MIS 589 Week 4
Discussion – Local
Area Network
LANs | GRADED A
,9/25/2016 Topic Print View
Week 4: Wired, Wireless LANs, and Backbone Networks
Discussion
LANs (graded)
Sally’s Shoes (mini case): Sally Smith runs a shoe store in the mall that is about 30 feet by 50 feet in size,
including a small office and a storage area in the rear. The store has one inventory computer in the storage area
and one computer in the office. She is replacing the tow cash registers with computers that will act as cash
registers but will also be able to communicate with the inventory computer. Sally wants to network the
computers with a LAN. What sort of LAN design would you recommend? What would be your suggestions to
improve the performance of this LAN?
Responses
Response Author Date/Time
LAN's Professor Gander 9/17/2016 6:24:03 PM
Class, what sort of LAN design would you recommend for Sally's Shoes?
RE: LAN's Karly Derosena 9/18/2016 5:14:25 AM
Modified:9/18/2016 5:58 AM
Sally should use 10BaseT or 100BaseT network solutions. 10BaseT is an Ethernet solution
which helps in transmitting data at 10Mbps over the telephone wires or twisted pair wire.
100BaseT is an Ethernet solution which helps in transmitting data at 100mbps.
Peer to peer or dedicated networks can be used. In peer to peer network, all the
computers on the network work as a client as a server.
No dedicated server is required in peer to peer network. While in the dedicated network,
one or more computers work permanently as the dedicated servers.
Sally should use dedicated network as she has to safe her inventory system and
dedicated network provides long run
Also large databases and large file can be handled easily. By using the following dedicated
network, sally can connect her LAN to another network.
Sally.png
RE: LAN's Jermaine Huggins 9/18/2016 10:03:24 PM
A network circuit is where computers must be physically connected by
network circuits to the other computers in the network.
Yet, Wired LAN’s provide many options for UTP, cable, shielded,
twistedpair (STP) cable or fiberoptic cable in a host of ways that can
be connected for transmission of data sent to the device.
However, in telecommunications, a circuit is a discrete (specific) path
between two or more points along which signals can be carried.
http://threadcontent.next.ecollege.com/(NEXT(9aa8e367917140bc999f3323f7766024))/Main/CourseMode/Topic/TopicPrintView.ed?topicID=7000009334576&so… 1/28
, 9/25/2016 Topic Print View
Unless otherwise qualified, a circuit is a physical path, consisting of
one or more wires (or wireless paths) and possibly intermediate
switching points. A network is an arrangement of circuits. In a dial
up (switched) connection, a circuit is reserved for use by one user for
the duration of the calling session. In a dedicated or leased line
arrangement, a circuit is reserved in advance and can only be used by
the owner or renter of the circuit.
Network circuits in my home network, a major carrier has connected
(ONT) 100 BaseT (Fiberoptic) and now will offer at some point (CAT
7/62.5/50). Currently, Fios running into my home is wireless and is
bundled Internet access, telephone and video (television) and a
wireless printer for printing capability to print from any location within
the home.
Reference:
Fitzgerald, Dennis, Durcikova, Business Data Communications and
Networking, 12th Ed., (2014), Wiley. (Chp. 7, page 186).
h p://wha뛕 s.techtarget.com/defini뛕 on/circuit
RE: LAN's Jermaine Huggins 9/18/2016 10:03:52 PM
I'll suggest having a wired LAN. Also because of the distance I'll suggest using STP
cables as running fiberoptic might just cost extra.
In my home, I have STP cable that runs from my modem to my wireless router with
switching capabilities that connects all of my devices, computers, laptops, and printer.
Her needs are similar so she can do the same, except the need for wireless.
RE:
Omolabake Dawodu 9/21/2016 9:36:11 AM
LAN's
I suggest Sally to use a simple. 10BaseT
Ethernet or at most a 100BaseT network
solution. The network can use wither peer to peer
or a dedicated server. However, a dedicated
server would be preferable for the long run and
cost will be an overriding concern because this is
probably a small business. As a matter of fact,
many organizations today install switched
100BaseT for their wired LAN's relatively because
of low cost and fast.
http://threadcontent.next.ecollege.com/(NEXT(9aa8e367917140bc999f3323f7766024))/Main/CourseMode/Topic/TopicPrintView.ed?topicID=7000009334576&so… 2/28
Discussion – Local
Area Network
LANs | GRADED A
,9/25/2016 Topic Print View
Week 4: Wired, Wireless LANs, and Backbone Networks
Discussion
LANs (graded)
Sally’s Shoes (mini case): Sally Smith runs a shoe store in the mall that is about 30 feet by 50 feet in size,
including a small office and a storage area in the rear. The store has one inventory computer in the storage area
and one computer in the office. She is replacing the tow cash registers with computers that will act as cash
registers but will also be able to communicate with the inventory computer. Sally wants to network the
computers with a LAN. What sort of LAN design would you recommend? What would be your suggestions to
improve the performance of this LAN?
Responses
Response Author Date/Time
LAN's Professor Gander 9/17/2016 6:24:03 PM
Class, what sort of LAN design would you recommend for Sally's Shoes?
RE: LAN's Karly Derosena 9/18/2016 5:14:25 AM
Modified:9/18/2016 5:58 AM
Sally should use 10BaseT or 100BaseT network solutions. 10BaseT is an Ethernet solution
which helps in transmitting data at 10Mbps over the telephone wires or twisted pair wire.
100BaseT is an Ethernet solution which helps in transmitting data at 100mbps.
Peer to peer or dedicated networks can be used. In peer to peer network, all the
computers on the network work as a client as a server.
No dedicated server is required in peer to peer network. While in the dedicated network,
one or more computers work permanently as the dedicated servers.
Sally should use dedicated network as she has to safe her inventory system and
dedicated network provides long run
Also large databases and large file can be handled easily. By using the following dedicated
network, sally can connect her LAN to another network.
Sally.png
RE: LAN's Jermaine Huggins 9/18/2016 10:03:24 PM
A network circuit is where computers must be physically connected by
network circuits to the other computers in the network.
Yet, Wired LAN’s provide many options for UTP, cable, shielded,
twistedpair (STP) cable or fiberoptic cable in a host of ways that can
be connected for transmission of data sent to the device.
However, in telecommunications, a circuit is a discrete (specific) path
between two or more points along which signals can be carried.
http://threadcontent.next.ecollege.com/(NEXT(9aa8e367917140bc999f3323f7766024))/Main/CourseMode/Topic/TopicPrintView.ed?topicID=7000009334576&so… 1/28
, 9/25/2016 Topic Print View
Unless otherwise qualified, a circuit is a physical path, consisting of
one or more wires (or wireless paths) and possibly intermediate
switching points. A network is an arrangement of circuits. In a dial
up (switched) connection, a circuit is reserved for use by one user for
the duration of the calling session. In a dedicated or leased line
arrangement, a circuit is reserved in advance and can only be used by
the owner or renter of the circuit.
Network circuits in my home network, a major carrier has connected
(ONT) 100 BaseT (Fiberoptic) and now will offer at some point (CAT
7/62.5/50). Currently, Fios running into my home is wireless and is
bundled Internet access, telephone and video (television) and a
wireless printer for printing capability to print from any location within
the home.
Reference:
Fitzgerald, Dennis, Durcikova, Business Data Communications and
Networking, 12th Ed., (2014), Wiley. (Chp. 7, page 186).
h p://wha뛕 s.techtarget.com/defini뛕 on/circuit
RE: LAN's Jermaine Huggins 9/18/2016 10:03:52 PM
I'll suggest having a wired LAN. Also because of the distance I'll suggest using STP
cables as running fiberoptic might just cost extra.
In my home, I have STP cable that runs from my modem to my wireless router with
switching capabilities that connects all of my devices, computers, laptops, and printer.
Her needs are similar so she can do the same, except the need for wireless.
RE:
Omolabake Dawodu 9/21/2016 9:36:11 AM
LAN's
I suggest Sally to use a simple. 10BaseT
Ethernet or at most a 100BaseT network
solution. The network can use wither peer to peer
or a dedicated server. However, a dedicated
server would be preferable for the long run and
cost will be an overriding concern because this is
probably a small business. As a matter of fact,
many organizations today install switched
100BaseT for their wired LAN's relatively because
of low cost and fast.
http://threadcontent.next.ecollege.com/(NEXT(9aa8e367917140bc999f3323f7766024))/Main/CourseMode/Topic/TopicPrintView.ed?topicID=7000009334576&so… 2/28
