 2 out of 5 pages
Add to cartWhich area do truck cranes without a 5th outrigger generally have no lifting capacity unless the manufacturer states otherwise? - ANSWERThe front What is the definition of "operating radius?" - ANSWERThe distance from the center of rotation of the crane to the center of gravity of the load ...
Before leveling a mobile crane on outriggers, an operator should ensure: - ANSWERthere is no weight of the crane bearing on any tires Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - ANSWERKeeping 90 degree angle between cylinder rod and ...
Preview 2 out of 11 pages
Add to cartBefore leveling a mobile crane on outriggers, an operator should ensure: - ANSWERthere is no weight of the crane bearing on any tires Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - ANSWERKeeping 90 degree angle between cylinder rod and ...
ASME B30.5 - ANSWERMobile and Locomotive cranes, all types ASME B30.3 - ANSWERTower Cranes ASME B30.23 - ANSWERPersonel Lifting Regs OSHA 29 CFR 1926.1400 Series - ANSWERCranes & Derrick's used in Construction regs. Rotation Resistant Wire Rope - ANSWER2 randomly broken wires in 6 dia...
Preview 2 out of 12 pages
Add to cartASME B30.5 - ANSWERMobile and Locomotive cranes, all types ASME B30.3 - ANSWERTower Cranes ASME B30.23 - ANSWERPersonel Lifting Regs OSHA 29 CFR 1926.1400 Series - ANSWERCranes & Derrick's used in Construction regs. Rotation Resistant Wire Rope - ANSWER2 randomly broken wires in 6 dia...
1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? a. Boom down b. Swing c. Boom up d. Extend boom - ANSWERc. 2. When hoisting personnel, within what percentage of level must ...
Preview 2 out of 15 pages
Add to cart1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? a. Boom down b. Swing c. Boom up d. Extend boom - ANSWERc. 2. When hoisting personnel, within what percentage of level must ...
Boom up - ANSWERWhat action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? 1% - ANSWERWhen hoisting personnel, within what percentage of level must a telescopic boom crane be in order for the g...
Preview 2 out of 5 pages
Add to cartBoom up - ANSWERWhat action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? 1% - ANSWERWhen hoisting personnel, within what percentage of level must a telescopic boom crane be in order for the g...
The term "Superstructure or Upper works" refers to the area of the crane: - ANSWERAbove the swing circle A crane must be level within _______% for the load chart ratings to be valid? - ANSWER1% Which of the following matches the appropriate load chart to a particular crane? - ANSWERSeria...
Preview 2 out of 13 pages
Add to cartThe term "Superstructure or Upper works" refers to the area of the crane: - ANSWERAbove the swing circle A crane must be level within _______% for the load chart ratings to be valid? - ANSWER1% Which of the following matches the appropriate load chart to a particular crane? - ANSWERSeria...
To provide protection in the crane's work area, barriers MUST be erected in accessible areas: A. Within machinery housing C. Within maximum radius D. In landing area - ANSWERB.Within the equipment's rotating structure All of the following can cause a two-block condition EXCEPT: A. Ex...
Preview 1 out of 4 pages
Add to cartTo provide protection in the crane's work area, barriers MUST be erected in accessible areas: A. Within machinery housing C. Within maximum radius D. In landing area - ANSWERB.Within the equipment's rotating structure All of the following can cause a two-block condition EXCEPT: A. Ex...
A frequent inspection is: - ANSWERDaily to monthly 1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? - ANSWERBoom Up (Appendix A to Subpart CC of Part 1926--Standard Hand Signals)...
Preview 2 out of 8 pages
Add to cartA frequent inspection is: - ANSWERDaily to monthly 1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? - ANSWERBoom Up (Appendix A to Subpart CC of Part 1926--Standard Hand Signals)...
The lattice boom is designed to take winds of up to 20 mph. from the side plus a full rated load, plus a direct side load equal to what percent of the rated load? - ANSWER2% The part of the load chart governed by stability is based on what percentage of capacity while a crawler crane is working o...
Preview 2 out of 5 pages
Add to cartThe lattice boom is designed to take winds of up to 20 mph. from the side plus a full rated load, plus a direct side load equal to what percent of the rated load? - ANSWER2% The part of the load chart governed by stability is based on what percentage of capacity while a crawler crane is working o...
Timber or steel - ANSWERThese materials should be used when setting up on soft surfaces such as soft ground, asphalt or backfilled material Over the corner - ANSWEROn crawler cranes, which boom position creates the greatest ground pressure Blocking - ANSWERAllows the weight of the crane and lo...
Preview 2 out of 9 pages
Add to cartTimber or steel - ANSWERThese materials should be used when setting up on soft surfaces such as soft ground, asphalt or backfilled material Over the corner - ANSWEROn crawler cranes, which boom position creates the greatest ground pressure Blocking - ANSWERAllows the weight of the crane and lo...
continuously - ANSWERduring all crane movements, asme b30.5 states that communication shall be maintained stop crane movements - ANSWERif the communication is disrupted at any time while the crane is operation, the operator shall osha 1926.1400 appendix a - ANSWEROSHA's standard method cran...
Preview 2 out of 7 pages
Add to cartcontinuously - ANSWERduring all crane movements, asme b30.5 states that communication shall be maintained stop crane movements - ANSWERif the communication is disrupted at any time while the crane is operation, the operator shall osha 1926.1400 appendix a - ANSWEROSHA's standard method cran...
When hook-suspended personnel platforms are lifted with a telescopic boom crane, - ANSWERAn anti two-block devise must be provided The safest maximum speed for a telescopic boom crane performing pick-and-carry operations is - ANSWERThe manufacturer's recommended speed limit When using blockin...
Preview 1 out of 2 pages
Add to cartWhen hook-suspended personnel platforms are lifted with a telescopic boom crane, - ANSWERAn anti two-block devise must be provided The safest maximum speed for a telescopic boom crane performing pick-and-carry operations is - ANSWERThe manufacturer's recommended speed limit When using blockin...
To provide protection in the cranes work area, barriers MUST be erected in accessible areas; - ANSWERWithin the equipment's rotating structure All of the following can cause a two-block condition except: - ANSWERRaising the boom When rotation of load may be hazardous, the operator must - AN...
Preview 2 out of 9 pages
Add to cartTo provide protection in the cranes work area, barriers MUST be erected in accessible areas; - ANSWERWithin the equipment's rotating structure All of the following can cause a two-block condition except: - ANSWERRaising the boom When rotation of load may be hazardous, the operator must - AN...
Crane configuration includes: A. reeving, boom length, counterweight, on outriggers, on rubbers, extensions or jibs stowed or mounted, off sets, wire rope type or construction B. hoist drum speeds, line pull, wire rope size and rigging C. load charts, LMI, axle weights and center of gravity ...
Preview 2 out of 6 pages
Add to cartCrane configuration includes: A. reeving, boom length, counterweight, on outriggers, on rubbers, extensions or jibs stowed or mounted, off sets, wire rope type or construction B. hoist drum speeds, line pull, wire rope size and rigging C. load charts, LMI, axle weights and center of gravity ...
Splices in rall tracks shall have - ANSWERSmooth Joints Hydraulic systems should have their proper fluid level checked - ANSWERDaily If power fails during operations, the following shouldn't apply - ANSWERDo your best to finish moving load where it was designated to go When cranes are er...
Preview 2 out of 13 pages
Add to cartSplices in rall tracks shall have - ANSWERSmooth Joints Hydraulic systems should have their proper fluid level checked - ANSWERDaily If power fails during operations, the following shouldn't apply - ANSWERDo your best to finish moving load where it was designated to go When cranes are er...
1. A wire rope that is a 6x19 classification could have how many wires per strand? - ANSWER15 through 26 wires per strand 2. How often should a synthetic web sling be inspected? - ANSWEREach day before use 5. Which of the following defects discovered during an inspection would cause for removi...
Preview 2 out of 5 pages
Add to cart1. A wire rope that is a 6x19 classification could have how many wires per strand? - ANSWER15 through 26 wires per strand 2. How often should a synthetic web sling be inspected? - ANSWEREach day before use 5. Which of the following defects discovered during an inspection would cause for removi...
TT 345-750V - ANSWER16ft TT TA 500-750V - ANSWER35ft TA TT 50-345V - ANSWER10ft TT TA 750-1000V - ANSWER45ft TA TA 50-200V - ANSWER15ft TA TA 350-500V - ANSWER25ft TA TT 750-1000 - ANSWER20ft TT TT .01-.75 - ANSWER4ft TT TA 200-350V - ANSWER20ft TA TA up to 50V - ANSWER10f...
Preview 2 out of 14 pages
Add to cartTT 345-750V - ANSWER16ft TT TA 500-750V - ANSWER35ft TA TT 50-345V - ANSWER10ft TT TA 750-1000V - ANSWER45ft TA TA 50-200V - ANSWER15ft TA TA 350-500V - ANSWER25ft TA TT 750-1000 - ANSWER20ft TT TT .01-.75 - ANSWER4ft TT TA 200-350V - ANSWER20ft TA TA up to 50V - ANSWER10f...
1. Base 2. Three-point bridge 3. Stabilizer beam 4. Slewing cylinder 5. Column 6. Inner (main) boom 7. Inner (main) boom cylinder 8. Stabilizer leg 9. Manual control station 10. Outer boom 11. Outer boom cylinder 12. Extensions 13. Extension cylinders 14. Link(s) 15. Load hook 16. Hyd...
Preview 2 out of 6 pages
Add to cart1. Base 2. Three-point bridge 3. Stabilizer beam 4. Slewing cylinder 5. Column 6. Inner (main) boom 7. Inner (main) boom cylinder 8. Stabilizer leg 9. Manual control station 10. Outer boom 11. Outer boom cylinder 12. Extensions 13. Extension cylinders 14. Link(s) 15. Load hook 16. Hyd...
When tower crane is erected/dismantled, written instructions must be - ANSWEROn site What must the crane operator do when a load is suspended - ANSWERRemain at the controls How often should the hoist rope be lubricated? - ANSWEREvery 200 hours If block is twisted, it may be necessary to fix t...
Preview 1 out of 4 pages
Add to cartWhen tower crane is erected/dismantled, written instructions must be - ANSWEROn site What must the crane operator do when a load is suspended - ANSWERRemain at the controls How often should the hoist rope be lubricated? - ANSWEREvery 200 hours If block is twisted, it may be necessary to fix t...
1) According to ASME, when rails are used for the crane support, the rails splices mus: - ANSWERA) be smooth 2) What is the task of high-tensile bolt connections between tower sections? - ANSWERA) To avoid fail. 3) According to the Tower Crane Reference Manual, how often should the hoist wire ...
Preview 1 out of 2 pages
Add to cart1) According to ASME, when rails are used for the crane support, the rails splices mus: - ANSWERA) be smooth 2) What is the task of high-tensile bolt connections between tower sections? - ANSWERA) To avoid fail. 3) According to the Tower Crane Reference Manual, how often should the hoist wire ...
4. Regular constructed crane hoist wire rope shall be taken out of service when any of the following conditions exist - ANSWERa. In running ropes, six randomly distributed broken wires in one lay b. Three broken wires in one strand in one lay C. Wear of one-third the original diameter of outside ind...
Preview 1 out of 4 pages
Add to cart4. Regular constructed crane hoist wire rope shall be taken out of service when any of the following conditions exist - ANSWERa. In running ropes, six randomly distributed broken wires in one lay b. Three broken wires in one strand in one lay C. Wear of one-third the original diameter of outside ind...
OSHA 1910 - ANSWERGeneral Industry Standards OSHA 1910.180 - ANSWERCrawler, Locomotive and Truck Cranes OSHA 1910.184 - ANSWERSlings OSHA 1926.251 - ANSWERRigging Equipment used for material handling OSHA 1926 - ANSWERConstruction Industry Standards OSHA 1926.1400 - ANSWERCranes and D...
Preview 2 out of 5 pages
Add to cartOSHA 1910 - ANSWERGeneral Industry Standards OSHA 1910.180 - ANSWERCrawler, Locomotive and Truck Cranes OSHA 1910.184 - ANSWERSlings OSHA 1926.251 - ANSWERRigging Equipment used for material handling OSHA 1926 - ANSWERConstruction Industry Standards OSHA 1926.1400 - ANSWERCranes and D...
A&L - ANSWERAntenna & Line Specialty: A designation of the NWSA Telecommunication Program ABC - ANSWERArticulating Boom Crane: A designation of the NCCCO Articulating Crane Program ANAB - ANSWERANSI National Accreditation Board: An accreditation body, formerly named ANSI ASME - ANSWERAmeric...
Preview 2 out of 8 pages
Add to cartA&L - ANSWERAntenna & Line Specialty: A designation of the NWSA Telecommunication Program ABC - ANSWERArticulating Boom Crane: A designation of the NCCCO Articulating Crane Program ANAB - ANSWERANSI National Accreditation Board: An accreditation body, formerly named ANSI ASME - ANSWERAmeric...
Timber or steel - ANSWERThese materials should be used when setting up on soft surfaces such as soft ground, asphalt or backfilled material Over the corner - ANSWEROn crawler cranes, which boom position creates the greatest ground pressure Blocking - ANSWERAllows the weight of the crane and lo...
Preview 2 out of 9 pages
Add to cartTimber or steel - ANSWERThese materials should be used when setting up on soft surfaces such as soft ground, asphalt or backfilled material Over the corner - ANSWEROn crawler cranes, which boom position creates the greatest ground pressure Blocking - ANSWERAllows the weight of the crane and lo...
The crane is out of level, you release the swing break, the boom swings downhill, your: - ANSWERLoad radius increases Blocking can be placed under the ends of tracks to: - ANSWERIncrease the cranes stability when Operating over front or back On lattice boom crane's fitted with power load Lo...
Preview 2 out of 5 pages
Add to cartThe crane is out of level, you release the swing break, the boom swings downhill, your: - ANSWERLoad radius increases Blocking can be placed under the ends of tracks to: - ANSWERIncrease the cranes stability when Operating over front or back On lattice boom crane's fitted with power load Lo...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller papersbyjol. Stuvia facilitates payment to the seller.
No, you only buy these notes for $48.51. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
67096 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now