General Aircraft Maintenance Practice Questions and Answers 2022/2023 with complete solution
0 view 0 purchase
Course
General Aircraft Maintenance
Institution
General Aircraft Maintenance
General Aircraft Maintenance Practice Questions and Answers 2022/2023 with complete solution
1. Because no one set of rules applies to all aircraft, what manual should you refer to for the tools, materials, and procedures required for a particular aircraft?
The maintenance instruction (MIM)
2....
general aircraft maintenance practice questions an
Written for
General Aircraft Maintenance
All documents for this subject (6)
Seller
Follow
katoinyambi96
Reviews received
Content preview
General Aircraft Maintenance Practice Questions and
Answers 2022/2023 with complete solution
1. Because no one set of rules applies to all aircraft, what manual should you
refer to for the tools, materials, and procedures required for a particular aircraft?
The maintenance instruction (MIM)
2. What is provided by the Tool Control Program?
A means for rapidly accounting for all tools after completing a maintenance task on an
aircraft or its related equipment.
3. What may result from tools left in an aircraft after maintenance has been
performed?
Major problemms, such as aircraft accidents and incidents and foreign object damage
(FOD)
4. How is the means by which tools can be rapidly inventoried and accounted
accomplished?
By using silhoutted locations that identify the place where the tool belongs.
5. What are "shadow boxes"?
Containers with silhouetted locations that identify the place where the tool belongs.
6. What inventory concept is the Tool Control Program (TCP) based on?
The instant concept and is accomplished, in part, thorugh the use of shadow boxes.
7. Who is responsible for coordinating the TCP and for ensuring that tools are
procured and issued in a controlled manner?
The material control officer
8.What does an approved tool control plan (TCPL) contain?
Information that includes material requirements, tool inventories, and detailed
instructions for the implementation and operation of the TCPL for a specific type/model
of aircraft.
9. What division is responsible for monitoring the overall Tool Control Program?
The Quality Assurance/Analysis (QA/A) division.
10. What information should be etched on all tools?
The organizattion code, work center, and tool container number.
11. Where should defective tools received from supply be reported?
The Fleet Material Support Office (FLEMATSUPPO) via CAT II Quality Deficiency
Reports (QDRs).
12. When are inventories of tools performed?
Prior to each task, before a shift change, when work stoppage occurs, and after
maintenance has been completed.
13. Who should be notified if any tool is found to be missing during the required
inventories?
The maintenance officer or assistant maintenance officer via the work center supervisor
and amintenance control.
14. Who has the responsibility for control of all tool containers and their keys?
Work center supervisors.
15. What program was established to inform workers about hazards and the
measures necessary to control them?
, The Navy Occupational Safety and Health (NAVOSH) Program
16. What is the purpose of the establishment of the Hazardous Material
Information System (HMIS) by the Department of Defense?
It is designed to acquire, store, and disseminate data on hazardous material procured
for use.
17. WWhat is the primary source for you to get the necessary information before
beginning any operation involving the use of hazardous material?
The Material Safety Data Sheet (MSDS), known as Form OSHA-20
18. What two manuals outline the chain-of-command responsibilities in regards to
occupational safety?
OPNAVINST 5100.19 (series) and OPNAVINST 5100.23 (series)
19. Who are responsible for training work center personnel in the use of the
MSDS?
Work center supervisors.
20. What should always be checked to ensure that you are using the correct
MSDS with the material being used?
Check the MISPEC, part number, federal stock number, and the name of the
manufacturer.
21. What is Threshold Limit Value (TLV)?
Found in sections II and V of the MSDS and refer to airborne concentraions of a
substancce and represent conditions that nearly all workers may be exposed, day after
day, without adverse effects.
22. What is the definition of a WARNING as found in most naval aviation technical
manuals?
An operating procedure, practice, or condition, etc., that may result in injury or death if
not carefully observed or followed.
23. What is the definitiion of CAUTION as found in most naval aviation technical
manuals?
An operating procedure, practice, or condition, etc., that may result in damage or
destruction to equipment if not carefully observed or followed.
24. What is a NOTE as defined in most naval aviation technical manuals?
An operating procedure practice, or condition, etc. that is essential to emphasize.
25. When should the word SHALL be used when referring to a safety hazard
procedure?
Only when applicatoin of a procedure is mandatory.
26. When is the word SHOULD used when referring to a safety hazard procedure?
Only when application of a procedure is recommended
27. When are the words MAY and NEED NOT used when referring to safety
hazards?
Only when application of a procedure is optional.
28. When is the word WILL used when referring to safety hazard procedures?
Only to indicate futurity, never to indicate any degree of requirrement for applciation of a
procedure.
29. What are visible lines?
Heavy unbroken linnes used to indicate visible edges of an object.
30. What are the hidden lines?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller katoinyambi96. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.
