ASNT Level III Basic Exam with 100% Correct Answers 2022-23

SNT-TC-1A is not intended to be used as a strict specification. - Correct answer-Which of the following statements is true concerning the usage of SNT-TC-1A? Written and stated in general terms - Correct answer-The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must be: May engage an outside service but is, nevertheless, responsible for the certification of the company's NDT personnel - Correct answer-With regard to the training of NDT personnel, the employer: To establish their own written practice for the qualification and certification of their NDT personnel - Correct answer-SNT-TC-1A is intended as a guideline for employers: The employer should review the detailed recommendations and modify them, as necessary, to meet its particular needs. - Correct answer-The following is a statement in SNT-TC-1A "It is recognized that these guidelines may not be appropriate for certain employers; circumstances and / or applications." What should be done if the guidelines are not appropriate? The individual's employer. - Correct answer-Who should be responsible to assess whether or not an individual should be qualified and certified who does not perform NDT, but monitors and evaluates NDT? Holographic testing - Correct answer-To which of the following NDT methods is SNTTC-1A currently not applicable With flexibility and reason - Correct answer-ASNT intended that the recommendations of SNT-TC-1A be applied The employer. - Correct answer-Of the following, which is most appropriate to determine the needs to qualify and certify personnel whose only NDT function is to operate digital thickness equipment. Written testimony of qualification. - Correct answer-Certification is It has been specified by the customer. - Correct answer-Use of SNT-TC-1A is mandatory when: Level I, Level II and Level III. - Correct answer-The basic levels of qualification recommended by SNT-TC-1A are: Weather any NDT personnel should be qualified and certified depends solely upon the needs of the employer and the requirements of the employer's customers or clientele. - Correct answer-Should personnel that operate ultrasonic digital thickness measurement equipment to qualified and certified The Trainee may not conduct nondestructive test independently and may not report test results - Correct answer-According to the recommendations of SNT-TC-1A which of the following is true concerning a Trainee's activities? Must train and examine the Level I and II personnel in his or her organization. - Correct answer-According to SNT-TC-1A, which of the following is not true for a Level III? Specific calibrations, Specific nondestructive test, specific evaluations.All of the above and record test result - Correct answer-According to written instructions, an NDT Level I may be qualified to perform: Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions provided that they are in accordance with written instruction of a Level III or designee. - Correct answer-May a Level I independently perform, evaluate and sign for results of nondestructive test with supervision and guidance from a Level II or III? The qualifications for Level III equal and exceed those of Level II. - Correct answerWhich of the following statements is true concerning the definitions of Trainee, Level I, II and III in SNT-TC-1A? Establish techniques - Correct answer-Which of the following is not within the scope of activities of a Level II individual, as recommended in SNT-TC-1A? May conduct on-the-job training and guidance of Level I personnel. - Correct answer-As recommended in SNT-TC-1A, a Level II: The Level III shall be capable of evaluating test results in terms of codes, standards and specifications. - Correct answer-According SNT-TC-1A which of the following is true for a Level III? The employer. - Correct answer-In Accordance with SNT-TC-1A, who is responsible for establishing a written practice for the control and administration of NDT personnel training, examination and certification? Should be described in the employer's written practice under all circumstance. - Correct answer-The responsibility of each level of certification for determining the acceptability of materials or components: Training, experience and education. - Correct answer-What factors are to be considered to ensure that a candidate for certification in NDT understands the principles and procedures involved? SNT-TC-1A does not currently provide a recommendation regarding overtime. - Correct answer-As recommended in SNT-TC-1A, which of the following is true? None of the levels - Correct answer-High school educations are recommended as a minimum requirement for: Differs for each of four major techniques. - Correct answer-In Leak testing, recommended work time experience and training: graduation from a 4-year university or college with a degree in engineering or science college or university plus 1 years' experience in NDT comparable to that of a Level II. - Correct answer-It is recommended that the education and experience of a Level III candidate include hourly basis. - Correct answer-Records substantiating training and experience for qualification are recommended to be kept on a(n): The sum of the times recommended for Level I and Level II - Correct answer-For a person being qualified directly to Level II with no time at Level I recommended experience consist of: Some methods require more initial training at Level I because of differences in complexity and manipulative skills. - Correct answer-In some cases, the training times recommended for Level I are greater than for Level II why? The same regardless of the candidate's education - Correct answer-The recommended number of training hours in a particular method are: Examinations to verify that the training material has been comprehended - Correct answer-It is recommended that a training program for qualification and certification purposes should include: Are included in CP-105 for the methods listed - Correct answer-Recommended training course outlines: Different based on educational background—————————— - Correct answer-For candidates with different educational backgrounds, recommended instruction periods are:—————————- Is available from a variety of sources. - Correct answer-Recommended training reference material: Technical principles of the method. - Correct answer-The recommended training course outline includes All questions to be used on examinations for Level I and Level II. - Correct answer-In accordance with SNT-TC-1A, the NDT Level III shall be responsible for: A qualified representative of the NDT Level III. - Correct answer-Which of the following may conduct a grade examinations for Level I and Level II personnel? Annually - Correct answer-How often should the near- vision acuity examination be administered ? Related to each employer's specific needs - Correct answer-As recommended in SNTTC-1A, physical examination requirements are intended to be: Basic test principles of the method - Correct answer-The General Examination is intended to cover: The general, basic and method examinations. - Correct answer-Questions and answers available from ASNT are intended for use in compiling: The General and Specific - Correct answer-Which of the following parts of Level I and Level II examinations should be written? Level I and Level II. - Correct answer-The practical examination is recommended to include operational familiarity with test equipment and analysis of test results for: Codes, specifications and procedures may be provided to examiness for reference during examinations provided that they do not contain date that can be used to answer questions in the General Examination. - Correct answer-Which of the following statements is true with regard to the administration of written examinations? During all examinations - Correct answer-For the written examinations, tables, graphs and charts may be used 10. - Correct answer-For Level I and Level II practical Examinations, one or more test specimens are recommended and the examinee should perform test and evaluations using the appropriate equipment and test specimens. The minimum number of different checkpoints recommended is: May delete the specific examination. - Correct answer-In certification of Level III personnel according to the recommendations of SNT-TC-1A, the employer 80 porcent. - Correct answer-For Level I and II examinations, the recommended minimum composite score is: