Smog Check Procedures Manual 2023 Complete

Smog Check Procedures Manual 2023 Complete 1) Check for vehicle test restrictions (AWD, GVWR, etc). If test restrictions apply, inform the customer. 2) Ensure the customer is provided an estimate and the required test type is determined prior to drafting the invoice 3) Check hat all required equipment is up-to-date, maintained, and calibrated 4) Ensure vehicle is safe to test - What are the steps of the Pre-Inspection/Pre-Repair Check List? 1) If a stations lacks the equipment, tools, personnel, reference materials necessary to inspect a particular vehicle 2) If a station lacks the equipment, tools, personnel, reference materials necessary to repair a particular vehicle 3) If as a matter of policy, a test-and-repair does not repair certain types of vehicles or inspection failures - For what 3 reasons must a station reject a vehicle during the Pre-Inspection/Pre-Repair Check List? Enter "NONE" - If there is no license plate, what should you enter? Abort the test and start over using the correct info - What happens if an error is found after changes no longer can be made to the OIS or EIS? True, enter just the last 7 digits - Don't enter the "E" preceding the plate number of government vehicles. True or False? Enter "NONE" - If the odometer is missing or illegible, what should you enter into the EIS or OIS? Enter "R" for vehicle certification type - What should you enter for a vehicle equipped with a Referee label? 1) SPCNS 2) grey market 3) vehicles with an engine change - Which vehicles should you not inspect unless it has a BAR Referee Label? Enter the fuel in which the vehicle was operating when it arrived at the station - What fuel type should you enter for dual/bi-fuel vehicles? Motorhomes and heavy duty vehicles with a drive axle weight over 5,000 lbs. - Which '76-'99 vehicles in Enhanced Areas are excluded from ASM inspections and instead have TSI inspections? 1) AWD or 4WD 2) Traction control that cannot be disabled 3) Too large to safely fit on dynamometer 4) Heavy duty with GVWR of 8,501 or greater 5) Heavy duty with unloaded drive axle weight over 5,000 lbs - Which vehicle designs are not compatible with the ASM test? Vehicle is not currently transporting loads for delivery or is not carrying items of a temporary nature; excludes parts that have been welded, bolted, or perma