Dell Client Advanced 2022/23 Study Guide with Complete Solutions
The Edge Gateway 3000 series support the following power sources: - ANSWER-3-pin DC - In
Power over Ethernet (PoE 37V DC-57VDC)
Select the statements that are true about Trusted Platform Module (TPM) - ANSWER-
The Trusted Platform Module (TPM) is used to generate and store Keys.
It can create and store digital certificates.
It can also be used to enable the BitLocker hard drive encryption.
The OEM identity (ID) Module is a Utility used to replace the Dell Logo on the System Hardware like the Bezel. - ANSWER-False
When the side cover of Precision Tower 7920 is not assembled, the system will still power on. - ANSWER-False
ePSA stands for - ANSWER-Enhanced Pre-boot System Assessment
Which RAID is defined as Striped set without Parity? - ANSWER-RAID 0
In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM) together with the processor. There is no need to seperate the PHM from the processor. - ANSWER-True
What steps must be taken if there is a fan-related error message displayed at the Start up but the system boots to the OS? - ANSWER-
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider must select the manageability option upon first boot after replacement.
- ANSWER-True
We Import a Foreign configuration in a RAID Array, if: - ANSWER-The array containing the foreign configuration is in an Offline state.
Which indicator shows whether power is present or power fault has occurred in Precision systems? - ANSWER-Both
Where can the field Service Manual containing Critical Callout, Disassembly and Reassembly instructions be found? - ANSWER-PRM/ Educate Dell
The Edge Gateway 3000 series support the following power sources: - ANSWER-3-pin DC - In
Power over Ethernet (PoE 37V DC-57VDC)
Select the statements that are true about Trusted Platform Module (TPM) - ANSWER-
The Trusted Platform Module (TPM) is used to generate and store Keys.
It can create and store digital certificates.
It can also be used to enable the BitLocker hard drive encryption.
The OEM identity (ID) Module is a Utility used to replace the Dell Logo on the System Hardware like the Bezel. - ANSWER-False
When the side cover of Precision Tower 7920 is not assembled, the system will still power on. - ANSWER-False
ePSA stands for - ANSWER-Enhanced Pre-boot System Assessment
Which RAID is defined as Striped set without Parity? - ANSWER-RAID 0
In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM) together with the processor. There is no need to seperate the PHM from the processor. - ANSWER-True
What steps must be taken if there is a fan-related error message displayed at the Start up but the system boots to the OS? - ANSWER-
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider must select the manageability option upon first boot after replacement.
- ANSWER-True
We Import a Foreign configuration in a RAID Array, if: - ANSWER-The array containing the foreign configuration is in an Offline state.
Which indicator shows whether power is present or power fault has occurred in Precision systems? - ANSWER-Both
Where can the field Service Manual containing Critical Callout, Disassembly and Reassembly instructions be found? - ANSWER-PRM/ Educate Dell
