TCFP Inspector's Class II

TCFP Inspector's Class II Which of the following are a type of sprinkler? A) ESFR B) EC C) AF D) A and B Ans- A and B Foam water system design and installation requirements are regulated by ___________. A. NFPA 13 B. NFPA 13R C. NFPA 25 D. NFPA 16 Ans- NFPA 16 True or False, NFPA 72 allows only manual pull stations and water flow detection devices to be used on shunt systems. Fire detection devices are not permitted. Ans- True The fire alarm control panel (FACP) is essentially the _____ of the system. Ans- Brain Heat sensing fire detector color coding has a RED extra high temperature rating of? A.) 0-99f B.)175-249f C.) 325-399f D.) 500-575f Ans- 325-399f According to NFPA, travel distances to a manual pull station should not exceed _____ feet. A. 100 B. 200 C. 300 D. 400 Ans- 200 What color tag is used to indicate that an alarm system is impaired? A. White B. Yellow C. Blue D. Red Ans- Red About _____ % of fire deaths are attributed to smoke inhalation and not to burns. A. 55% B. 60% C. 65% D. 70% Ans- 65% When performing maintenance inspections of occupancies with alarm systems, the first step will be to: A) Check for green light indicating normal operation B) Confirm monitoring status with alarm company C) Confirm panel is locked and inaccessible to public D) Confirm system has been tested by licensed alarm contractor and has a current inspection tag AnsConfirm system has been tested by licensed alarm contractor and has a current inspection tag Most people are well aware of the dangers of fire but less aware of the dangers of smoke inhalation. About ___% of of fire deaths are attributed to smoke inhalation and not to burns. A) 65 B) 80 C) 92 D) 75 Ans- 65 If required, pull stations should be placed within ___ feet of every exit. a) 4 b) 5 c) 10 d) does not matter what distance, as long as it is not blocked Ans- 5 T or F: The development of clean-agent fire-extinguishing systems began in the late 1940s. Ans- True NFPA 10 has assigned a maximum travel distance of __ feet from the hazard to a Class K extinguisher? A) 30 B) 50 C) 75 D) 100 Ans- 30 If an extinguisher is suitable for use on a particular class of fire, the picture-symbol background is what color? A.) Red B.) Light Blue C.) Black D.) Grey Ans- Light Blue Which one of the following is not considered a proper placement of a fire extinguisher? A. Visible and marked with legible signage. B. Near Points of egress or ingress. C. Sitting on top of a work bench with no mount. D. Near formal paths of travel. Ans- Sitting on top of a work bench with no mount. Foam extinguishes a fire by one or more of the four following methods except: A. Smothering B. Seperating C. Suppressing D. Blanketing Ans- Blanketing In regards to carbon dioxide fire-extinguishing systems, total flooding systems are designed to deliver at least ___ percent concentration of CO into and enclosed area. A. 21 B. 19 C. 34 D. 15 Ans- 34 What is the fuel classification for combustible metals? A. Class A B. Class B C. Class C D. Class D Ans- Class D Most fire-extinguishing foam concentrates in use today are of the _____ type, which means they must be proportioned with water and mixed with air (aerated) before they can be used. A. mechanical B. electrical C. slippery D. bubbly Ans- mechanical A properly placed fire extinguisher will result in all of the following except: A. Visible, signage not necessary B. Not be blocked by storage or equipment C. Near points of egress and ingress D. Near normal paths of travel Ans- Visible, signage no