ADEX OSCE| 136 questions|
answers 100% correct
thickness of minor RPD connectors Correct Answer: 1.5 mm
Minimum space between vertical components of RPD Correct Answer:
5 mm
Kennedy Class I Correct Answer: bilateral distal extension
Kennedy Class II Correct Answer: unilateral distal extension...
ADEX OSCE| 136 questions|
answers 100% correct
thickness of minor RPD connectors Correct Answer: 1.5 mm
Minimum space between vertical components of RPD Correct Answer:
5 mm
Kennedy Class I Correct Answer: bilateral distal extension
Kennedy Class II Correct Answer: unilateral distal extension
Kennedy Class III Correct Answer: entirely tooth born with teeth
anterior and posterior
Kennedy Class IV Correct Answer: edentulous area anterior to
remaining teeth
Lingual bar distance from gingival margin Correct Answer: 3 mm
Lingual bar width (minimum) Correct Answer: 4 mm
Maxillary major connectors, how far from gingival margin Correct
Answer: 6 mm
Max RPD bead line width and depth Correct Answer: .75-1 mm
Anterior-posterior palatal strap, minimum distance between straps and
minimum width for each strap Correct Answer: 15 mm between, 6 mm
anterior and 8 mm posterior
,Palatal plate advised when? Correct Answer: The last abutment on
either side is a canine or premolar
Main function of indirect retainers Correct Answer: prevents vertical
dislodgement of the distal extension base away from tissues (sticky
food)
Minimum number of rests for RPD Correct Answer: 3
For a distal extension where is the rest on the most posterior tooth
Correct Answer: mesial
rest seat depth Correct Answer: 1.5 mm at marginal ridge and 2 mm in
center, at least 2.5 mm wide
what is prepared first? Guide planes or seats Correct Answer: guide
planes
extended occlusal rests used when? Correct Answer: used when most
posterior molar abutment is mesially tipped in class II (mod I) and class
III
Cingulum rest depths Correct Answer: 2 mm wide (F-L), 2.5-3 mm (M-
D), 1.5 mm deep
Guide plane position relative to height of contour for classes of RPD
Correct Answer: Class III and IV can end above the height of contour
because there is no functional movement. Class I and II must be below
the height of contour (to prevent torquing). With I-bars and mesial rests
on premolars, must end exactly at the height of contour.
, how to determine number of clasps Correct Answer: kennedy
classification + 1 (except for class IV)
Undercut of 0.01 Correct Answer: cast clasp
Undercut of 0.02 Correct Answer: wrought wire (0.5 mm and must be
at least 8 mm long, 18 gauge)
chromium provides what Correct Answer: corrosion resistance
cobalt provides what Correct Answer: rigidity
Nickel provides what Correct Answer: ductility
What muscle dictates the DB of the mand flange of a denture Correct
Answer: masseter
What muscle dictates the DL of the mand flange of a denture Correct
Answer: superior constrictor muscle
how far to trim back the custom tray from the mucosal reflection
Correct Answer: 2 mm
occlusion rim heights Correct Answer: maxillary 22 mm, mandibular 18
mm
The inferior surface of the maxillary occlusal rim should be parallel to...
Correct Answer: Camper's Line (Ala-tragus Line) and inter-pupillary line
primary and secondary support for mand denture Correct Answer:
primary - buccal shelf, secondary - alveolar ridge
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller StudyConnect. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
